Elite Screens Evanesce B Series Guida

Evanesce/Evanesce Tension Vertical Limit Switch

Adjustment Instructions

Caution: The screen’s Top Black Masking is already set to its maximum distance. There is NO extra

black top drop in the roller. Attempting to increase the drop will damage the motor and VOID your

warranty with Elite Screens. DO NOT use these instructions to try and get more out of your

standard black masking drop. Please contact Elite Screens before making any adjustments.

A. If you over adjust the rise position the screen will attempt to go further into the case and

cause it jitter and bounce.

B. If you over adjust the drop position the screen will begin to reverse itself back up.

C. eversing the adjustments should bring the screen back to normal operation

1. Allen Wrench

Fig. 1

2. Limit switch adjustment holes

Note: The limit switches can only be viewed when the screen material is completely deployed.

They are located on the right side of the screen when facing the back.

Fig. 2

UP adjustment switch

DOWN adjustment switch

5/32” Allen wrench

Note: When turning the limit switches bear in mind that a full-circle in either direction will create

a one inch adjustment.

3. How to adjust the Retract (rise) position (shown in Fig. 3 to Fig. )

Fig. 3

Fig. 4

Fig. 5

Use the allen-wrench

to turn the UP switch

counter

clockwise

If the screen does not retract

completely (as shown in ig.

3), use the following steps.

Press the UP button on the

remote first to retract the

screen as much as possible.

NOTE: Adjustment should be made

while facing the back of the screen

Fig. 6

How to adjust the position of the top black masking border

(shown in Fig. 7 to Fig. 9)

Note: All electric screens come with standard top black masking and they cannot be dropped

further. DO NOT use these instructions to try to get more out of your standard black masking

drop.

Fig. 7

One full turn will retract your screen by 1”. In order

to see adjust ent, deploy and retract the screen.

(Warning: If you continue to rotate the switch once

the weight bar fits flush with the casing, the screen

will atte pt to retract further, causing da age to the

unit. DO NOT over turn the switch).

If you need to decrease the amount of

top black masking, refer to the

following steps.

If the screen retracts too far in, press the DOWN

button on the remote to expose the limit switches.

Rotate the UP adjustment switch 1-2 turns

clockwise. Then press the UP button on the

remote to see the new retract position.

Use your remote control to fully lower

the screen.

Fig. 8

Fig. 9

Note: As a rule, Elite Screens does not recommend making any unnecessary

adjustments to the screen, as improper adjustment will damage the unit.

Please contact Technical Support for assistance @ (877) 511-1211.

Use your allen-wrench to turn the

DOWN switch clockwise.

One full turn equals 1” of decreased drop. In order

to notice the adjust ent, retract and deploy the

screen. Warning: Over adjusting the switch will

da age the otor and void the warranty.

NOTE: Adjustment should be made

while facing the back of the screen

Altri manuali per Evanesce B Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Elite Screens Schermo di proiezione

Elite Screens

Elite Screens TE100HC2 Manuale utente

Elite Screens

Elite Screens Pop-Up Cinema Series Manuale utente

Elite Screens

Elite Screens Aeon CineGrey 3D AT Series Manuale utente

Elite Screens

Elite Screens ITE139XW3-E8 Manuale utente

Elite Screens

Elite Screens ezFrame R180WH1 Manuale utente

Elite Screens

Elite Screens TE100HC2 Manuale utente

Elite Screens

Elite Screens FE72V Manuale utente

Elite Screens

Elite Screens QuickFold Q100V Manuale utente

Elite Screens

Elite Screens Spectrum Series Manuale utente

Elite Screens

Elite Screens SilverFrame 100GH1 Manuale utente

Elite Screens

Elite Screens WB30VW Manuale utente

Elite Screens

Elite Screens OMS90H2 Manuale utente

Elite Screens

Elite Screens M100S Manuale utente

Elite Screens

Elite Screens Tab-Tension Series Manuale utente

Elite Screens

Elite Screens Sable Frame 2 Series Manuale utente

Elite Screens

Elite Screens Lights-On Portable Series Manuale utente

Elite Screens

Elite Screens 2 CLR Series Manuale utente

Elite Screens

Elite Screens Kestrel Series Manuale utente

Elite Screens

Elite Screens QuickFold Q100V Manuale utente

Elite Screens

Elite Screens CineTension 2 Dual Series Manuale utente

Elite Screens

Elite Screens StarFrame Series Manuale utente

Elite Screens

Elite Screens TE100HC2 Manuale utente

Elite Screens

Elite Screens Osprey Tension Dual Series Manuale utente

Elite Screens

Elite Screens Starling Series Manuale utente

Manuali Schermo di proiezione popolari di altre marche

FART PRODUKT

FART PRODUKT Standard SCREEN Manuale utente

Draper

Draper E Series Manuale

Laarhoven

Laarhoven Companion II Manuale utente

Renogy

Renogy RMS-LFPS-US Manuale utente

Da-Lite

Da-Lite ExecutiveElectrol Manuale utente

Samsung

Samsung S*H65* Manuale utente

FONESTAR

FONESTAR PPTR-43100-FA Manuale utente

Slide Clear

Slide Clear Varro XL Manuale utente

OS РХ-090Н Manuale utente

Niko

Niko 10-845 Manuale utente

Speaka Professional

Speaka Professional 2357532 Manuale operativo

Sima

Sima XL-72 Manuale utente

Jasic

Jasic EVO 2.0 ET-200P Manuale utente

InFocus

InFocus SC-WALL GRY-92H Manuale

Barco

Barco OverView MVL-615 Manuale utente

Draper

Draper Envoy Manuale

SI Dynamic 2 XL Manuale utente

Draper

Draper Nocturne+ E Istruzioni per l'installazione