Electrolux IC44819FFS Manuale utente
051020xx/GB
20.17
Installation manual
Feeder Ironer Folder
& Stacker
IC44819FFS – IC44825FFS – IC44832FFS
Translated from french
.
00
0209
Notice Date Page
05102004
INSTALLATION
MANUAL 0. Table of contents
General instructions
Environmental information ........................................................................................... 1/1
Preliminary instructions ................................................................................................ 1/2
Locking and tagging procedure .................................................................................... 1/3
Handling/Weight
Handling ....................................................................................................................... 1/4
Packing - Weight .......................................................................................................... 1/5
Technical characteristics
Technical characteristics .............................................................................................. 1/6
Sound level .................................................................................................................. 7/6
Label of energetic performances .................................................................................. 7/6
Installation/Putting into service
Working place lighting .................................................................................................. 1/7
Supplies ....................................................................................................................... 1/7
Unpacking .................................................................................................................... 1/7
Remove of the transport locks tted ............................................................................. 2/7
Installation .................................................................................................................... 4/7
Mechanical installation ................................................................................................. 5/7
Electrical connection .................................................................................................... 7/7
Steam connection ........................................................................................................ 13/7
Gas connection ............................................................................................................ 15/7
Connection of the evacuation system .......................................................................... 23/7
Connection of the stacker ............................................................................................ 28/7
Compressed air connection ......................................................................................... 29/7
Operating inspection
Direction of the rotation checking ................................................................................. 1/8
Appendices
Washing symbols ......................................................................................................... 1/9
Conversion measurement units ................................................................................... 1/9
Pages/Chapters
The manufacturer reserves the right to modify construction and equipment characteristics.
0708 1 0
Notice Date Page
05102004 INSTALLATION
MANUAL
This page is left blank on purpose.
0. Table of contents
0308 1 1
Notice Date Page
05102004
INSTALLATION
MANUAL
Environmental information
Concerned by providing the end user with useful and necessary environmental information, we
wish to precise :
Data about energetic consumptions, wastes (atmospheric and liquid) and sound level are
indicated in the paragraph "Technical characteristics".
Forseeing its recycling, this machine is fully dismantle.
This machine is free from any asbestos.
Our machine packing complies with the provisions of rule 98-639 dated July 20th 1998
regarding environmental demands.
For additional information, do not hesitate to consult our environmental department.
Scrapping of machine
When the machine is no longer to be used, it must be submitted to a recycling facility for destruction. The
majority of the components in the machine can be reused, but it also contains other material that must be
taken care of in the correct way. Therefore, never mix the machine or its parts with domestic waste as this
may lead to health hazards or damage to the environment.
1. Environmental
information
0608 2 1
Notice Date Page
05102004 INSTALLATION
MANUAL
This page is left blank on purpose.
1. Environmental
information
0308 1 2
Notice Date Page
05102004
INSTALLATION
MANUAL
A ash of lightning with an arrow at
its end displayed inside an equilateral
triangle, warns the user about the
presence of uninsulated "dangerous
current" sufcient in intensity to cause
electrocution.
An exclamation mark inside an
equilateral triangle offers the user
important advice about usage, servicing
and hazardous conditions.
This symbol warns the user that there
are mechanisms inside the machine
which can be dangerous. The protective
housing must be in place during use.
This symbol warns the user of the
presence of high temperatures which
could cause severe burns. Some
surfaces can reach close to 200 °C
(392 °F).
Explanation of graphic symbols
Preliminary instructions
Before any use, it is compulsory to read the instruction handbook.
Users must have learnt how the machine operates.
In order to prevent any risk of re or explosion, ammable products should never be used to
clean the machine.
Any repair or maintenance intervention should be carried out by qualied personnel only.
2. Preliminary instruction
0308 2 2
Notice Date Page
05102004 INSTALLATION
MANUAL
2. Preliminary instructions
SAFETY
The mechanical and electrical installation
of the machine should only be done by
qualied personnel.
CAUTION
Do not use the machine unless it is
plugged into a correctly earthed power
socket complying with standards in
force.
CAUTION
For your personal safety, never use
the machine without the protective
housings.
CAUTION
Disconnect the machine electrical
power supply before doing any repair or
servicing work.
CAUTION
This machine should be installed
in conformance to the health and
safety regulations, and only used in a
sufciently aerated area.
Check the instructions before installing
or using the machine.
Disconnect all sources of energy and let the ironing cylinder cool down before any
intervention on the machine.
The high temperature of the ironing cylinder may cause serious burns ; avoid touching the hot
surfaces.
Never iron if the nger protection does not function.
The machines comply with the European Directive EMC (Electromagnetic Compatibility). They
have been tested in laboratory and approved as such. It is so prohibited to add wires or non
shielded electric cables in the cabinets, strands or cables' troughs.
0814 3 2
Notice Date Page
05102004
INSTALLATION
MANUAL
It is specially advised not to install the machine on a synthetic oor
covering. The frictional electricity may hinder the good working of
the machine.
Under no circumstances should a gas-heating machine be installed
in a building which includes a dry-cleaning machine.
This is particularly important for your safety and that of others.
The consequence is an immediate cancellation of the warranty.
The machine can work without the protective casing when the
electric supply is not cut off.
Interlock the main isolating switch with a padlock.
Close the steam inlet valves.
If you detect gas smells, turn off the gas, open the windows, do not
activate any switch and warn the maintenance service.
The warranty might be cancelled if these instructions are not
complied with.
2. Preliminary instructions
CAUTION
For your own safety, it is prohibited and dangerous to solder the
ironing cylinder. If a leak occurs, never try to repair it yourself.
Ask our technical departments for advice.
IMPORTANT
When using the machine in automatic folding mode, you could
catch your ngers when the sheet removal actuator ascends/
descends with the anti-static device and in folding arm
movements.
Do not operate on the machine without powering down
beforehand.
0608 4 2
Notice Date Page
05102004 INSTALLATION
MANUAL
2. Preliminary instructions
This page is left blank on purpose.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Electrolux Macchina piegatrice
