EisSound KBSound iSelect Manuale utente
USER’S MANUAL
SPACE
CC-1194ENG-01
1
Important Safety Instructions
Before installing the unit, please read and follow the instructions provided in the Installation Manual included
in this kit.
Before operating the unit, please read and follow the instructions provided in this User´s Manual thoroughly
and save it for future reference.
WARNING - To reduce the risk of fire or electric shock:
install in accordance with the manufacturer’s instructions
do not expose this apparatus to water dripping or splashing
do not use this product near water
do not attempt to disassemble this unit
do not block any ventilation openings
do not install near any heat sources such as radiators, stoves or other equipment that produce
heat.
You are cautioned that any changes or modifications not expressly mentioned in this manual could affect the
normal operation of this equipment.
This product has been designed and tested to provide reasonable protection against harmful interference in
residential installation. However there is no guarantee that interference will not affect in a particular
installation. In these cases, reorient the receiving antenna, try to increase the separation between the
equipment and the source of interference and/or connect the equipment into an outlet on a circuit different
from that to which the source of interference is connected.
The entire risk of the installation, use, results and performance are borne by you.
When a socket plug, or a device connector is used as a mechanism to disconnect from the electrical mains,
the mechanism must be easily accessible at all times. Protect the power cord from being walked on or
pinched particularly at plugs and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use a certified technician for installation, repair and/or maintenance of this equipment and comply with all
the regulations in force in each country. Servicing maybe required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to water dripping or splashing, does not operate normally, or
has been dropped.
To change the batteries remove the cover by pressing on the tab while lifting the cover.
Use batteries type AA 1,5V. Do not discard used batteries with household waste.
1. Introduction
2. General Operating Notes
3. Operating Audio Functions
6. Selecting Turn-On Mode
4. Operating the FM Tuner
Quick Reference Guide
Table of Contents
CAUTION
DO NOT OPEN
RISK OF ELECTRIC SHOCK
!
3
5
6
7
10
14
2
15
5. Operating the wireless accessory
KB BluetoothSOUND® ®
7. Technical specifications
16
8. FAQ´S
CC-1194ENG-01
2
Delete individual FM tuning pre-sets
Delete all FM tuning pre-sets
Store all FM stations detected
Store individual FM station pre-sets
Store “IDEAL” setting
Store turn-on mode (on/off)
Quick Reference Guide
Automatic FM station scan
Directly keying
FM station frequency (e.g. 95.8 MHz)
Numeric keypad
Play/pause for the playing list
Clear
Audio level adjustment
volume/bass/treble/balance/loudness
Select +/- keys function
volume/bass/treble/balance/loudness
FM Forced Mono
On/off
Step forward and back for the playing list.
FM/DAB memory pre-sets
1”
”IDEAL” mode
Select sound source
BLUETOOTH link
Program MONO for all sound sources
Automatic FM station search sensitivity
To illustrate that an operation requires holding down a
key on the remote control for a specific amount of time,
the symbol will appear in the manual next to the
key. The screen will display the symbol.
F
F
2”
6”
2”
2”
2”
6”
6”
FM SENS 1-2-3
2”
6”
KBSOUND XX
6”
Save the kit numeric identification for
Bluetooth pairing
DAB iPOD
AUDIO IN
KBSOUND XXFM SENS 1-2-3
UPDATE DAB
CC-1194ENG-01
KB
KB
KB
SOUND
SOUND
SOUND
The
®
®
®
®
®
iSelect
iSelect
iSelect
is a sound device specially designed for quick and easy installation. It fits discreetly into the decor of your kitchen, bathroom or
anywhere in your home. Now enjoy the world of music.
Kit comprises:
Electronic module with built-in FM tuner, power supply and a Bluetooth Accessory.
Two 2 1/2” or two 5" loudspeakers.
Remote control with the following functions:
Choose the audio source, FM or Bluetooth
Volume, bass, treble and balance control.
'Forced Mono' function.
FM and RDS information.
Ability to directly key-in desired station frequency.
Ability to automatically store into memory stations received with the best reception.
30 memory pre-sets.
“Intelligent”loudness: automatic adjustment to the volume level.
When connected with the (included in this kit), it
=
=
=
4
4
4
4
4
4
4
4
wireless Accessory allows the user to listen to the music stored in any device
that has the ability to transmit via Bluetooth.
KB BluetoothSOUND® ®
The components supplied in this kit are for installation and use in the manner and for the purpose described in the Installation Manual and
the User Manual. The installation must also comply with each country's current regulations. This manual assumes that the
unit has been installed following the instructions provided in the Installation Sheet included in this kit.
3
1. Introduction
CC-1194ENG-01
CC-1194ENG-01
KB
KB
KB
SOUND
SOUND
SOUND
The
®
®
®
®
SPACE
SPACE
SPACE
is a sound device specially designed for quick and easy installation. It is our new custom made audio solution. It´s open ended
allowing you to choose your loudspeakers and amplifiers to fulfill the specific design requirements of your dream project with superb sound.
Kit comprises:
An Electronic module with built-in FM tuner, improved wiring design and connecting terminals to facilitate connecting an external
amplifier and a
Infrared receiver / transmiter
Remote control with the following functions:
Choose the audio source, FM or Bluetooth
Volume, bass, treble and balance control.
'Forced Mono' function.
FM and RDS information.
Ability to directly key-in desired station frequency.
Ability to automatically store into memory stations received with the best reception.
30 memory pre-sets.
“Intelligent”loudness: automatic adjustment to the volume level.
When connected with the (included in this kit),
=
=
=
4
4
4
4
4
4
4
4
Bluetooth
SOUND
®Accessory.
wireless Accessory allows the user to listen to the music stored in any device that
has the ability to transmit via Bluetooth.
KB Bluetooth
® ®
The components supplied in this kit are for installation and use in the manner and for the purpose described in the Installation Manual and
the User Manual. The installation must also comply with each country's current regulations. This manual assumes that the
unit has been installed following the instructions provided in the Installation Sheet included in this kit.
4
5
1.- All of the functions only work (except ON/OFF) when the Remote Control is in “on”mode.
Once the is connected to the mains, it will remain powered even it is in OFF state. The OFF
state
KBSOUND2.- ®iSelect / Space
beep
5m
The
will turn on with the
audio and station frequency
settings saved as the “ideal”
mode settings (see chapters
3 and 6) when the unit is
connected to a power
supply.
When switched off and on
while connected to the
power supply, the audio and
station frequency settings
will be the same as when
the unit was last switched off
with the Remote Control
ON/OFF key
KBSOUND®iSelect /
Space
2. General Operating Notes
DAB iPOD
AUDIO IN
3.-
4.- The Remote Control unit exchanges information (transmits and receives data) by
means of the IR capsule in the loudspeaker grille. If at any time there is a failure in the
communication, the screen will display the symbol. In the event of this
occurring, point the Remote Control to the IR capsule at a straight-line distance of no
greater than 5 meters.
5.- The Remote Control display will automatically turn off when
there has been no keying activity for more than a few seconds,
ensuring more efficient battery usage. To view the display
information at any time, point the Remote Control to the
transmission-reception capsule and press the key of the
selected sound source at this time
A short BEEP sound signal indicates that the data has been received
AUDIO IN
iPOD
CC-1194ENG-01
6
Key Sequence Display
Increase/decrease in the volume level: The LED will flash
to indicate the desired change in volume.
Increase/decrease in bass/treble levels: The LED will flash
to indicate the desired change in the bass/treble levels.
Loudness: It reinforces the bass level in terms of the volume level, assuming a
greater backing at a lower volume and a lesser backing at a higher volume.
Mono/stereo reception: When activated, this feature allows the FM stations to be received in stereo.
When deleted this feature only allows for mono reception.
Note: If the electronic module´s configuration is mono, the signal will always be received in mono
even if the signal received by the antenna is in stereo.
If the electronic module is off, a brief press on the will turn on the unit .ON/OFF key
The LED will display the word “ON”
3. Operating Audio Functions
on
vol 58
BAS+06
LD on
STEREO
IDEAL
IDEAL
2’’
"IDEAL" mode of operation: To program your "IDEAL" mode of operation, select the sound source
(FM or BT) and desired levels of volume, bass, treble and loudness. Also, if your choice is FM, select
your favorite station. Then hold down the IDEAL key for 2 seconds.
This "IDEAL" mode can be instantly accessed by simply pressing the IDEAL key on the Remote Control.
CC-1194ENG-01
7
Key Sequence Display
To directly key-in an FM station frequency, sequentially dial the numeric keys of the station
frequency then press the FM key. For example, to select 94.7, press 9 4 7 FM.
Note: A station frequency can be keyed-in as either 94.7 (9 4 7 FM)
or as 94.70 (9 4 7 0 FM)
To clear a digit and start a different
frequency, press the C key
and then begin keying-in of the desired
frequency
4.2 Direct Key-in of Station Frequency
While the search is taking place, the word “SCAN”will appear on the display screen.
The screen will duly display the station frequency of the next station found.
4.1 Station Scan
4. Operating the FM Tuner
94.70
94.70
FM
FM
SCAN
102.50
FM
1”
CC-1194ENG-01
Key Sequence Display
4.4 Storing and Clearing Station Frequencies Manually
To , tune to the station (see Chapter 4.1. Station scan and 4.2. Direct key-in of
Station Frequency).
Hold down the 9 key for 2 seconds.
The station tuned at that time will be stored in the memory.
store a station
To , select the station and hold down the 7 key for 2 seconds.
The station will be deleted from the memory.
delete a station from the memory
The UP/DOWN keys allow you to scroll through the stations stored in the memory (see
Chapter 4.4 and 4.5, Storing and Clearing Stations in Memory).
When stations are stored in the memory they are sorted in ascending order; that is, beginning
with 87.5 and ending with 108.0.
The screen will display the frequency of the station stored in that memory pre-set.
4.3 Tuning to FM Memory Pre-Sets
MEM 07
DEL MEM
MEM 19
102.50
FM
94.70
FM
94.70
FM
2’’
2’’
8
CC-1194ENG-01
Key Sequence Display
To activate the process for all the
memory slots, hold down 4 key for 6 seconds.
clearing station frequencies automatically
To activate the process, hold down key 6 for 6
seconds.
When the automatic programming begins the screen will display the word “AUTO”.
The electronic module will store into the memory the stations that are received with the best
reception, sequentially from lowest frequency (87.5 MHz) to highest frequency (108.0 MHz).
The system will use all the memory slots available, reaching a maximum of 30.
The process can take a few moments. Once the scan has been completed or once the
maximum number of memory slots has been fully used, the process ends and a BEEP signal
sounds.
storing station frequencies automatically
4.5 Storing and Clearing Station Frequencies Automatically
To adjust the automatic station scan sensitivity (see chapter 4.1. Station
scan), select a value between 1 (minimum) and 3 (maximum) and press key
FM SEN for 2 seconds
4.6 Adjusting Station Scan Sensitivity
DEL ALL
AUTO
beep
6’’
6’’
SENS 1
FM SENS 1-2-3FM SENS 1-2-3
2’’
2’’
2’’
FM SENS 1-2-3
FM SENS 1-2-3
SENS 2
SENS 3
9
CC-1194ENG-01
Altri manuali per KBSound iSelect
6
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali EisSound Telecomando
