ElectrIQ eiQ-32M4K144FS Manuale utente
2
3
CONTENTS
SAFETY
4
PARTS LIST
6
STAND ASSEMBLY
7
CONNECTIONS AVAILABLE
8
GETTING STARTED
8
MONITOR CONTROLS
8
INITIAL SET UP
9
SHORTCUT BUTTONS
9
MENU OPTIONS
10
INPUT SOURCE
10
PICTURE
10
COLOUR SETTINGS
11
ADVANCE SETTINGS
12
ULTRA HDR
12
AUDIO
13
QUICK LINK
13
OTHER
14
TECHNICAL SPECIFICATION
15
TROUBLESHOOTING
16
SUPPORT
16
4
SAFETY INFORMATION
•
Read these instructions - All the safety and operating instructions should be
read before this product is operated.
•
Keep these instructions - The safety and operating instructions should be
retained for future reference.
•
Heed all warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
•
Follow all instructions - All operating and usage instructions should be followed.
•
Do not use this equipment near water, or in humid environments - The
appliance should not be used near water or moisture e.g. in a wet basement or
near a swimming pool.
•
Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.
•
Do not block any ventilation openings.
•
Do not install near any heat sources such as radiators, stoves or other apparatus
(including amplifiers) that produce heat.
•
Do not tamper with the supplied plug. This plug is a BS1363 standard plug.
•
Protect the power cord from being walked on or trapped, particularly at the plug
and at the point where it exits from the appliance.
•
Only use attachments/accessories specified by the manufacturer.
•
Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer or sold with the apparatus. When a cart or stand is used, use
caution when moving it to avoid any injuries or damage from it tipping over.
•
Unplug the apparatus during lightning storms or when unused for long periods
of time.
•
Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as if the power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus or it has been exposed to rain or moisture, it does not operate
normally or has been dropped.
•
Please keep the unit in a well-ventilated environment.
•
The monitor should only be connected to a mains power supply as rated on the
back of the equipment.
•
To prevent overload, do not share the same power supply socket with too many
other electronic components.
•
Do not place any connecting wires where they may be stepped on or tripped
over.
5
•
Do not place heavy items on the cable as this may cause damage.
•
When removing from a socket hold by the plug and not the wires.
•
Disconnect the power immediately and seek professional help if the plug or
cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water
or moisture, if anything accidentally penetrates the ventilation slots or if the
unit does not work normally.
•
Do not remove the safety covers. There are no user serviceable parts inside.
Trying to service the unit yourself is dangerous and may invalidate the product's
warranty. Only qualified personnel should service this apparatus.
•
Do not block ventilation slots on the back cover. The monitor can be placed in a
cabinet but ensure at least 5cm (2") clearance all around. Do not tap or shake
the screen, this may damage internal components.
•
Due to our continuous product development, the operation and or features of
the product received may vary slightly from the information provided within the
manual.
•
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping or
splashing and objects filled with liquids, such as vases, shall not be placed on the
apparatus.
•
WARNING: The wall plug socket is used as a disconnection device and should
remain readily accessible.
•
Although every effort is made to maintain the accuracy of the manual, due to
continuous product development, some variation from the manual is possible.
•
The availability of features and settings may vary depending on the input source,
method of connection as well as the quality and specification of the cables used.
AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE
USER’S HEARING.
This warning sign is to
warn of dangerous
voltage inside the
product.
CAUTION: To reduce the risk of electric
shock, DO NOT remove the cover (or
back). No user serviceable parts inside.
Refer servicing to qualified service
personnel.
This warning sign is to alert
you of important
instructions accompanying
the product.
6
WHAT’S INCLUDED
USER MANUAL POWER SUPPLY POWER CABLE HDMI
NOTES:
⚫Due to the heavy weight and dimensions of the LCD screens and their fragile nature, we recommend
that they are unpacked and assembled by 2 people.
⚫electriQ and its distributors and dealers are not liable or responsible for damage or injury caused by
improper installation, improper use or failure to observe these safety instructions. In such cases any
guarantee will expire.
⚫The stand can be removed from the rear of the monitor by pressing the quick release button on the
rear of the monitor.
7
STAND ASSEMBLY
1. Open the package, take out the Styrofoam and place it flat on a table.
2. Remove the upper foam, remove the film bag from the monitor, and place the display on the lower
foam.
3. Take out stem and base, Lock them with 1 screws (KM4*12mm).
4. Insert the stem to the slot of back cover. Push the button on the stand board to remove.
5. Carefully hold the stand while lifting the monitor to an upright position (Note: During the process of
standing up the monitor, please do not pinch the screen directly with your hand to prevent the
screen from breaking)
8
CONNECTIONS AVAILABLE ON THE MONITOR
GETTING STARTED
MONITOR CONTROLS
Enter the Main OSD Menu and Select submenu
Go Up within the Main Menu or increase the value of the selected
item
Go Down within the Main Menu or decrease the value of the selected
item
Select signal source or Exit the menu
Turn the monitor On or Off
1. HDMI 2 (HDMI 2.1)
2. HDMI 1 (HDMI 2.1)
3. DP 2 (DP 1.4)
4. DP 1 (DP 1.4)
5. Audio Out
6. Power
9
INTIAL SETUP
Connect the monitor to a power outlet.
1. Press the power button on the monitor or to turn it on (The indicator will be blue).
2. Connect the relevant cable to the corresponding input on the monitor. The source will be
automatically detected.
3. To change between inputs, press the “Source” button to enter the source menu. Use the “ ” and
“ ”buttons to choose the input source between Auto Select,DP1,DP2 and HDMI1,HDMI2.
MENU OPTIONS
The menu for the monitor can be accessed by pressing the menu button on the control panel. This
menu is separated into the following sub menus: INPUT SOURCE, PICTURE, COLOUR SETTINGS,
ADVANCE SETTINGS, ULTRA HDR, AUDIO, QUICK LINK, OTHER, details of each menu can be
found in the following section. You can navigate through these menus by using the arrow buttons on
your monitor.
Input
DP1
DP2
HMDI1
HMDI2
10
OSD MENU
INPUT SOURCE
Signal
Switch the signal input or select the source between DP1, DP2,
HDMI1, HDMI2.
PICTURE
Brightness
Adjust the brightness of the display between 0 and 100.
Contrast
Adjust the contrast of the display between 0 and 100.
Sharpness
Adjust the sharpness value between 0-4.
Backlight
Adjust the backlight of the display between 0 and 100.
Indice
Altri manuali ElectrIQ Monitor
ElectrIQ
ElectrIQ eiQ-25FHD280TFSGH Manuale utente
ElectrIQ
ElectrIQ eiQ-32Q75HDR Manuale utente
ElectrIQ
ElectrIQ eiQ-15FHDPM-V2 Manuale utente
ElectrIQ
ElectrIQ EIQ-27MF144FSHDR Manuale utente
ElectrIQ
ElectrIQ eiQ-274K144IFSGHUCA Manuale utente
ElectrIQ
ElectrIQ eiQ-25FHD165TFSGH Manuale utente
ElectrIQ
ElectrIQ eiQ-DUAL15FHDPM Manuale utente
ElectrIQ
ElectrIQ eiQ-32MCV4KAFSHDR Manuale utente
ElectrIQ
ElectrIQ eiQ-27MQ95FSHDRU Manuale utente
ElectrIQ
ElectrIQ eiQ-34SUWD144FSHQ-V3 Manuale utente
ElectrIQ
ElectrIQ eiQ-43SUWD120FSHDR600 Manuale utente
ElectrIQ
ElectrIQ eiQ-34SUWD144FSHQ Manuale utente
ElectrIQ
ElectrIQ eiQ-27MF75I-V2 Manuale utente
ElectrIQ
ElectrIQ 24FHD75IS Manuale utente
ElectrIQ
ElectrIQ eiQ-27MF75I Manuale utente
ElectrIQ
ElectrIQ eiQ-27CVQHD165IFSGHLD Manuale utente
ElectrIQ
ElectrIQ eiQ-49CV5UWD120FSHQA Manuale utente
ElectrIQ
ElectrIQ eiQ-25FHDO165FSGUC Manuale utente
ElectrIQ
ElectrIQ eiQ-25FHD165TFSGH Manuale utente
ElectrIQ
ElectrIQ eiQ-274K144IFSGHUCA Manuale utente
