Elko RFWB-20/G Manuale utente

WIRELESS SWITCH

SOCKET

(CLASSIC VERSION)

Combination of iNELS wall-mounted wireless controller and switch socket.

Schuko British French

Content

The individual elements in the iNELS set are paired and their functions are preset.

iNELS Wireless switch socket enables the basic function of controlling electrical appliances - ON / OFF.

The settings of the wall controllers can be changed - see detailed manuals of iNELS elements.

On-wall button controller PLASTIC - 2 buttons

RFWB-20/G

Switching socket-plug

RFSC-61N

switch unit

OFF

switch unit

EAN 8595788183215 (On-wall button controller PLASTIC - 2 buttons + Switching socket-plug “French“)

EAN 8595788183314 (On-wall button controller PLASTIC - 2 buttons + Switching socket-plug “British“)

EAN 8595788183413 (On-wall button controller PLASTIC - 2 buttons + Switching socket-plug “Schuko“)

RFWB-20/G

On-wall button controller PLASTIC

2 buttons - RFWB-20/G

Characteristics

• The wireless controller is used to control switches and dimmers

(lights, gate, garage door, blinds, etc.).

• RFWB-20/G: two buttons enable control one or two units independently (depending on the

type of switching element).

• The ﬂat design with level base makes it ideal for fast installation on any surface (ﬁxation with

adhesive or screws in the installation box).

Safe handling

Replacement of a battery RFWB-20

Using a screwdriver,

carefully pry o

the device from the

frame.

Gently pull to

remove the cover.

Slide the CR2032

battery into the

battery holder.

Observe the

polarity.

Snap on the cover.

The LED opening

must be located

in the upper part

(for the RFWB-

40, observe the

positioning of the

left and right cover

Place the frame

on the rear part.

Snap the device

with the cover

into the prepared

frame.

When handling a device unboxed it is important to avoid contact with liquids. Never place the device

on the conductive pads or objects, avoid unnecessary contact with the components of the device.

Detailed manual

RFWB-20/GTechnical parametres

Attention:

When you instal iNELS RF Control system, you have to keep minimal distance 1 cm between each units.

Between the individual commands must be an interval of at least 1s.

Supply voltage:

Transmission indication:

Number of buttons:

Transmitter frequency:

Signal transmission method:

Range in free space:

Other data

Operating temperature:

Operating position:

Mounting:

Protection:

Contamination degree:

Dimensions:

LOGUS90 frame - plastic:

LOGUS90 frame

- metal, glass, wood, granite:

Weight:

Related standards:

3 V battery CR 2032

red LED

868.5 MHz

unidirectionally addressed message

up to 200 m

-10 ... +50 °C (14 ... 122 °F)

any

glue, screws

IP20

85 x 85 x 16 mm (3.3“ x 3.3“ x 0.6“)

94 x 94 x 16 mm (3.7“ x 3.7“ x 0.6“)

38g * (1.3 oz)

EN 60669, EN 300220, EN 301489

* Comes with plastic frame.

RFSC-61N

Switching socket-plug RFSC-61N

(Schuko, French, British)

Characteristics

• The switched socket with 1 output channel is used to control fans, lamps, heaters and appliances,

which are connected by a power cord.

• They can be combined with detectors, controllers, iNELS RF Control system components.

• Thanks to the socket design, installation is simple by direct insertion into the existing socket.

• It enables connection of the switched load up to 16A (4.000 W).

• Multi-function design - button, impulse relay and time function of delayed ON or OFF with time

setting of 2 s - 60 min.

• The switched socket may be controlled by up to 32 channels (1 channel represents 1 button on

the controller).

• The programming button on the socket is also used for manual control of the output.

• Memory status can be pre-set in the event of a power failure.

• Range up to 200 m (in open space), if the signal is insucient between the controller and unit,

use the signal repeater RFRP-20 or protocol component RFIO2that support this feature.

• Communication frequency with bidirectional protocol iNELS RF Control2(RFIO2).

• Produced in 3 designs of sockets and plugs.

Detailed manual

Assembly

RFSC-61 N/230VTechnical parameters

230 V / 50-60Hz

7 VA

0.7 W

+10 %; -15 %

1x switching (AgSnO2)

16 A / AC1

4000 VA / AC1, 384 W / DC

30 A / < 3 s

250 V AC1 / 24 V DC

500 mW

3x107

0.7x105

button PROG (ON/OFF)

-15 ... + 50 °C (5 ... +122 °F)

any

IP30

III.

63 x 110 x 74 mm

129 g

EN 60730, EN 63044, EN 300 220, EN 301 489

Supply voltage:

Apparent power:

Dissipated power:

Supply voltage tolerance:

Output:

Number of contacts:

Rated current:

Switching power:

Peak current:

Switching voltage:

Min. switching power DC:

Mechanical service life:

Electrical service life (AC1):

Control:

Manual control:

Other data:

Operating temperature:

Working position:

Protection:

Overvoltage category:

Contamination degree:

Dimensions:

Weight:

Related standards:

60 - 90 % 80 - 95 % 20 - 60 % 0 - 10 % 80- 90 %

RFRP-20

Compatibility

The device can be combined with all system components, controls and devices

of iNELS RF Control and iNELS RF Control2.

The detector can be assigned an iNELS RF Control2(RFIO2) communication protocol.

Radiofrequency signal penetration through various construction materials

brick walls wooden structures

with plaster boards reinforced

concrete metal partitions common glass

Range up to 200 m (2 inch) in open space,

Warning

Instruction manual is designated for mounting and also for the usage of the device. It is always a part of its pac-

king. Installation and connection can be carried out only by a person with adequate professional qualiﬁcation

with understanding this instruction manual and functions of the device, and while observing all valid regulations.

Trouble-free function of the device also depends on transportation, storing and handling. In case you notice any

sign of damage, deformation, malfunction or missing part, do not install this device and return it to its seller.

It is necessary to treat this product and its parts as electronic waste after its lifetime is terminated. Before

starting installation, make sure that all wires, connected parts or terminals are de-energized. While mounting

and servicing observe safety regulations, norms, directives and professional, and export regulations for working

with electrical devices. Do not touch parts of the device that are energized – life threat. Due to transmissivity

of RF signal, observe correct location of RF components in a building where the installation is taking place. RF

Control is designated only for mounting in interiors. Devices are not designated for installation into exteriors

and humid spaces. The must not be installed into metal switchboards and into plastic switchboards with metal

door – transmissivity of RF signal is then impossible. RF Control is not recommended for pulleys etc. – radio-

frequency signal can be shielded by an obstruction, interfered, battery of the transceiver can get ﬂat etc. and

thus disable remote control.

Designed & Manufactured by:

ELKO EP, s.r.o. Palackého 493, 769 01 Holešov, Všetuly,

Czech republic, www.elkoep.com, Hotline: +420 800 100 671

Altri manuali per RFWB-20/G

Questo manuale è adatto per i seguenti modelli

Altri manuali Elko Accessori

Elko

Elko iNels RFSC-61N Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Elko

Elko SmartSensor Manuale utente

Elko

Elko Inels Air AirQS-101NB Manuale utente

Elko

Elko iNELS RFDSC-71 Manuale utente

Elko

Elko Inels RFDSC-11 Manuale utente

Elko

Elko DCL Manuale utente

Elko

Elko iNels RFDSC-71N Manuale utente

Elko

Elko Inels RFSC-11 Manuale utente

Elko

Elko iNELS Air AirSOU-100S Manuale utente

Elko

Elko iNels RFSC-61N Manuale utente

Elko

Elko INELS Air Series Manuale utente

Elko

Elko inelsAir AirSOU-100NB Manuale utente

Elko

Elko iNels RFDSC-71N Manuale utente

Elko

Elko Inels Air AirQS-100NB Manuale utente

Elko

Elko iNELS Air AirQS-101 Manuale utente

Elko

Elko iNels RFSC-11 Manuale utente

Elko

Elko Inels RFDSC-71 Manuale utente

Elko

Elko Inels AirQS-101S Manuale utente

Elko

Elko iNELS RFDSC-71 Manuale utente

Elko

Elko iNELS Air AirIM-100NB Manuale utente

Elko

Elko SmartDim Puck Uni Manuale utente

Elko

Elko iNELS Air AirCFS-100NB Manuale utente

Elko

Elko iNELSAir AirQS-100 Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuale utente