Elmo Ceiling Presenter HV-C1000XG Manuale utente

CEILING PRESENTER

HV-C1000XG

INSTRUCTION MANUAL

Please read this instruction manual carefully before using this product and keep it for future reference.

IMPORTANT SAFEGUARDS

■Read Instructions – All the safety

and operating instructions should be

read before the appliance is

operated.

■Retain Instructions – The safety and

operating instructions should be

retained for future reference.

■Heed Warnings – All warnings on

the product and in the operating

instructions should be adhered to.

■Follow Instructions – All operating

and use instructions should be

followed.

■Cleaning – Unplug this product

from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for

cleaning.

■Attachments – Do not use

attachments not recommended by the

product manufacturer as they may

cause hazards.

■Water and Moisture – Do not use

this product near water - for example,

near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet

basement, or near a swimming pool,

and the like.

■Accessories – Do not place this

product on an unstable cart, stand,

tripod, bracket, or table. The product

may fall, causing serious injury to a

child or adult, and serious damage to

the product. Use only with a cart,

stand, tripod, bracket, or table

recommended by the manufacturer, or

sold with the product. Any mounting

of the product should follow the

manufacturer's instructions, and

should use a mounting accessory

recommended by the manufacturer.

■Ventilation – Slots and openings in

the cabinet are provided for

ventilation and to ensure reliable

operation of the product and to

protect it from overheating, and these

openings must not be blocked or

covered. The openings should never

be blocked by placing the product on

a bed, sofa, rug, or other similar

surface. This product should not be

placed in a built-in installation such as

a bookcase or rack unless proper

ventilation is provided or the

manufacturer's instructions have been

adhered to.

■Power Sources – This product

should be operated only from the type

of power source indicated on the

marking label. If you are not sure of

the type of power supply to your

home consult your appliance dealer

or local power company. For products

intended to operate from battery

power, or other sources, refer to the

operating instructions.

■Grounding or Polarization – This

product may be equipped with either

a polarized 2-wire AC line plug (a

plug having one blade wider than the

other) or a 3-wire grounding type

plug, a plug having a third

(grounding) pin. The 2-wire polarized

plug will fit into the power outlet only

one way. This is a safety feature. If

you are unable to insert the plug fully

into the outlet, try reversing the plug.

If the plug still fails to fit, contact your

electrician to replace your obsolete

outlet. Do not defeat the safety

purpose of the polarized plug. The 3-

wire grounding type plug will fit into

a grounding type power outlet. This is

a safety feature. If you are unable to

insert the plug into the outlet, contact

your electrician to replace your

obsolete outlet. Do not defeat the

safety purpose of the grounding type

plug.

■Power-Cord Protection – Power-

supply cords should be routed so that

they are not likely to be walked on or

pinched by items placed upon or

against them, paying particular

attention to cords at plugs,

convenience receptacles, and the

point where they exit from the

product.

■Lightning – For added protection

for this product during a lightning

storm, or when it is left unattended

and unused for long periods of time,

unplug it from the wall outlet and

disconnect the antenna or cable

system. This will prevent damage to

the product due to lightning and

power-line surges.

■Overloading – Do not overload

wall outlets, extension cords, or

integral convenience receptacles as

this can result in a risk of fire or

electric shock.

■A product and

cart combination

should be moved

with care. Quick

stops, excessive

force, and uneven

surfaces may cause the product and

cart combination to overturn.

■Object and Liquid Entry – Never

push objects of any kind into this

product through openings as they

may touch dangerous voltage points

or short-out parts that could result in a

fire or electric shock. Never spill

liquid of any kind on the product.

■Servicing – Do not attempt to

service this product yourself as

opening or removing covers may

expose you to dangerous voltage or

other hazards. Refer all servicing to

qualified service personnel.

WARNING : Handling the

cord on this product or

cords associated with

accessories sold with this

product, will expose you to

lead, a chemical known to

the State of California to

cause birth defects or

other reproductive harm.

Wash hands after

handling.

■Damage Requiring Service –

Unplug this product from the wall

outlet and refer servicing to qualified

service personnel under the following

conditions:

●When the power-supply cord or

plug is damaged.

●If liquid has been spilled, or

objects have fallen into the

product.

●If the product has been exposed

to rain or water.

●If the product does not operate

normally by following the

operating instructions. Adjust

only those controls that are

covered by the operating

instructions as an improper

adjustment of other controls

may result in damage and will

often require extensive work by

a qualified technician to restore

the product to its normal

operation.

●If the product has been dropped

or damaged in any way.

●When the product exhibits a

distinct change in performance -

this indicates a need for service.

■Replacement Parts – When

replacement parts are required, be

sure the service technician has used

replacement parts specified by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may result

in fire, electric shock or other

hazards.

■Safety Check – Upon completion of

any service or repairs to this product,

ask the service technician to perform

safety checks to determine that the

product is in proper operating

condition.

■Heat – The product should be

situated away from heat sources such

as radiators, heat registers, stoves, or

other products (including amplifiers)

that produce heat.

■Wall or Ceiling Mounting - The

product should be mounted to a wall

or ceiling only as recommended by

the manufacturer.

■ When the lamp is ON, don't touch

the lamp or lamp cover.Negligence

could result in burned injury.

■ Don't use this outdoors.Negligence

could result in electric shock or fire.

CAUTION

RISK OF

ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK).

NO USER-SERVICEABLE

PARTS INSIDE.

REFER SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

The lightning flash with

arrowhead symbol, within an

equilateral triangle, is intended

to alert the user to the presence

of uninsulated "dangerous

voltage" within the product's

enclosure that may be of

sufficient magnitude to constitute

a risk of electric shock to

persons. This marking is located

at the bottom of product.

The exclamation point within

an equilateral triangle is

intended to alert the user to

the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

product.

SA 1965

SA 1966

WARNING:

TO REDUCE THE RISK

OF FIRE OR ELECTRIC

SHOCK, DO NOT

EXPOSE THIS

PRODUCT TO RAIN OR

MOISTURE.

THIS IS A CLASS A

PRODUCT.

IN A DOMESTIC

ENVIRONMENT THIS

PRODUCT MAY CAUSE

RADIO

INTERFERENCE IN

WHICH CASE THE

USER MAY BE

REQUIRED TO TAKE

ADEQUATE MEASURES.

INFORMATION

This equipment has been tested

and found to comply with the

limits for a Class A digital

device, pursuant to Part 15 of

the FCC Rules. These limits are

designed to provide reasonable

protection against harmful

interference when the equipment

is operated in a commercial

environment. This equipment

generates, uses, and can

radiate radio frequency energy

and, if not installed and used in

accordance with the instruction

manual, may cause harmful

interference to radio

communications. Operation of

this equipment in a residential

area is likely to cause harmful

interference in which case the

user will be required to correct

the interference at his own

expense.

USER-INSTALLER

CAUTION:

Your authority to operate this

FCC verified equipment could

be voided if you make changes

or modifications not expressly

approved by the party

responsible for compliance to

Part 15 of the FCC rules.

BEFORE YOU USE

■Use this product under the rated electrical conditions.

■Do not leave this product under direct sunlight or by heaters, or this

product may be discolored, deformed, or damaged.

■Do not place this product in any humid, dusty, windy or vibrating

location. Use this product in the following environmental conditions:

Temperature: 5°C~40°C (41°F~104°F)

Humidity: 30%~85% (No condensation)

■Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such

as thinner or benzine.

■Do not directly point the camera lens into the sun, or the camera may be

damaged.

■Although this product is equipped with a lamp, it is not a lighting

system.

Do not use this product primarily as a lighting unit. Such use may cause

fire or accident.

■Caring for the batteries:

• If this product is not used for a long time, take out the batteries from

the wireless remote control.

• Do not use rechargeable Ni-Cd batteries.

• Do not use new and old batteries, or batteries of different types

together.

• Do not try to recharge or short-circuit the batteries.

1. PART NAMES

AND FUNCTIONS

WIRELESS REMOTE

CONTROL

3. MOUSE

4. INSTALLATION

5. OPERATION

PROCEDURES

VARIOUS FUNCTION

AND OPERATIONS

7. OSD7. OSD

8. RS-232C

SPECIFICATIONS

9. REPLACING

THE LAMP

10.

TROUBLESHOOTING

HINTS

11. SPECIFICATIONS

CONTENTS

1. PART NAMES AND FUNCTIONS

Appearance .......................................................8

Connector Panel..................................................9

Wireless Remote Control .....................................10

2. WIRELESS REMOTE CONTROL

Receivable Range ..............................................12

Preparation ......................................................12

3. MOUSE

Mouse Operation ..............................................13

4. INSTALLATION

Installation of the Unit

............................................14

Setting of Auto Focus Operating Range...................14

Connection to Monitor and Projector ......................15

Connection to the analog RGB-out terminal .....................15

Connection to the composite video-out terminal................15

Connection to the S video-out terminal ...........................15

5. OPERATION PROCEDURES

Simple Steps for Presenting Printed Material .............16

VARIOUS FUNCTIONS AND OPERATION

Lighting ...........................................................17

Zoom..............................................................17

Digital Magnification..........................................18

Color / B&W Selection ......................................19

Posi / Nega Conversion .....................................20

Image Rotation..................................................20

Pause..............................................................21

Contrast ..........................................................21

F.A.M. (Frame Accumulate Mode)..........................22

Iris .................................................................22

Auto iris adjustment ...................................................22

Focus..............................................................23

Auto Focus ..............................................................23

Powered Manual Focus ..............................................24

Preset Operation ...............................................25

Image Memory..................................................26

"Utility Software CD-ROM" ...................................26

7. OSD (On-Screen Display)

OSD Operation.................................................27

Main Menu ......................................................28

Sub Menu ........................................................30

1. PART NAMES

AND FUNCTIONS

WIRELESS REMOTE

CONTROL

3. MOUSE

4. INSTALLATION

5. OPERATION

PROCEDURES

VARIOUS FUNCTION

AND OPERATIONS

7. OSD

9. REPLACING

THE LAMP

10.

TROUBLESHOOTING

HINTS

11. SPECIFICATIONS

CONTENTS

8. RS-232C

SPECIFICATIONS

8. RS-232C SPECIFICATIONS

Setting Up........................................................32

Cable Connection..............................................32

Connection ......................................................33

Transmission Specifications ..................................33

Data Format Specifications...................................33

Transmission command (PC →Ceiling Presenter) ..............33

Response data format (Ceiling Presenter →PC)................34

UART Communication Format................................35

9. REPLACING THE LAMP

Replacing the Lamp ............................................37

10. TROUBLESHOOTING HINTS

Symptoms and Confirmation .................................38

11. SPECIFICATIONS

General..................................................................39

Camera..................................................................40

Lighting ..................................................................40

Supplied Accessories.................................................41

Optional parts (to be purchased separately) ....................41

Appearance

Ceiling mounting screw hole

Lamp cover

Ventilation outlet

Setscrew

Halogen lamp

Infrared ray receptor

LED

Lens

1PART NAMES AND FUNCTIONS

Connector Panel

Mouse

Terminal

[MOUSE]

USB Terminal

[USB]Video-out Terminal [S-VIDEO/VIDEO]

S-Video (Mini DIN 4P)

Composite Video (RCA pin jack)

RS-232C Terminal

[RS-232C]

Analog RGB-out

Terminal [RGB OUT]

DIP Switches

Power Cord

Receptacle[AC IN]

Power Supply Switch

[POWER]

ABCD

Name Function Reference Page

P.3 2

P.1 5

P.1 3

P.2 6

P.1 4 P. 1 5

P.1 5

Mouse Terminal [MOUSE]

USB Terminal

[

USB]

Video-out Terminal

[S-VIDEO/VIDEO]

S-Video (Mini DIN 4P)

Composite Video

(RCA pin jack)

RS-232C Terminal

[

RS-232C]

Analog RGB-out

Terminal

[RGB OUT]

To connect the mouse (supplied accessory)(*1).

If connected to personal computer with

the attached USB cable, it is possible to

transfer images and control the unit by

using the software in the attached Utility

Software CD-ROM.(*1

)

To output images to the NTSC/PAL

monitor, such as TV monitor.

Image is output when this terminal is

connected to RGB input equipment

(e.g., LCD projector, multi-sync monitor).

To connect the RS-232C cable when

controlling the unit from the PC.

DIP Switches

[A] key

Over scan

Key alignment and functions:

Under scan

NTSC

PAL

[B] key [D] key[C] key

The functions can be changed as follows:

◊

[A] key: To change the video output type.

◊

[B] key: To change the screen size of video output.

◊

[C] key: Selects the operating range of AF.

◊

[D] key: Selects the operating range of AF.

Before changing the DIP Switch keys, be

sure to turn OFF the power supply to this

product.

AF range selected

(See P. 14.)

(*1) For cable extension, use a cable specified for extension that is commercially available.

Altri manuali per Ceiling Presenter HV-C1000XG

Indice

Altri manuali Elmo Presentatore digitale

Elmo

Elmo TRS-3500SX Manuale utente

Elmo

Elmo HV-100XG Manuale utente

Elmo

Elmo MG-600 Manuale utente

Elmo

Elmo TRS-3500SX Manuale utente

Elmo

Elmo TRS-35XG Manuale utente

Elmo

Elmo MX-1 Manuale utente

Elmo

Elmo PX-30E Manuale utente

Elmo

Elmo HV-8000SX Manuale utente

Elmo

Elmo DT-100AF Manuale utente

Elmo

Elmo Teacher's Choice P10 Manuale utente

Elmo

Elmo MG-600 Manuale utente

Elmo

Elmo TX-1 Manuale utente

Elmo

Elmo Teacher's Choice P10 Manuale utente

Elmo

Elmo TT-L1 Manuale utente

Elmo

Elmo EV-400AF Manuale utente

Elmo

Elmo Ceiling Presenter HV-C1000XG Manuale utente

Elmo

Elmo MX-1 Manuale utente

Elmo

Elmo LX-1 Manuale utente

Elmo

Elmo HD-80XG Manuale utente

Manuali Presentatore digitale popolari di altre marche

Edirol

Edirol RG-100 Manuale utente

Hama

Hama Como Manuale utente

Dukane

Dukane AV-P1000 Manuale utente

Canon

Canon PR3 Manuale utente

VSON

VSON N81 Manuale utente

Samsung

Samsung UF-130DX Manuale utente

Targus

Targus Multimedia Manuale utente

Edirol

Edirol PR-50 Manuale del proprietario

x-pointer

x-pointer IMAGE POINTER XPM170Y Manuale utente

Acrobak

Acrobak BLP-305 Manuale utente

Targus

Targus Mac AMP11 Manuale utente

Edirol

Edirol PR-50 Manuale utente

Samsung

Samsung SDP-850 Manuale utente

Dukane

Dukane DV-P303A Manuale utente

RemotePoint

RemotePoint Presenter Global Manuale utente

Kensington

Kensington Wireless Presenter with Laser Pointer Istruzioni operative

NEC

NEC DS1-MP10RX2 Manuale operativo

Logitech

Logitech R800 - Professional Presenter Presentation Remote... Manuale utente