Elmo Boxi MP-350 Manuale utente

■Read this guide and the separate “IMPORTANT SAFEGUARD” carefully before

using the projector.

■This guide describes the basic operation of the projector taking for example of the

connection to a computer. Refer to the instruction manual of the BOXi for any other

operations and detailed information.

Any names, company names and product names referred to in this guide are trademarks

or registered trademarks of the respective companies.

MP-350

QUICK START GUIDE

《BOXi Instruction manual》

Download the instruction manual from the following BOXi

website.

BOXi Product Website：http://boxi.elmoglobal.com/

ENGLISH

TABLE OF CONTENTS

TABLE OF CONTENTS ....................................................................................... 2

1GETTING STARTED........................................................................................... 3

Checking the package contents ........................................................................... 3

Part names and functions..................................................................................... 4

Preparing the remote control................................................................................ 5

2USING THE PROJECTOR.................................................................................. 6

Installing the projector.......................................................................................... 6

Connecting to a device......................................................................................... 7

Powering on ......................................................................................................... 8

Detecting the input signal..................................................................................... 9

Adjusting the projected image............................................................................ 10

Powering off ........................................................................................................11

1GETTING STARTED

Checking the package contents

Projector AC adapter Power cord Remote control

*Battery included

Protective cover IMPORTANT

SAFEGUARD WARRANTY CARD CD-ROM

*with Hook and loop

fastener (2pcs)

*QUICK START

GUIDE included

■Refer to the instruction manual of the BOXi for details how to use

the Protective cover.

N o t e

Part names and functions

TOP/FRONT TOP/BACK

Control

panel

RGB IN

HDMI USB

DC IN 12V

Security slot

Rear panel

Power indicator

Wireless LAN indicator Warning indicator

Power button Menu button

UP button

LEFT button RIGHT button

DOWN button

Enter button

Rear panel

Remote sensor

Focus dial

Lens

Intake vents

Speaker

Exhaust vent

Control panel

Remote control

Preparing the remote control

A battery is pre-installed in the remote control

at the time of shipment (with insulation sheet).

Remove the insulation sheet before using the

remote control for the first time.

LEFT button RIGHT button

ENTER button

Blank screen button Input selection button

Keystone + button

Keystone - button

Volume＋button

Volume－button

MUTE button

UP button

DOWN button

Menu button

Power button

Insulation sheet

2USING THE PROJECTOR

Installing the projector

Decide the position to place the projector.

The distance between the projector and the screen should be between 48cm (screen

size: 25 inch) and 133cm (screen size: 68 inch).

Screen size Projection distance

Inch Width (cm) Height (cm) L(cm)

25 53.8 33.7 48

30 64.6 40.4 58

35 75.4 48.0 68

40 86.1 53.8 78

45 96.9 60.6 88

50 107.7 67.3 98

55 118.5 74.0 108

60 129.2 80.8 118

65 140.0 87.5 128

68 146.5 91.5 133

→ Refer to the instruction manual of the BOXi for detailed information.

■The values in the table are design values and may vary. Use them

as an indication only.

■The aspect ratio of the projected image in full screen is 16:10. When

the aspect ratio of the input signal is different from 16:10 (such as

16:9 or 4:3), top and bottom or left and right of the image will not be

displayed and the screen size becomes smaller than those specified

in the above table.

N o t e

Screen size (inch)

Width

Height

Connecting to a device

1. Connect the power supply (AC adapter and power cord) to the projector.

2. Connect the projector to the device such as a computer using RGB cable.

BACK

When using HDMI, use the HDMI terminal and HDMI cable (sold separately).

RGB cable

(Sold separately)

Device (such as a computer)

AC adapter

Power cord

-Connecting using RGB terminal

Powering on

1. Press button on the projector or the remote control.

Power indicator turns green.

(Wireless LAN indicator turns on at the same time.)

The opening screen appears.

■It will take some time before you can operate the projector after the

power is on.

■Refer to the instruction manual of the BOXi for details about the

wireless LAN indicator and functions of the wireless LAN.

Remote control

Control panel

N o t e

Detecting the input signal

Wait until the projector automatically detects the input signal

AUTO function to automatically detect the input signal is enabled at the time of

shipment. When the device is connected using RGB terminal or HDMI terminal,

the input signal is detected automatically.

Selecting the input signal from the menu

1. Press button on the remote control or button on the control panel.

「Input signal selection menu」appears.

2. Select the input signal using buttons.

3. Press button to execute.

Input signal selection menu

HDMI RGB USB WiFi

HDMI

RGB

Remote control

Control panel

■Take the following steps to select the input signal manually.

■Input signal selection can only be done from the menu when

USB or WiFi is selected.

■Refer to the instruction manual of the BOXi for details about

the operation.

N o t e

Adjusting the projected image

Focusing the image

1. Use the focus dial to focus the image.

Correcting the keystone distortions

1. Press + or - of button on the remote control.

「Keystone adjustment dialog」appears.

2. Press + or - of button on the remote control.

Remote control

Press＋button

(

Press this button when the projection

angle is increasing.)

Press－button

(

Press this button when the projection

angle is decreasing.)

Keystone adjustment dialog

Remote control

Altri manuali per Boxi MP-350

Indice

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente