Emerson Bettis RP4AF Manuale utente

Bettis RTS Relay Board (RP4AF)

Electric Actuator

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

August 2023

Notes

August 2023

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

This page intentionally left blank.

Table of Contents

August 2023

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

Table of Contents i

Table of Contents

Section 1: Tools

Tools.......................................................................................................................................1

Section 2: Material

Material.................................................................................................................................2

Section 3: Installation

Installation............................................................................................................................3

Section 4: Programming

Programming.......................................................................................................................7

Notes

August 2023

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

This page intentionally left blank.

August 2023

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

Tools

Section 1: Tools

Section 1:Tools

! WARNING

Remove all power supplies before doing the exchange. Act always with caution

during the exchange!

• Needle nose pliers

• Screw driver phillips

• Screw driver at

• Allen key 5

• Socket wrench 5

Figure 1.

August 2023

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

Material

Section 2: Material

Section 2:Material

• 1x relay board RP4AF (ID:15772)

• 2x steel screw M3x16 (ID:952)

• 3x plastic distance 8 mm (ID:9896)

• 1x plastic screw M3x15 (ID:9895)

• 1x plastic nut M3 (ID:7084)

• 2x lock plates M3 red (ID:13674)

Figure 2.

Figure 3.

August 2023

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

Installation

Section 3: Installation

Section 3:Installation

1. Unscrew the 4 hexagon socket screws from the cover and remove it carefully.

Mind the connection cable between display and logic board.

Figure 4.

2. Unscrew the 4 cross recessed screws from the existing logic board and afterwards

tilt it carefully to you.

Figure 5.

August 2023

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

Installation

Section 3: Installation

3. Remove the cable with the 10-pole connector and connect it with the

relay board.

Figure 6.

4. Insert plastic screw M3x15 in provided hole and add plastic distance on it,

after connect the relay board with the logic board on suitable connector.

Add plastic nut on plastic screw to x the board.

Figure 7.

August 2023

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

Installation

Section 3: Installation

5. Put two plastic distances 8 mm between logic and relay board, insert the

M3x16 steel screws through the estimated holes in logic board, plastic

distances and relay board and secure the screws with the red lock plates.

Figure 8.

6. Install die logic + relay board back to the control (two small screws for

original installation will remain). Take care of possible damage of cables or

other parts.

Figure 9.

August 2023

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 1

Installation

Section 3: Installation

7. Connect cable between display cover and logic board. Perform a Firmware

update now, before installing display cover on the unit. This update is

important for the following programming steps (use FW version display 1507,

logic 219 or higher). For a detailed description on how to perform a rmware

update, please refer to separate manual.

During display cover installation, pay attention to the O-ring which must

sit correctly between cover and housing and x it with the 4 hexagon

socket screws.

Figure 10.

Altri manuali per Bettis RP4AF

Indice

Altri manuali Emerson Controllori

Emerson

Emerson Asco SentronicPLUS Manuale utente

Emerson

Emerson Powerdrive F300 Manuale utente

Emerson

Emerson Y696 Manuale utente

Emerson

Emerson HSR Istruzioni per il montaggio

Emerson

Emerson Bettis XTE3000 Manuale utente

Emerson

Emerson Fisher FIELDVUE DVC6000 Manuale utente

Emerson

Emerson AVENTICS Sentronic TWIN 615 Manuale utente

Emerson

Emerson Fisher 95L Manuale utente

Emerson

Emerson Unidrive M400 Manuale utente

Emerson

Emerson F-Series Manuale utente

Emerson

Emerson EC3-X33 Manuale utente

Emerson

Emerson Fisher easy-Drive 200L Manuale utente

Emerson

Emerson Dixell Wing XW570K Schema elettrico

Emerson

Emerson Fisher 64 Series Manuale utente

Emerson

Emerson Site Supervisor Manuale utente

Emerson

Emerson Bettis RGS Q-Series Manuale utente

Emerson

Emerson Bettis XTE3000 Manuale utente

Emerson

Emerson Bettis G01 Series Manuale utente

Emerson

Emerson Fisher CT88 Manuale utente

Emerson

Emerson Fisher Y692 Manuale utente

Emerson

Emerson Fisher Type 667 size 80 Manuale

Emerson

Emerson EC20 Series Manuale utente

Emerson

Emerson Fisher HSRL Series Manuale utente

Emerson

Emerson Level-Trol 2500 Series Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente

3M MicroTouch EX113 Manuale utente