EK-Quantum Vector2 Strix RTX 3080 D-RGB Manuale utente

USER GUIDE

GPU WATER BLOCK

EK-Quantum

Vector² Strix/TUF RTX 4090 D-RGB ABP Set

Please note the installation of the product is intended to be undertaken

by an adequately trained and experienced person. You are installing the

product at your own risk. If you are not properly trained or experienced

or feel unsure about the installation procedure, please refrain from

installing the product yourself and contact our tech support for

assistance. We disclaim our liability for any damages to the product as

well as incidental, consequential, or indirect damages incurred due to

improper or inappropriate installation.

Before you start using this product, please follow these basic guidelines:

Carefully read the manual before beginning with the

installation process.

Remove your graphics card from the computer for the safest

mounting process to prevent any possible damage to your

GPU or its circuit board (PCB).

The EK Fittings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured by the

rubber O-ring gaskets.

The use of corrosion-inhibiting coolants is always

recommended for liquid cooling systems and mandatory for

nickel-plated water blocks!

Do not use pure distilled water!

For best results, EK recommends the use of EK-CryoFuel

coolants! To reach optimal performance, make sure to

thoroughly bleed the air out of your water block!

- 3 -

TABLE OF CONTENTS

BOX CONTENTS 4

WATER BLOCK DIMENSIONS 5

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS 6

NICKEL PLEXI 6

NICKEL ACETAL 7

PREPARING THE GRAPHICS CARD 8

REMOVING THE STOCK COOLER 8

ASUS TUF GAMING GEFORCE RTX 4090 8

PREPARING THE WATER BLOCK FOR INSTALLATION 10

CUTTING AND PLACING THERMAL PADS 12

APPLYING THERMAL COMPOUND 13

ATTACHING THE WATER BLOCK 13

OPTION 1: USING ASUS GEFORCE RTX 4090 STRIX 14

OPTION 2: ASUS GEFORCE RTX 4090 TUF GAMING 15

ATTACHING THE AC TIVE BACKPLATE 17

FITTINGS AND TUBING 18

INSERTING THE GRAPHICS CARD INTO THE CHASSIS 19

CONNECTING THE D-RGB LED STRIP 19

TESTING THE LOOP 20

WARRANTY 20

SUPPORT AND SERVICE 21

SOCIAL MEDIA 21

- 4 -

120 mm

24 mm

Thermal Grease (1 pc)

BOX CONTENTS

4 mm

8 mm

10 mm

EK-Loop Multi Allen Key (1 pc)

Allen Key 2 mm (1 pc)

Allen Key 2.5 mm (1 pc)

M2.5x8 AX1 Screw (1 pc)

Replacement I/O Bracket (1 pc) M3x10 AX1 Screw (1 pc)

EK-Quantum Vector2Strix/TUF

RTX 4090 D-RGB ABP Set M2.5x4 AX1 Screw (10 pcs)

Polyamid Washer M2.5 0.5mm (10 pcs)

Standoff Ø4.5/2.5 (1 pc)

Quantum Plug (2 pcs)

EK-Plug Out Spludger Tool (1 pc)

Standoff M2.5-M3 x 6.6mm (1 pc)

M3 x 6 DIN7991 Screw (2 pc)Nut M2.5 (2 pcs)

Terminal OR - Vector

14x1 mm (2 pcs)

EAN: 105934

EAN: 106046

Thermal Pad F 1.0 mm (6 pcs)

(3830046996732)

Thermal Pad F 1.5 mm (4 pcs)

(3830046996749)

Thermal Pad G 2.0 mm (3 pcs)

(3830046996794)

120 mm

16 mm

120 mm

16 mm

- 5 -

WATER BLOCK DIMENSIONS

260 mm

115.1 mm

143.1 mm

153 mm

141 mm

41 mm

35.5 mm

- 6 -

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS

NICKEL PLEXI

- Dimensions: (L x H x W): 260 x 153 x 41 mm

- D-RGB LED count: 24

- D-RGB cable length: 50 cm

- D-RGB connector 3-pin 5V digital LED header

Position EAN Description Quantity

1105919 Coldplate (Ni) 1

2105920 Top plate (Plexi) 1

3105926 LED Cover (Nat. Elox) 2

4103962 Plexi insert 1

5103987 Standoff M3.5-M2.5 x 3 mm 4

6103988 Standoff M4-M2.5 x 3 mm 4

7103986 Standoff M3.5-M2.5 x 11.3 mm 6

8103942 Terminal Badge 1

9104216 Disc magnet 3 x 3 4

10 104106 Terminal OR -14 x 1 mm 4

11 8311 Screw M4 x 20 DIN7984 6

12 105561 Replacement I/O Bracket (Black) 1

13 8472 Screw M3 x 6 DIN7991 2

14 8208 Screw M3 x 8 7991DIN 2

15 100663 EK - Badge 2

16 103964 Mylar sticker 2

17 9024 Screw M4 x 10 DIN7984 13

18 104099 Stand out (Acetal) 1

19 105991 FC Terminal bridge (Ni) 1

20 105989 FC Terminal (Acetal) 1

21 8201 Screw M3 x 10 DIN7991 2

22 104414 OR 52 x 2 mm 1

23 104086 ABP Terminal Badge 1

24 105931 Sideplate (Bl. Elox) 1

25 105981 Coldplate ABP (Ni) 1

26 105927 Top plate ABP (Plexi) 1

27 104093 Standoff M2.5-M3 x 6.6 mm 5

28 104105 Screw AX1 M3 x 10 mm 5

29 9013 Screw M4 x 8 DIN7984 13

30 105932 Main OR 150 x 2 mm 1

31 105933 Main OR ABP 147 x 2 mm 1

32 105935 PCB cardboard 1

33 100815 LED D-RGB strip 500/300 mm 2

- 7 -

NICKEL ACETAL

- Dimensions: (L x H x W): 260 x 153 x 41 mm

- D-RGB LED count: 38

- D-RGB cable length: 50 cm

- D-RGB connector 3-pin 5V digital LED header

Position EAN Description Quantity

1105919 Coldplate (Ni) 1

2105921 Top plate (Acetal) 1

3103962 Plexi insert 1

4103987 Standoff M3.5-M2.5 x 3 4

5103988 Standoff M4-M2.5 x 3 mm 4

6103986 Standoff M3.5-M2.5 x 11.3 mm 6

7103942 Terminal Badge 1

8104216 Disc magnet 3 x 3 4

9104106 Terminal OR 14 x 1 mm 4

10 8311 Screw M4 x20 DIN7984 6

11 105561 Replacement I/O Bracket (Black) 1

12 8472 Screw M3 x 6 DIN7991 2

13 100663 EK - Badge 2

14 9024 Screw M4 x 10 DIN7984 13

15 104296 LED D-RGB Strip 500/130 mm 1

16 8202 Screw M3 x 12 DIN7991 2

17 104211 Mylar sticker 2

18 105991 FC Terminal bridge (Ni) 1

19 105989 FC Terminal (Acetal) 1

20 8201 Screw M3 x 10 DIN7991 2

21 104414 OR 52 x 2 mm 1

22 104086 Terminal Badge 1

23 105931 Sideplate (Bl. Elox) 1

24 105981 Coldplate ABP (Ni) 1

25 105928 Top plate ABP (Acetal) 1

26 104093 Standoff M2.5-M3 x 6.6 mm 5

27 104105 Screw AX1 M3 x 10 5

28 9013 Screw M4 x 8 DIN7984 13

29 104102 Stand Out (Acetal) 1

30 104096 Light Guide 1

31 105932 Main OR 150 x 2 mm 1

32 105933 Main OR ABP 147 x 2 mm 1

33 105935 PCB cardboard 1

- 8 -

PREPARING THE GRAPHICS CARD

REMOVING THE STOCK COOLER

ASUS TUF GAMING GEFORCE RTX 4090

Important! Before starting, make sure to have a clean, ﬂat

surface to work on. It is recommended to put foam or soft

material to lay the graphics card on.

STEP 1

First, remove eight (8) screws from the backside of the Stock cooler

(using Phillips head screwdriver).

STEP 2

Unscrew three (3) screws from the I/O Bracket (using Phillips head

screwdriver). Unplug the connectors in order to remove the stock

cover from the GPU PCB.

STEP 1

STEP 2

- 9 -

STEP 3

From the front side of the GPU, an additional two (2) screws must be

removed (using Phillips head screwdriver). Detach the GPU Backplate.

STEP 4

Rotate the GPU and unscrew four (4) Screws from the retention

bracket (using Phillips head screwdriver). Remove the bracket and

Stock Cooler from the GPU PCB.

STEP 3

STEP 4

RETENTION

BRACKET

STOCK

COOLER

- 10 -

Allen Key 2.5mm

TERMINAL

BADGE

PREPARING THE WATER BLOCK FOR INSTALLATION

STEP 1

First, remove the terminal badge which is attached to the terminal with

two magnets. Under the badge, unscrew three (3) screws M4 x 20

DIN7984. Additional ﬁve (5) screws M3 x 10 AX1 need to be removed

(as shown in the image). Save the removed parts for later use.

DO NOT REMOVE THE UPPER TERMINAL BADGE!

STEP 1

For this step, you will need:

Phillips Head Screwdriver

M3 x 10 AX1 SCREW

M4 x 20 DIN7984 SCREW

UPPER TERMINAL BADGE

STEP 5

Lastly, unscrew four (4) Screws and detach the I/O Bracket (using

Phillips head screwdriver).

EK provides the replacement I/O Bracket with the water block.

STEP 5

I/O BRACKET

Altri manuali per Vector2 Strix RTX 3080 D-RGB

Indice

Altri manuali EK-Quantum Hardware per computer

EK-Quantum

EK-Quantum Velocity D-RGB - AMD Ryzen Edition Manuale utente

EK-Quantum

EK-Quantum Momentum2 ROG Strix X570-i Gaming D-RGB Manuale utente

EK-Quantum

EK-Quantum Velocity 2 D-RGB AM4 Manuale utente

EK-Quantum

EK-Quantum Reflection PC-O11D Mini D5 PWM D-RGB Manuale utente

EK-Quantum

EK-Quantum Reflection2 PC-O11D XL D5 PWM D-RGB Manuale utente

EK-Quantum

EK-Quantum AM5 Manuale utente

EK-Quantum

EK-Quantum Kinetic FLT Accent - Silver Manuale utente

EK-Quantum

EK-Quantum Vector FTW3 RTX 3080 Manuale utente

EK-Quantum

EK-Quantum Vector Strix RTX 3080 Backplate Manuale utente

EK-Quantum

EK-Quantum Reflection2 PC-O11D XL D5 PWM D-RGB Manuale utente

EK-Quantum

EK-Quantum Vector RTX 3080/3090 Backplate Manuale utente

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB Manuale utente

EK-Quantum

EK-Quantum Momentum2 ROG Strix X570-i Gaming D-RGB Manuale utente

EK-Quantum

EK-Quantum Vector Strix RTX 3080 D-RGB Manuale utente

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB Manuale utente

EK-Quantum

EK-Quantum Vector FE RTX 3070 Ti D-RGB + Backplate Manuale utente

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB Manuale utente

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB Manuale utente

EK-Quantum

EK-Quantum Reflection Fractal ATX D5 PWM D-RGB - Plexi Manuale utente

EK-Quantum

EK-Quantum Vector Strix RTX 3080 Backplate Manuale utente

EK-Quantum

EK-Quantum Reflection2 V3000 Plus D5 PWM D-RGB Plexi Manuale utente

EK-Quantum

EK-Quantum Vector Strix RTX 3080Ti Manuale utente

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB Manuale utente

EK-Quantum

EK-Quantum Impulse 120mm FAN Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente