6
Reference Manual
00809-0100-4423, Rev AB
Smart Wireless Navigator
May 2014
Smart Wireless Navigator
Table 1-1. User accounts and passwords
To protect the Navigator information and programs when not in use, or to switch
users, click the “log out” button in the Title Bar.
1.4.2 AMS™Wireless Configurator or AMS Device Manager
Launching the design sub-menu and selecting the Device Design button with open
AMS Wireless Configurator or AMS Device Manager, depending on your Navigator
type. A prompt will ask for the username and password associated with this AMS
account. AMS Wireless Configurator has a default username/password of admin/[no password].
When commissioning the AMS Wireless Configurator within the Navigator, it is strongly
recommended, for security purposes, to change the password. Follow best practices and
site/corporate IT policies to create a strong, non-default password. The username and password
of AMS Device Manager will match the username/password of the main AMS system.
1.4.3 Server Plus Connect for AMS Device Manager
To connect to a different Server Plus Station, the Client SC Station must first be added
to the Station Configuration of the Server Plus Station (see Related Topics for more
information). If this requirement is not met, an error (This PC is not licensed for
Client-Server operation) displays on the Client SC Station when AMS Device Manager is started.
To connect to a different Server Plus Station if AMS Device Manager is closed on the Client SC
Station:
1. In Network Configuration on the Client SC Station, remove all configured system
interfaces (other than HART®Modem).
2. Select Start | All Programs | AMS Device Manager | Server Plus Connect.
3. Select the desired Server Plus Station PC from the Server Plus Station drop-down list or
enter the PC name in the box and click Connect.
4. Click Yes to launch AMS Device Manager after making the connection; No to connect
without launching AMS Device Manager; or Cancel to keep the existing connection.
5. After the connection is made, click Close.
To connect to a different Server Plus Station if AMS Device Manager is running on the Client SC
Station:
1. If no system interfaces (other than HART Modem) are configured on the Client SC
Station, select Tools | Server Plus Connect.
2. Select the desired Server Plus Station PC from the Server Plus Station drop-down list or
enter the PC name in the box and click Connect.
3. Click Yes to launch AMS Device Manager after making the connection, No to connect
without launching AMS Device Manager, or Cancel to keep the existing connection.
4. After the connection is made, click Close.
After the Server Plus connection has been established, you can view the entire network
configuration of the Server Plus in the Device Explorer view on the Client SC.
Default username Default password Account type Restrictions
Supervisor Admin Administrative None, Full Access
User 1 Password1 General User Add new Gateways, Settings
(General, Application,
Maintenance)
User 2 Password2 General User
User 3 Password3 General User
