Embest SBC8600B Guida utente

SBC8600B

Quick Operation Guide

Embest Technology

www.embedinfo.com

Embest Technology

Table of Contents

Product Overview ..............................................................................................................1

1. Packing List .......................................................................................................1

2. DVD-ROM Contents..........................................................................................1

3. Factory Default Conditions................................................................................1

Preparations.......................................................................................................................2

1. Setting Up HyperTerminal .................................................................................2

2. Hardware Connects...........................................................................................6

Linux Operating System ...................................................................................................7

1. Updating TF Card and Booting from It..............................................................7

2. Updating NAND Flash and Booting from It .......................................................8

WinCE Operating System ...............................................................................................10

1. Updating TF Card and Booting from It............................................................10

2. Updating NAND Flash and Booting from It .....................................................13

Technical Support and Warranty....................................................................................15

Embest Technology

Product Overview

1. Packing List

SBC8600B×1

Serial Cable (DB9-DB9)×1

12V Power Adapter×1

Cross-Over Network Cable×1

DVD-ROM×1

4.3-inch LCD or 7-inch LCD×1 (Optional)

2. DVD-ROM Contents

SBC8600B Quick Guide

SBC8600B User Manual

SBC8600B Starterware User Manual

SBC8600B Schematic and Chip Datasheets

SBC8600B Software Kits (Linux/Windows Embedded Compact

7/Android/Starterware)

3. Factory Default Conditions

ALinux system is already programmed in the on-board NAND flash and supports

4.3-inch LCD by default; If another display mode is required, please refer to the

Display Mode Configurations in user manual.

SBC8600B has no CR1220 battery installed on board; Please purchase it if

necessary.

SBC8600B Single Board Computer preferably boots from NAND Flash by default,

if you want to boot from TF Card, you need to short the jumper JP5 on the board.

Embest Technology

Preparations

1. Setting Up HyperTerminal

1）Click Start > Programs > Accessories > Communications > HyperTerminal

on your PC’s desktop;

Figure 1 Start HyperTerminal

Embest Technology

2）Enter a name in the Name field and select an icon below, and then click OK;

Figure 2 Enter a Name

3）Select the port to be used and click OK;

Figure 3 Select Port

Embest Technology

4）Please configure the port you selected as shown in the following window, and

then click OK;

Figure 4 Configure Port

Embest Technology

5）HyperTerminal has been set up successfully.

Figure 5 HyperTerminal Window

Embest Technology

2. Hardware Connects

Figure 6 Hardware Connections

Table 1 Connection Details

No.

Descriptions

No.

Descriptions

Connect a LCD

If you want to boot from TF

card, short the jumper JP5

Connect a Serial Cable

Connect a Power Adapter

JP5

Embest Technology

Linux Operating System

1. Updating TF Card and Booting from It

1）You can download HP USB Disk Storage Format Tool 2.0.6 from here, and use it to

format TF card; the figure shown below is the tool’s interface;

Figure 7 Format TF Card

Select FAT32 in the File system drop-down menu, and then click Start to format

TF card.

Note:

It is not recommended to use other versions of HP USB Disk Storage Format Tool.

HP USB Disk Storage Format Tool will erase the partitions of TF card.

Embest Technology

2）Copy all the files under \linux\image\ of the DVD-ROM to the TF card, and then

insert it on SBC8600B;

3）Short the jumper JP5 and power on the system, the system boots up

successfully when the following information appears in the HyperTerminal

window; Enter root to log in Linux system;

Table 2 Log in Linux

SBC8600 login: (enter“root”to log in)

4）U-boot configuration

The system image has a default setting for 4.3-inch LCD. You can change the

settings in UBOOT according to the detailed instructions contained in 3.10

Display Mode Configurations.

2. Updating NAND Flash and Booting from It

Updating image files in NAND Flash requires the help of u-boot. No matter whether there

is data in NAND Flash, image files can be updated by running u-boot from TF card.

1）Use HP USB Disk Storage Format Tool 2.0.6 to format a TF card to FAT or

FAT32 filesystem;

2）Copy the files MLO, u-boot.img, zImage, embest-SBC-SBC8600.dtb and

rootfs.tar.xz from \linux\image in the DVD-ROM to the TF card;

3）Insert the TF card on SBC8600B and short the jumper JP5

4）Power the board on;

5）When the LEDs on the board blink quickly, the update is in progress.

6）When the LEDs on the board blink as heart frequency and buzzer alarmed, the

Altri manuali per SBC8600B

Indice

Altri manuali Embest Computer a scheda singola

Embest

Embest SBC8118 Manuale del proprietario

Embest

Embest SBC6845 Manuale utente

Embest

Embest SOM-PH8800 Manuale utente

Embest

Embest SBC8600B Manuale utente

Embest

Embest SBC6045 Manuale utente

Embest

Embest SBC8140 Manuale utente

Embest

Embest SBC6845 Manuale utente

Embest

Embest MarS Board Manuale utente

Embest

Embest SBC8140 Manuale utente

Manuali Computer a scheda singola popolari di altre marche

WIN Enterprises

WIN Enterprises PL-80910 Manuale utente

AXIOMTEK

AXIOMTEK SBC81206 Series Manuale utente

SeaLevel

SeaLevel SBC-R9 Manuale utente

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuale utente

WinSystems

WinSystems PPM-LX800-G Manuale utente

GIGAIPC

GIGAIPC QBiX-PPC Series Manuale utente

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuale utente

Commell

Commell FS-978 Manuale utente

GIGAIPC

GIGAIPC QBiP-8665A/ Manuale utente

VersaLogic

VersaLogic Python EBX-11 Manuale utente

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuale utente

CompuLab

CompuLab SB-A510 Manuale utente

Boser

Boser HS-7321 Manuale utente

Premier Farnell

Premier Farnell Embest SBC8530 Manuale utente

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuale utente

Aaeon

Aaeon UP Manuale utente

Portwell

Portwell WUX Series Manuale utente

Lanner electronics

Lanner electronics IAC-F847 Series Manuale utente