Emerson COPELAND XC PRO Manuale del proprietario

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 1/6

Date of last update: Feb-23

Ref: TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00

Application Engineering Europe

XC PRO CONTROLLER – BIOS UPDATE

QUICK USER’S MANUAL

1. Connect laptop to controller:

a. Identify the IP address of the controller.

i. Go to the "Service" menu on the Visotouch display connected to the controller (yellow

wrench icon) →Scroll down to "Conf IP & MDB Management" →The IP address is shown

in this menu.

ii. The default IP address of the controller is 192.168.0.250.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 2/6

b. Connect the laptop to the controller with a crossover cable.

c. The laptop can only communicate with the controller if they are in the same network.

i. Disconnect the laptop from your company data network.

ii. In the Windows environment go to "Network & Internet Settings", then "Change adapter

options".

iii. Select "Ethernet" and "Properties".

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 3/6

iv. Click on "Internet Protocol Version 4 (TCP/IPv4)" and "Properties".

v. In "Properties" set the IP parameters according to the IP address of the controller.

vi. Click on "OK" to confirm.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 4/6

d. Open the webpage of the controller.

i. Go to the browser.

ii. Enter the IP address of the controller.

iii. Enter username "admin" and password "Dixell" to login.

e. Open "Info" page on the left.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 5/6

2. Load empty application:

a. Prepare USB stick with following folders and correct isadix file in folder "app". Contact the Emerson

Application Engineering department for the correct isadix file.

b. Connect USB stick to the controller.

c. Session will become invalid (after a few minutes).

d. Reload the page.

e. Application release shows "Restore isadix (Validating)".

f. When the message “(Validating)” disappears (reloading of the page might be necessary), remove

the USB stick.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 6/6

3. Load new BIOS:

a. Prepare USB stick with following folders and correct zupdater file in folder "bios" and correct isadix

file in folder "app". Contact the Emerson Application Engineering department for the correct zupdater

and isadix files.

b. Connect USB stick to the controller.

c. Session will become invalid (after a few minutes).

d. Reload the page.

e. BIOS and application release show "(Validating)".

f. When the message "(Validating)" disappears (reloading of the page might be necessary), remove

the USB stick.

g. Update is successful if the correct number is shown in row "BIOS Release" without "(Validating)".

DISCLAIMER

1. The contents of this publication are presented for informational purposes only and are not to be construed as warranties or

guarantees, express or implied, regarding the products or services described herein or their use or applicability.

2. Emerson Climate Technologies GmbH and/or its affiliates (collectively "Emerson"), as applicable, reserve the right to modify

the design or specifications of such products at any time without notice.

3. Emerson does not assume responsibility for the selection, use or maintenance of any product.Responsibility for proper

selection, use and maintenance of any Emerson product remains solely with the purchaser or end user.

4. Emerson does not assume responsibility for possible typographic errors contained in this publication.

Indice

Altri manuali Emerson Controllori

Emerson

Emerson Vilter MicroVission Manuale operativo

Emerson

Emerson Dixell XR70CX Schema elettrico

Emerson

Emerson EXD-TEVI Manuale utente

Emerson

Emerson Dixell XR30CX-4S1C1 Schema elettrico

Emerson

Emerson Fisher 627 Manuale utente

Emerson

Emerson Bettis RPE Series Manuale utente

Emerson

Emerson Fisher LR125 Series Manuale utente

Emerson

Emerson E2 Manuale utente

Emerson

Emerson Fisher L2 Manuale utente

Emerson

Emerson White-Rodgers 11B79-3 Manuale utente

Emerson

Emerson Fisher FIELDVUE DVC5000 Guida alla configurazione

Emerson

Emerson FloBoss 107 Manuale utente

Emerson

Emerson Double-Acting Series Istruzioni per l'installazione

Emerson

Emerson FISHER 657NS Manuale utente

Emerson

Emerson Liebert PEX+ Series Manuale utente

Emerson

Emerson Fisher 67C Series Manuale utente

Emerson

Emerson EC2-712 Manuale utente

Emerson

Emerson Dixell IEV12D Schema elettrico

Emerson

Emerson EL-O-Matic F-Series Guida utente

Emerson

Emerson Tescom 26-1000 Series Manuale utente

Emerson

Emerson Bettis RTS FL Series Manuale utente

Emerson

Emerson EC3-X33 Manuale utente

Emerson

Emerson HSR Istruzioni per il montaggio

Emerson

Emerson Dixell XR06CH BMB Schema elettrico

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente

3M MicroTouch EX113 Manuale utente