Elefine EF-DM601 Manuale utente
1
EF-DM601 Intelligent
Thermal Imaging
Thermometer
Operation
Manual (V1.5)
2020-12
2
Statement:
1.The company reserves the right to modify any information in this document at any time.
This manual will be updated from time to time, updated content will be added in the new
version of the manual without notice.
2. This manual may contain technical inaccuracies or typographical errors.
3. The product is subject to the real object, and this document is only for reference.
4. If the operation is not in accordance with the guidance of this document, the user shall
bear the losses caused.
Safety Precautions:
1)When installing the equipment, please have qualified service personnel or system
installation personnel to operate.
2)Install the equipment in the environment with lightning protection measures.
3)Please do not touch the lens; prevent it from being damaged or dirty.
4)Please pay attention to prevent the lens from being worn, scratched or even torn.
5)Because uncooled infrared thermal imager uses very sensitive thermal sensors,
therefore, under no circumstances (power on or off), the lens shall be directly aimed at the
strong radiation source (such as the sun, direct laser beam or reflection, etc.), Otherwise,
it will cause permanent damage to uncooled infrared thermal imager
6)This product is a sophisticated electronic instrument, so please handle it carefully during
use, storage and transportation, prevent the equipment from being collided by external
force or falling from high place.
7)During transportation and storage, the ambient temperature shall not be lower than -
25 ℃; the original packing box must be used during transportation.
8)Before turning on the device, make sure that the power supply is connected properly. If
the power supply is connected incorrectly, the device may be damaged.
9)Do not press any object on the power line, and do not place the equipment where the
power line is easy touched.
10)If the equipment runs abnormally, please contact the supplier, do not dismantle the
equipment by yourself.
3
Version
Modification
Date
Modification
V1.3
2020.06.02
Revision
V1.4
2020.09.07
Revision
V1.5
2020.12.15
Revision2.9
Catalog
1.Outline.................................................................................................................................... 5
1.1Characteristics................................................................................................................ 6
1.2Composition.....................................................................................................................7
1.3 Monitor configuration requirements............................................................................7
2.Structure and Installation Instructions............................................................................... 7
2.1 Instrument Appearance................................................................................................ 7
2.2.Installation Notes........................................................................................................... 8
2.2.1 Shield Installation...................................................................................................... 8
2.2.2 Line connection.......................................................................................................... 8
4
1. HDMI interface: display device access (if the display does not have an HDMI
interface, you need to prepare HDMI to VGI or other adapter cables)................... 9
2. Network port: only needed for platform version......................................................9
3. Power interface: connect 5.5V DC power supply...................................................9
4. Audio interface: 3.5mm audio interface (optional HDMI and 3.5mm as sound
output)................................................................................................................................9
5. USB interface: connect peripherals.......................................................................... 9
2.3.Fixed Installation............................................................................................................9
3.Equipment Operating Instructions......................................................................................9
3.1 Running Back-End Software....................................................................................... 9
3.2 Front-end Software Interface.....................................................................................10
3.3 Face bias calibration (factory setting completed).................................................. 10
3.4 Black body position setting(Factory setting completed)........................................12
3.5 Black body parameter setting (factory setting completed)................................... 12
3.6 Alarm parameter setting.............................................................................................13
3.7 .........................................................14
3.8 Refresh time setting....................................................................................................14
3.9 Audio output settings.................................................................................................. 15
3.10 Platform connection settings (please contact technical staff if necessary)..... 16
3.11 Infrared imagery setting........................................................................................... 16
3.12 Mode selection setting............................................................................................. 17
3.13 Face detection display setting................................................................................ 18
3.14 Prompt sound setting............................................................................................... 18
3.15 Temperature display setting....................................................................................19
3.16 Population statistics setting.....................................................................................19
3.17 System language seting.......................................................................................... 20
3.18 System version Description.....................................................................................20
3.19 system firmware upgrade........................................................................................ 21
4.Photos of normal and high temperature personnel.......................................................22
5.Set the fixed IP address of the camera...........................................................................22
6.Precautions for use............................................................................................................ 23
5
1.Outline
EF-DM601 series product is a set of "Intelligent Thermal Imaging Thermometer" carefully
developed by our company. according to years of research and development experience
and customers' actual needs and market requirements. It can quickly check and alarm
people with fever symptoms in the crowd, accurately display the highest temperature
value. It can be combined with the face recognition system to determine the identity of
personnel, identify the listed personals and strangers, conducting fine management of
personnel and early warning and tracking of suspected fever.
6
1.1Characteristics
1.Non-contact full range human body temperature measurement: Uncooled full real-time,
high sensitivity thermal imaging, remote non-contact temperature measurement of human
body surface temperature.
2.High frame rate of temperature measurement: Frame rate up to 15Hz, close to real-time
imaging through naked eye observation.
3.Temperature measurement accuracy: ± 0.5℃without blackbody, and ± 0.2℃with a
blackbody.
4.Temperature measurement range: The system temperature measurement range is
-20~50 ℃.
5.Multi target automatic measurement: the system provides real-time dynamic thermal
image, which can realize multi-target automatic measurement, fast and accurate.
6.Automatic correction: It’s an intelligent temperature measurement system, which can
realize automatic correction of body surface temperature.
7.HD face collection: HD 2 million pixel network camera is used to collect HD face image.
8.Automatic face matching: Visible face photo and infrared face image automatic
matching, convenient for eye recognition and tracing.
9.Real time record: Real time record of passing personnel and body temperature, and do
automatic warning of suspected fever personnel.
10.Blackbody correction: The high configuration version can be configured with a
blackbody, can do high-precision correction automatically, completely eliminating
temperature drift. The equipment can work stably and reliably for a long time despite
interference from ambient temperature etc.
11.Face retrieval: It(The equipment) can be connected to the superior platform to realize
face retrieval from face database and capture database, get the moving track of persons,
especially the activity track of suspected fever persons, and locate quickly
12.Statistical analysis: It can be connected to the superior platform to get global control of
the data of passers-by, traffic and personnel with abnormal temperature, as well as do
macro analysis and display.
7
13.Deep learning face recognition algorithm: It can be deployed with independent
intellectual property rights dynamic face recognition algorithm to achieve dynamic,
high-speed, multi face detection, capture and recognition, and realize fine management of
personnels.
1.2 Composition
EF-DM601 Series Configuration List:
No
Accessory Name
Quantity
Unit
Remark
1
Facial Infrared Thermometry Engine
1
set
2
Front-end
acquisition
component
Infrared temperature
measurement module
1
set
Visible light module
1
set
Embedded motherboard
1
set
Black Body
1
set
5
Power Adapter
1
suite
6
Platform Server
1
set
Optional
1.3 Monitor configuration requirements
Demand configuration
2.Structure and Installation Instructions
2.1 Instrument Appearance
8
2.2.Installation Notes
2.2.1 Shield Installation
Step 1. Open the tripod packing box and take out the tripod and tripod accessories.
2.2.2 Line connection
9
1. HDMI interface: display device access (if the display does not
have an HDMI interface, you need to prepare HDMI to VGI or
other adapter cables).
2. Network port: only needed for platform version.
3. Power interface: connect 5.5V DC power supply.
4. Audio interface: 3.5mm audio interface (optional HDMI and
3.5mm as sound output).
5. USB interface: connect peripherals
2.3.Fixed Installation
Design and install the wiring according to the user's requirements, as shown in the figure:
3.Equipment Operating Instructions
3.1 Running Back-End Software
After booted, the system will automatically start and enter the client-side main interface.
10
3.2 Front-end Software Interface
The main interface is divided into temperature measurement areas and image display
areas:
1. Visible light real-time video display area
2. Real time video display area of infrared thermal imaging
3. Snapshot of normal temperature personnel
4. Over-temperature personnel capture area. When people passing by with temperature
exceeds the setting value, he (she) will be automatically captured and displayed, with
alarm sound.
3.3 Face bias calibration (factory setting completed)
Indice
