Electrophysics HOTSHOT Series Manuale utente
QuickStart: Electrophysics HOTSHOT
© 2011 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT 05641 / 800.636.9820 / www.thesnellgroup.com
Hotshot Page 1
1. MEMORY: Insert Compact Flash memory card into the slot under the rubber cover on
top of the camera.
2. POWER: Insert a charged battery into the battery bay on the bottom of the camera.
3. START: Push and hold (for one second) the Power Button on the top of the camera.
The touch screen display will turn on and the camera will go through a series of
boot up and self test procedures.
If the lens is in the parked position (rotated and covered) a screen will tell you to
rotate the lens to resume video
You should now see real time video image in the default “Start-up Screen”
display.
NOTE: The entire display is a touch screen, buttons and menu items can be activated by
touching or tapping with either the provided stylus or your finger.
4. FOCUS: (motor driven) From the default start-up screen move the
yellow Joystick Button up and down with your thumb.
In this mode moving the joystick left or right will operate the digital zoom function.
5. AUTO ADJUST: (Level and Span) When shows in the center position, level and span automatically
adjust based on the objects viewed.
6. MANUAL ADJUST: (Level and Span) From the default screen tap the
button. The lower menu will change to .
The Joystick Button will now manually control Level (up and down) and Span (left and right).
Pressing the center of the Joystick Button will auto adjust the image Level and Span.
To return to joystick focus: Tap the button. The lower bar will change to
and the Joystick Button will once again control focus as before.
Now taping between the button and button with your finger or stylus will toggle the function of
the Joystick Button between Level/Span and Focus.
7. PAUSE IMAGE: Pause or Freeze the image by momentarily pressing the front Trigger Button. (If
this is not an image you desire to save, abort the save by pressing the trigger button again and
return to a live image).
Battery Bay Lid
(slide back to open)
CF Memory Card Slot
Trigger Button
(push in)
Joystick Button
(left, right,
up, down, in)
Power Button
(push and hold to start)
Rotating Lens (down to park)
Stylus
Touch Screen Display (stylus or finger)
QuickStart: Electrophysics HOTSHOT
© 2011 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT 05641 / 800.636.9820 / www.thesnellgroup.com
Hotshot Page 2
8. SAVE IMAGE: By default the Hotshot will save the image to the storage card when it is present
and to the internal memory when it is not present. First, freeze the image as above, then press in
on the center of the Joystick Button when prompted on the main display screen.
9. CHANGE PALETTE: In any mode, tapping the palette color indicator bar will change the image
color palette to the next color choice.
10. EMISSIVITY:
Global Emissivity (Applies to line, area, and span values) is adjusted in Object Parameters:
Tap Menu, then under the Measure column tap the Object Parameters Icon.
Tap and change the Emissivity value using the stylus.
11. BACKGROUND COMPENSATION: (Reflective Temperature)
Tap Menu, then under the Measure column tap the Object parameters Icon.
oMake sure the “Use Camera Temperature” box is unchecked and has a red
X in the box indicating that you are not using ambient camera
temperature.
oNow tap and change the Compensation Value with the stylus.
Understanding the Touch Screen Display:
Models: Hotshot, Pro, XL, LT, B-View
Center point temp.
Minimum displayed temp. (lower span setting) Maximum displayed temp. (upper span setting)
Center point emissivity
Battery status Range indicato
r
WiFi signal strength (opt)
Gain (level/span) or zoom/focus
control indication
Opens menu display screen
x
Color palette indicator ba
r
Gain (level/span) mode select
Center point
Additional point temps &
emmisivities display here
IFOV =2.7 mRad (Theoretical with 160x120 Detector and standard 25˚x18˚lens) Detect 1in. target @ 30ft.
Indice
Altri manuali Electrophysics Telecamera IP
