ELTEX WOP-12ac Manuale utente
IP address:192.168.1.10
Username:admin
Password:password
Wireless access point
WOP-12ac
User manual
Firmware version1.18.1
WOP-12ac. User manual
2
Contents
1 Introduction ............................................................................................................................................ 3
1.1 Annotation...........................................................................................................................................3
1.2 Symbols...............................................................................................................................................3
2 Device description ................................................................................................................................. 4
2.1 Purpose ...............................................................................................................................................4
2.2 Device specification............................................................................................................................4
2.3 The device technical parameters.......................................................................................................5
2.4 Design..................................................................................................................................................7
2.5 The device schematic structure.........................................................................................................9
2.6 Reset to the default settings ..............................................................................................................9
2.7 Delivery package...............................................................................................................................10
3 Installation order.................................................................................................................................. 11
3.1 Safety rules........................................................................................................................................11
3.2 Installation recommendations .........................................................................................................11
3.3 Calculating the number of required access points.........................................................................11
3.4 Channel selection for neighboring access points...........................................................................12
3.5 The device installation......................................................................................................................13
3.5.1 Procedure of attaching brackets to the device........................................................................... 13
3.5.2 Algorithm of device mounting to a mast/pole............................................................................ 15
3.5.3 Order for wall-mounting brackets ................................................................................................ 16
3.5.4 Grounding scheme of the device ................................................................................................. 18
4 Application. Power connector pin array ............................................................................................. 19
5 List of changes..................................................................................................................................... 20
WOP-12ac. User manual
3
1 Introduction
1.1 Annotation
Modern tendencies of telecommunication development necessitate operators to search for the most optimal
technologies, allowing you to satisfy drastically growing needs of subscribers, maintaining at the same time
consistency of business processes, development flexibility and reduction of costs of various services provision.
Wireless technologies are spinning up more and more and have paced a huge way for short time from unstable
low-speed communication networks of low radius to broadband networks equitable to speed of wired networks
with high criteria to the quality of provided services.
WOP-12ac device is a Wi-Fi access point of Enterprise class. The device enclosed into hermetic case which allows
to use the access point outdoor in different climatic conditions – at temperatures from –40 to +65 °С.
This manual specifies intended purpose, main technical parameters, design, installation procedure, safe operation
rules and installation recommendations forWOP-12ac.
1.2 Symbols
Notes and warnings
Notes contain important information, tips or recommendations on device operation and setup.
Warnings are used to inform the user about harmful situations for the device and the user alike, which
could cause malfunction or data loss.
WOP-12ac. User manual
4
2 Device description
2.1 Purpose
WOP-12ac wireless access point (hereinafter the device) is designed for provision of users' access to high-speed
safe network.
The device provides high-speed and safe wireless network combining a lot of opportunities and services that are
necessary for comfortable users' access to operator services. WOP-12ac provides connection of up to 70 users.
The device is used to organize wireless network for different climate conditions in the wide range of operation
temperature and high humidity (parks, factories, stadium, etc.) and it is the perfect platform for organization of
connection in cottage settlements and remote communities.
Power supply of the access point is realized by PoE+ technology. Also, alternate supply is available (48 V).
2.2 Device specification
Interfaces:
•2 Ethernet 10/100/1000 Base-T (RJ-45) ports where 1 port for PoE+ power supply;
•1 port of 100/1000Base-X (optionally);
•Console (RS-232);
•6 N-type (female) connectors for external antennas (nondirectional, sectoral and narrow-band antennas).
Access point model selection depends on its use. It is required to select narrow-band antennas for long-
range wireless bridges, and sectoral or nondirectional antennas are used for base stations.
Functions:
WLAN capabilities:
•support for IEEE 802.11a/b/g/n/ac standards;
•2 independent radio interfaces;
•operation in two frequency ranges simultaneously (2.4 GHz and 5 GHz);
•support for MIMO 3x3 on each radio interface;
•WMM-based traffic prioritization;
•third-party access point detection;
•dynamic frequency selection (DFS);
•support for hidden SSID;
•32 virtual access point;
•APSD;
•power control of transmitted signal;
•WDS;
•MESH;
•support for Work Group Bridge.
WOP-12ac. User manual
5
Network functions:
•autonegotiation of speed, duplex mode and switching between MDI and MDI-X modes;
•support for VLAN;
•authentication support 802.1X;
•support for 802.11r;
•DHCP client;
•support for IPv6;
•LLDP;
•ACL;
Cluster operation mode:
•organizing a cluster with capacity of up to 64 access points;
•auto synchronization of access point configurations in a cluster;
• Single Management IP – united address to control access points in a cluster;
•autodistribution of frequency channels among access points;
•autodistribution of output power level among access points.
QoS functions
•priority and profile-based packet scheduling;
•bandwidth limiting for each SSID;
•changing WMM parameters for each radio interface;
•support prioritization by CoS and DSCP;
•the opportunity to set priority on the base of IP, Ethertype, TCP/UDP port etc.
Security
•e-mail notifying on system events;
•centralized authorization via RADIUS server (WPA Enterprise);
•WPA/WPA2 data encryption;
•Captive Portal;
•support for Internet Protocol Security (IPSec);
•support for WIDS/WIPS.
2.3 The device technical parameters
Table 1 – The device main technical parameters
WAN interface parameters
Number of ports 2 (3 for WOP-12ac-LR ER SFP and WOP-12ac-LR ER GPON)
Connector SFP1, RJ-45, 10/100/1000, auto-negotiation, BASE-T
Wireless interface parameters
Standards 802.11a/b/g/n/ac
Frequency range 2412–2472 MHz, 5150–5850 MHz
Modulation CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM
Operating channels • 802.11b/g/n: 1–13 (2412–2472 MHz)
• 802.11a/ac: 36–64 (5180–5320 MHz)
• 100–144 (5500–5720 MHz)
• 149–165 (5745–5825 MHz)
WOP-12ac. User manual
6
Speed of data transmission 6, 9, 12 , 18, 24, 36, 48, 54, MCS0-MCS23, MCS0-9 NSS1, MCS0-9
NSS2
802.11 n:
•up to 216.7 Mbps (20 MHz channel),
•up to 450 Mbps (40 MHz channel)
802.11 ac:
up to 1300 Mbps (80 MHz)
Maximum output power of the transmitter 26 dBm is a
maximum value of EIRP for WOP-12ac ER, WOP-12ac
ER SFP and WOP-12ac ER GPON in both frequency
ranges
•4 GHz up to 19 dBm
•5 GHz up to 19 dBm
Receiver sensitivity •4 GHz up to -98 дБм
•5 GHz up to -94 dBm
Security •Centralized authorization via RADIUS server (WPA
Enterprise);
•WPA/WPA2 data encryption
•Support for Captive Portal
•E-mail notifying on system events;
Selection of antenna model depends on access point usage
Support for 3x3 MIMO
2 integrated WLAN controllers Broadcom BCM43460
Console interface parameters
Type RS-232
Data rate 115200 baud
Data format 8 bits
w/o parity, 1 stop, w/o stream control
Control
Remote control Web interface, Telnet, SSH, SNMP, EMS management system.
Firmware updating and configuring by DHCP Autoprovisioning
Access restriction By password, by IP address
General parameters
Processor Broadcom BCM53016/BCM58522
NAND 128 MB NAND Flash
RAM 256 MB RAM DDR3
Power supply •PoE+ 48В/54В(IEEE 802.3at-2009)
•DC 48В
Power adapter has a protection function against power line
surges by using flattening filters
IP protection class IP-65
WOP-12ac. User manual
7
Electromagnetic compatibility CE
Power consumption no more than 20 W
Operating temperatures from -40 to +65°С
Relative humidity at 25°Сfrom 5% to 90%, non-condensing
Dimensions 246x216x97 mm
Weight 2.3 kg
2.4 Design
WOP-12ac has an industrial design and metal case. Figure 1shows the device side panel layout.
Figure1 – WOP-12ac side panel layout
Connectors and controls located on the device panels are listed inTable 2.4.
Table 2 – Description of ports and controls
WOP-12ac. User manual
8
Panel element Description
A1-A3 Radio 1 interface connectors for connection of 2.4 GHz external antennas
A4-A6 Radio 2 interface connectors for connection of 5 GHz external antennas
1 Connector for power supply
2 Port 0 (PoE) 10/100/1000 Base-T port (RJ-45 with PoE+ support
3 Port 1 10/100/1000 Base-T port (RJ-45 connector)
4 SFP Optical connector SC/UPC (only for WOP-12ac ER SFP) or SC/APC (only for WOP-12ac ER
GPON)
5 Console Connector for console cable connection (RJ-45 connector)
6 Ground
7 F Functional button closed by hermetical screw
WOP-12ac. User manual
9
2.5 The device schematic structure
Figure 2shows WOP-12ac schematic structure.
Figure 2 – WOP-12ac schematic structure
•A1-A6– connectors for antennas;
•Radio 1– radio interface that performs reception and transmission of data in wireless networks in the range
of 2.4 GHz;
•Radio 2– radio interface that performs reception and transmission of data in wireless networks in the range
of 5 GHz;
•CPU– controller performing the device control, monitoring and data transmission via wired network;
•Power Supply Unit– power supply unit of the device;
•Port 0 (PoE)– Gigabit Ethernet connector with PoE technology allows you to supply access point and to
provide access speed of up to 1Gbps;
•Port 1– Gigabit Ethernet connector provides speed access of up to 1 Gbps;
•Console– RJ-45 connector for console cable connection;
•PowerConnector– connector for power supply connection when PoE is not available.
2.6 Reset to the default settings
In order to reset the device to factory settings, press and hold the 'F' button within 15 seconds when the device in
loaded state. Device will be rebooted automatically. DHCP client will be launched by default. If the address is not
received via DHCP the device will have IP address —192.168.1.10,subnet mask —255.255.255.0and User Name/
Password to access via Web interface: admin/password.
WOP-12ac. User manual
10
2.7 Delivery package
The delivery package includes:
•WOP-12ac wireless access point;
•3 connectors for RJ-45;
•1 connector for power supply;
•Grounding kit;
•Mounting kit;
•Operating manual (supplied on a CD);
•Conformity certificate;
• Technical passport.
Altri manuali per WOP-12ac
2
Indice
Altri manuali ELTEX Punto di accesso wireless
ELTEX
ELTEX WEP-2ac-Z Manuale utente
ELTEX
ELTEX WEP-12ac Manuale utente
ELTEX
ELTEX WEP-2ac Smart Manuale utente
ELTEX
ELTEX WB-2P-LR5 Manuale utente
ELTEX
ELTEX WEP-200L Manuale utente
ELTEX
ELTEX WEP-30L Manuale utente
ELTEX
ELTEX WB-2P-LR2 Manuale utente
ELTEX
ELTEX WOP-2ac Guida all'installazione
ELTEX
ELTEX WOP-12ac-LR Manuale utente
ELTEX
ELTEX WOP-20L Manuale utente
ELTEX
ELTEX WEP-2ac Smart Manuale utente
ELTEX
ELTEX WOP-12ac Manuale utente
ELTEX
ELTEX WEP-3ax Manuale utente
ELTEX
ELTEX WOP-12ac Manuale utente
ELTEX
ELTEX WB-15-W Manuale utente
ELTEX
ELTEX WOP-12ac-LR Manuale utente
ELTEX
ELTEX WEP-1L Manuale utente
ELTEX
ELTEX WOP-2ac Manuale utente
ELTEX
ELTEX WEP-2L Manuale utente
ELTEX
ELTEX WEP-2ac Smart Manuale utente
