Eliminator Lighting LED Moon Beam Manuale utente

CAUTION! Please read and under-

stand these instructions before

installing or operating this unit.

Operating Instructions:

This unit is a 3 channel DMX intelligent LED unit. It can be run as a stand-alone or in a master-slave

configuration. The unit has 3 operating modes; sound active mode, auto mode or DMX controlled.

This unit has been tested at the factory, there is no assembly required. The unit is ready to be

plugged in to a power outlet. To run the different operating modes, see the next page. To enhance

the beams use this effect with a fog machine.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Caution! Never open unit when in use.

Always disconnect main power before

servcing. Remember to always replace

with the exact same type fuse.

LED Moon Beam

SPECIFICATIONS:

Model: LED Moon Beam

Supply Voltage: 100V ~ 240V 60Hz/50Hz

LEDs: 5 x 3W LEDs

Power Consumption: 30W

Weight: 5lbs./ 2.2kgs.

Size: 7.7” (L) x 8” (W) x 10.5” (H)

Fuse: 1 Amp

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 3

Colors: RGBWA

Warranty: 1 Year

Fuse Replacement: Locate and remove the unit’s power cord. Once the cord has been removed

located the fuse holder located inside the power socket. Insert a flat-head screw driver into the power

socket and gently pry out the fuse holder. Remove the bad fuse and replace with a new one. The fuse

holder has a built-in socket for a spare fuse be sure not to confuse the spare fuse with active fuse.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Auto Run Mode:

1. Plug the fixture in and press the MODE button until “AU.XX” is displayed. “XX” represents the

current set running speed.

2. Press ENTER and use the UP and DOWN buttons to adjust the running speed. The running

speed can be adjusted between “AU.00” (slowest speed) to “AU.99” (fastest speed).

Sound Active Mode:

In this mode the LED Moon Beam will react to sound.

1. Plug the fixture in and press the MODE button until “SU.XX” is displayed. “XX” represents the

sound senstivity level.

2. Press ENTER and use the UP and DOWN buttons to adjust the sound sensitivity, the sensitivity

can be adjusted between “SU.01” (least sensitive) to “SU.99” (most sensitive).

DMX Mode:

Operating through a DMX controller givesthe user the freedom to create their own programs tailored

to their own individual needs. The LED Mushroom has 3 DMX channels. See the chart on the next

page for the DMX traits and values.

1. This function will allow you to control each individual fixture’s traits with a standard DMX 512

controller.

2. To run your fixture in DMX mode press the MODE button until “AXXX” is displayed. “XXX” repre-

sents the current displayed DMX address. Press ENTER and use the UP or DOWN buttons to

find your desired DMX address.

3. After you have chosen your desired DMX address plug in the fixture via the XLR connections to

any standard DMX controller.

Master-Slave Configuration:

1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR data

cables to link your units together. Remember that the Male XLR connector is the input and the

Female XLR connector is the ouput. The first unit in the chain (master) will use the female XLR

connector only. The last unit in the chain will use the male XLR connector only.

2. Connect the rst “Slave” unit to the “Master.”

3. Set the “Master” unit to your desired mode of operation. On the “Slave” unit, set the DMX

address to “001”. The “Slave” unit will now follow the “Master”.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

DMX TRAITS: 3 CHANNELS

CHANNEL 1: COLOR MACROS

0 - 4 = BLACKOUT

5 - 9 = RED

10 - 14 = GREEN

15 - 19 = BLUE

20 - 24 = WHITE

25 - 29 = AMBER

30 - 34 = RED & GREEN

35 - 39 = GREEN & BLUE

40 - 44 = BLUE & WHITE

45 - 49 = WHITE & AMBER

50 - 54 = RED & AMBER

55 - 59 = GREEN & AMBER

60 - 64 = BLUE & AMBER

65 - 69 = RED & BLUE

70 - 74 = RED & WHITE

75 - 79 = GREEN & WHITE

80 - 84 = RED, GREEN, & BLUE

85 - 89 = GREEN, BLUE, & WHITE

90 - 94 = BLUE, WHITE, & AMBER

95 - 99 = RED, WHITE, & AMBER

100 - 104 = GREEN, WHITE, & AMBER

CHANNEL 1: COLOR MACROS

105 - 109 = RED, GREEN, & WHITE

110 - 114 = RED, GREEN, & AMBER

115 - 119 = RED, BLUE, & AMBER

120 - 124 = RED, BLUE, & WHITE

125 - 129 = GREEN, AMBER, & BLUE

130 - 134 = RED, GREEN, BLUE, & WHITE

135 - 139 = GREEN, BLUE, WHITE, & AMBER

140 - 144 = RED, GREEN, BLUE, & AMBER

145 - 149 = RED, GREEN, WHITE, & AMBER

150 - 154 = R/G/B/W/A

155 - 200 = COLOR CHANGE SLOW - FAST

201 - 250 = COLOR FADE SLOW - FAST

251 - 255 = SOUND ACTIVE

CHANNEL 2: STROBING/SOUND SENSITIVITY

0 - 255 = STROBING SLOW - FAST

0 - 255 = SOUND SENITIVITY ADJUSTMENT

LEAST SENSITIVE - MOST SENSITIVE

CHANNEL 3: LED ROTATION

0 - 255 = ROTATING SLOW - FAST

1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, LEDs, fuses, brushes and belts. Eliminator Lighting

warranty is only valid with-in the United States.

Altri manuali Eliminator Lighting Attrezzatura per DJ

Eliminator Lighting

Eliminator Lighting Stealth Wash Zoom Manuale utente

Eliminator Lighting

Eliminator Lighting E 138 Manuale utente

Eliminator Lighting

Eliminator Lighting Moon Beam Manuale utente

Eliminator Lighting

Eliminator Lighting TriDisc9 LED Manuale utente

Eliminator Lighting

Eliminator Lighting EM12 Manuale utente

Eliminator Lighting

Eliminator Lighting Mini Par RGBW LED Manuale utente

Eliminator Lighting

Eliminator Lighting Follow Spot 100 LED Manuale utente

Eliminator Lighting

Eliminator Lighting EZ8 System Manuale utente

Eliminator Lighting

Eliminator Lighting MEGA PAR PROFILE EP Manuale utente

Eliminator Lighting

Eliminator Lighting EM20 Manuale utente

Eliminator Lighting

Eliminator Lighting E 141 OCTO BAR Manuale utente

Eliminator Lighting

Eliminator Lighting Electro Swarm Manuale utente

Eliminator Lighting

Eliminator Lighting COSMIC BURST Manuale utente

Eliminator Lighting

Eliminator Lighting E 146 CYCLOPS Manuale utente

Eliminator Lighting

Eliminator Lighting Katana LED Manuale utente

Eliminator Lighting

Eliminator Lighting UV Disc Manuale utente

Eliminator Lighting

Eliminator Lighting Furious Five RG Manuale utente

Eliminator Lighting

Eliminator Lighting FROST FX BAR RGBW Manuale utente

Eliminator Lighting

Eliminator Lighting E 143 ASTEROID Manuale utente

Eliminator Lighting

Eliminator Lighting Mini Par UV LED Manuale utente

Eliminator Lighting

Eliminator Lighting LED CLOUD Manuale utente

Eliminator Lighting

Eliminator Lighting Electro 64 BLED Manuale utente

Eliminator Lighting

Eliminator Lighting EM30 Manuale utente

Manuali Attrezzatura per DJ popolari di altre marche

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuale del proprietario

Chauvet

Chauvet OVATION E-930VW Manuale utente

Zumtobel

Zumtobel APHRODITE Home Manuale utente

Snow Masters

Snow Masters Zig Oscillator Manuale utente

EuroLite

EuroLite 50530554 Manuale utente

Beamz

Beamz BUV243 Manuale utente

thomann

thomann Stairville DJ Lase 40-G MK-III Manuale utente

Eagletone

Eagletone 6 Eyes Flower Manuale utente

EuroLite

EuroLite FLD-1508 Manuale utente

Technical Pro

Technical Pro LG8xSEA Manuale utente

JB Systems

JB Systems Lounge Laser DMX Manuale utente

Lightmaxx

Lightmaxx Vega Halo 90 Manuale utente

Elation

Elation FUZE WASH Z350 Manuale utente

Maverick

Maverick MK3 WASH Manuale utente

Infinity

Infinity TF-260C7 Fresnel Manuale utente

Chauvet

Chauvet EVE E-50Z Manuale utente

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuale utente

KAM

KAM DMX Laser80 FScan Manuale utente