ELNA 9900 - LEAFLET Manuale utente

SERVICE MANUAL

9900

elna 9900

CONTENTS

Replacing the Spool Stand...........................................................................................4

Replacing the Tension Unit Cover ................................................................................4

Replacing the Static head cover (Right).......................................................................5

To Replace Right Cover and Left Cover.......................................................................6

Replacing the Base Cover and Bed Cover ..................................................................7

Checking the Thread Paths (1) ....................................................................................8

Checking the Thread Paths (2) ....................................................................................9

Replacing the Needle ................................................................................................. 10

Needle and Thread Reference Table ......................................................................... 11

Checking the Lowest Position of the Needle.............................................................. 12

Replacing the Needle Bar Rest .................................................................................. 13

Replacing the Take-up Lever Cam Roller .................................................................. 14

Adjusting the Take up Lever Timing ........................................................................... 15

Replacing and Adjusting the Presser Foot (1)............................................................ 16

Replacing and Adjusting the Presser Foot (2)............................................................ 17

Replacing the Thread Catcher Unit ............................................................................ 18

Replacing the Thread Catcher Hook .......................................................................... 19

Replacing the Jump Solenoid .................................................................................... 20

elna 9900

Adjusting a Play in the Moving Head ......................................................................... 21

Replacing the Moving Head (1).................................................................................. 22

Replacing the Moving Head (2).................................................................................. 23

Adjusting the Needle Drop Position (Back or Forth) .................................................. 24

Adjusting the Needle Height....................................................................................... 25

Replacing the Needle Bar, Needle Spring and Cushion ............................................ 26

Replacing the Rotation Stopper Plate ........................................................................ 27

Replacing the Thread Take-up Lever ......................................................................... 28

Adjusting the Check Spring Tension .......................................................................... 29

Adjusting the Check Spring Stroke ............................................................................ 30

Adjusting the Thread Catcher Holder ......................................................................... 31

Replacing the Thread Catcher Loop Tape ................................................................. 32

Replacing the Lateral Moving Unit ............................................................................. 33

Adjust the Hook Timing .............................................................................................. 34

Adjusting the Position of the Hook Stopper................................................................ 35

Replacing the Thread Cutter Driving Roller ............................................................... 36

Replacing the Dynamic Cutter Blade ......................................................................... 37

Replacing the Static Cutter Blade .............................................................................. 38

CONTENTS

elna 9900

Adjusting the Static Cutter Blade ............................................................................... 39

Adjusting the Dynamic Cutter Blade .......................................................................... 40

Adjusting the Bobbin Thread Holder .......................................................................... 41

Adjusting the Thread Keeper ..................................................................................... 42

Adjusting the X-carriage Belt Tension ........................................................................ 43

Replacing the X-carrige Belt ...................................................................................... 44

Adjusting the Y-carriage Belt Tension ......................................................................... 45

Replacing the Y-carrige Belt ....................................................................................... 46

Adjusting the Timing Belt Tnsion ................................................................................ 47

Replacing the Timing Belt .......................................................................................... 48

Adjusting the Motor Belt Tension ................................................................................ 49

Replacing the Motor Belt ............................................................................................ 50

Replacing the DC Motor ............................................................................................. 51

Adjusting the Needle Upper Shaft Timing .................................................................. 52

Adjusting the Moving Head Stop Position .................................................................. 53

Adjusting the Needlr Stop Position............................................................................. 54

Adjusting the Carriage Home Position (1) .................................................................. 55

Adjusting the Carriage Home Position (2) .................................................................. 56

Parts List .............................................................................................................. 57-100

CONTENTS

elna 9900

Replacing the Tension Unit Cover

Setscrews

Spool stand

Tension unit cover

To remove:

1. Remove the 3 setscrews and spool stand.

To attach:

2. Attach the spool stand and tighten the 3

setscrws.

Setscrews

Replacing the Spool Stand

To remove:

1. Remove the 2 setscrews and tension unit cover.

To attach:

2. Attach the tension unit cover and tighten the 2

setscrws.

elna 9900

To remove:

1. Loosen the RCS mounting arm knob and

remove it.

2. Remove 2 caps, and 2 setscrews (A). Remove

the static head cover (right).

3. Disconnect the LED lamp connector and

K-board connector.

To attach:

4. Connect the LED lamp connector and K-board

connector.

5. Attach the static head cover (right) with the 2

setscrews (A) while pulling the cover to the

back of the machine. Attach the 2 caps.

6. Attach the RCS mounting arm knob.

Replacing the Static Head Cover (Right)

RCS mounting arm knob

Caps, Setscrews (A)

Hooks

LED lamp connector

K-board connector

elna 9900

Hook

Upper hook 1

Static head cover (right)

Right Cover

To remove:

1. Remove the static head cover (right).

Unhook the right cover from the right hook.

• To remove the static head cover (right), Unhook

the cover from upper hook 1, upper hook 2 and

the hook on handwheel side.

2. Remove 3 caps and 3 setscrews A.

Remove the right cover while pulling the right

bottom part toward you and lift.

To attach:

3. Attach the right cover with 3 setscrews A and 3 caps.

4. Attach the static head cover (right).

• Do not get cords caught when attaching the

static head cover (right).

Left Cover

To remove:

1. Remove 4 caps and 4 setscrews B.

Remove the left cover.

Disconnect the connectors.

To attach:

2. Connect the connectors.

Attach the left cover with 4 setscrews B and 4

caps.

Caps, Setscrews A

Caps, Setscrews B

To Replace Right Cover and Left Cover

Upper hook 2

elna 9900

Base Cover

To remove:

1. Remove the 6 setscrews A.

2. Lift the back of the machine and pull out

the base cover (support the back of the machine

with a crosstie).

To attach:

3. Attach the machine into the base cover.

4. Tighten the 6 setscrews A securely.

Replacing the Base Cover and Bed Cover

Bed Cover

To remove:

1. Remove the setscrews A. Remove the bed

cover.

To attach:

2. Attach the bed cover with the setscrews A.

Setscrews A

Base cover

Bed cover

elna 9900

Detectig roller

To avoid seam puckering, skipped stitches or

thread breaking, keep the thread paths in the best

condition (free from burr, scratch, rust etc.).

1. Tension control, detecting roller

a) Detecting rollers should spin smoothly.

b) Tension controls and detecting rollers

should be free of lint or dust.

2. Thread guide hole

a) There should be no burrs or scratches.

3. Thread take-up lever

a) There should be no burrs or scratches.

4. Lower guide plate

a) There should be no burrs or scratches.

5. Needle

a) The needle should not be bent or blunt.

To check the needle:

Place and slide the tip of the needle on your

nail to check if there is any nick or chip.

Replace the needle if it marks a scratch on your

nail.

Place the needle onto something flat (needle

plate, glass, etc.). The gap (A) between the

needle and the flat surface should be consis-

tent.

Replace the needle if the gap is not consistent.

Checking the Thread Paths (1)

elna 9900

6. Needle plate

a) There should be no burrs or scratches.

7. Presser foot

a) There should be no burrs or scratches,

especially inside of the presser foot hole.

b) There should be no warp in the presser foot.

8. Hook race

a) There should be no burrs or scratches.

b) The tip of hook race should not be blunt.

c) There should be no detectable play in the

hook and hook race.

9. Thread keeper

a) There should be no burrs or scratches,

especially on the tip of the thread keeper.

10. Check spring

a) The check spring should not be worn.

Checking the Thread Paths (2)

Upper side

Lower side

Hook

Thread keeper

Presser foot

Check spring

Altri manuali per 9900 - LEAFLET

Indice

Manuali Macchina da cucire popolari di altre marche

Riccar

Riccar RL634DE Manuale utente

Singer

Singer 2517 Manuale utente

Pfaff

Pfaff 3307-1 SERIES Manuale utente

Janome

Janome Quilt Maker Pro 18 VERSA Manuale utente

Siruba

Siruba C007JP Manuale utente

Husqvarna Viking

Husqvarna Viking Designer SE Manuale utente

Singer

Singer 148-5 Manuale utente

IKEA

IKEA SY Manuale utente

Pfaff

Pfaff 571 Manuale utente

Singer

Singer 15-91 Manuale utente

Brother

Brother BB370 Manuale utente

Pegasus

Pegasus WT100 Series Manuale utente

Reliable

Reliable 7100DB Manuale utente

Pfaff

Pfaff 937 Manuale utente

Singer

Singer 6038 Manuale utente

Singer

Singer 413K Manuale utente

Pfaff

Pfaff 1471 E1 Manuale utente

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuale utente