Emerson Rosemount 702 Manuale utente
Quick Start Guide
00825-0400-4702, Rev GE
April 2018
Rosemount™ 702 Wireless Discrete
Transmitter
About this guide
This manual supplement provides information on installing, operating, and maintaining the
Rosemount 702 Wireless Discrete Transmitter for plunger arrival detection. The table below lists
the variants of the Rosemount 702 transmitter; refer to the table if looking for documentation on
variants. Refer to the Rosemount 702 Reference Manual for more instruction. This guide and the
manual are available electronically on Emerson.com/Rosemount
Model
number Functionality Manual
702DX22
/32/42 Two channel discrete I/O Rosemount 702 Wireless Discrete Transmitter Refer‐
ence Manual
702DX61 One channel for Tyco TraceTek
liquid hydrocarbon leak detec-
tion
Rosemount 702 Wireless Discrete Transmitter Refer‐
ence Manual
702DX52 Discrete Transmitter for Plung-
er Arrival Detection Rosemount 702 Wireless Desicrete Transmitter
Reference Manual Supplement
Product description
The Roseount 702 for plunger arrival detection is designe dto work with the ETC Cyclops plunger
arrival sensor (ET-11000). The transmitter provides power to the plunger arrival sensor, reads and
communication the sensor state via wirelessHART. Features of the Rosemount 702 Transmitter
include:
•Simple and easy installations proctices currently being used for robust installations
•Flexibility to meet your most demanding applications
•Sensor state latching for host system compatibility
•Provides poiwer to external plunger arrival sensor
•The integral LCD display conveniently displays the latched plunger sensor state,
power output state, and diagnostics of the transmitter
Quick Start Guide April 2018
2Rosemount 702 Wireless Discrete Transmitter
Rosemount 702 Transmitter for Plunger ArrivalFigure A-:
A Plunger Arrival Sensor (ETC Cyclops) G Lower Lubricator Outlet
B 702 Plunger Arrival H Well Casing
C Lubricator I Production gas
D Plunger J Well casing/production tube
E Wastewater K Well casing
F Upper Lubricator Outlet
Contents
Wireless considerations ................................ 4
Physical installation ...................................... 7
Device network configuration .....................14
Verify operation ..........................................16
Reference information: wiring switch inputs,
output circuits, and leak sensors .................20
Safety shower and eye wash
monitoring ................................................. 39
Product Certifications ................................. 42
Quick Start Guide April 2018
3Rosemount 702 Wireless Discrete Transmitter
1 Wireless considerations
1.1 Power up sequence
The Smart Wireless Gateway should be installed and functioning properly
before any wireless field devices are powered. Install the Black Power Module,
SmartPower™ Solutions model number 701PBKKF (part number
00753-9220-0001) into the Rosemount 702 Transmitter to power the
device. Wireless devices should be powered up in order of proximity from the
Gateway, beginning with the closest device, then working outward from the
Gateway. This results in a simpler and faster network installation. Enable
Active Advertising on the Gateway to ensure new devices are able to join the
network faster. For more information see the Emerson™ Wireless 1420
Gateway Reference Manual.
1.2 Antenna position
The antenna should be positioned vertically, either straight up or straight
down, and it should be approximately 3 ft. (1 m) from any large structure,
building, or conductive surface to allow for clear communication to other
devices.
Antenna PositionFigure 1-1:
Quick Start Guide April 2018
4Rosemount 702 Wireless Discrete Transmitter
1.3 Conduit entry
Upon installation, ensure each conduit entry is either sealed with a conduit
plug using approved thread sealant, or has an installed conduit fitting or
cable gland with appropriate threaded sealant. Note the conduit entries on
the Rosemount 702 Transmitter are threaded ½–14 NPT.
Conduit EntryFigure 1-2:
$$
A. Conduit entry
1.4 Field Communicator connections
The power module needs to be installed before the Field Communicator can
interface with the Rosemount 702 Transmitter. This transmitter uses the
Black Power Module; Order model number 701PBKKF or part number
00753-9220-0001.
April 2018 Quick Start Guide
Quick Start Guide 5
Connection DiagramFigure 1-3:
COMM
P/N00753-9200-0020
1
2
3
4
CH1 +
CMN
CH2 +
CMN
CH Input Mode:
Dry Contact Only
CH Output Mode:
26VDC Max
100mA Max
The Rosemount 702 Transmitter and all other wireless devices should not be
set up until after the Smart Wireless Gateway has been installed and is
functioning properly.
Quick Start Guide April 2018
6Rosemount 702 Wireless Discrete Transmitter
2 Physical installation
The Rosemount 702 Transmitter can be installed in one of two
configurations:
•Direct mount, where the switch is connected directly to the Rosemount
702 Transmitter housing’s conduit entry.
•Remote mount, where the switch is mounted separate from the
Rosemount 702 Transmitter housing, then connected to the Rosemount
702 Transmitter via conduit.
Select the installation sequence that corresponds to the mounting
configuration.
2.1 Direct mount
Note
Direct mount installation should not be employed when using tubing and
connectors such as Swagelok® fittings.
Direct MountFigure 2-1:
A. Rosemount 702 Transmitter
B. Float switch
April 2018 Quick Start Guide
Quick Start Guide 7
Procedure
1. Install the switch according to standard installation practices making sure
to use thread sealant on all connections.
2. Attach the Rosemount 702 Transmitter housing to the switch using the
threaded conduit entry.
3. Attach the switch wiring to the terminals as indicated on the wiring
diagram (see Chapter 5).
4. Connect the Black Power Module.
Note
Wireless devices should be powered up in order of proximity from the
Smart Wireless Gateway, beginning with the closest device to the
Gateway. This will result in a simpler and faster network installation.
5. Close the housing cover and tighten to safety specification. Always
ensure a proper seal so the metal touches metal, but do not over tighten.
6. Position antenna vertically, either straight up or straight down. The
antenna should be approximately 3 ft. (0.91 m) from any large structures
or buildings, to allow clear communication to other devices.
Quick Start Guide April 2018
8Rosemount 702 Wireless Discrete Transmitter
2.2 Remote mount
Remote MountFigure 2-2:
A. Rosemount 702 Transmitter
B. Float switch
Procedure
1. Install the switch according to standard installation practices making sure
to use thread sealant on all connections.
2. Run wiring (and conduit if necessary) from the switch to the Rosemount
702 Transmitter.
3. Pull the wiring through the threaded conduit entry of the Rosemount 702
Transmitter.
4. Attach the switch wiring to the terminals as indicated on the wiring
diagram (see Chapter 5).
5. Connect the black power module.
April 2018 Quick Start Guide
Quick Start Guide 9
Note
Wireless devices should be powered up in order of proximity from the
Smart Wireless Gateway, beginning with the closest device to the
gateway. This will result in a simpler and faster network installation.
6. Close the housing cover and tighten to safety specification. Always
ensure a proper seal so the metal touches metal, but do not over tighten.
7. Position antenna vertically, either straight up or straight down. The
antenna should be approximately 3 ft. (0.91 m) from any large structures
or buildings, to allow clear communication to other devices.
2.3 High gain, remote antenna (optional)
The high gain, remote antenna options provide flexibility for mounting the
Rosemount 702 Transmitter based on wireless connectivity, lightning
protection, and current work practices.
Quick Start Guide April 2018
10 Rosemount 702 Wireless Discrete Transmitter
Altri manuali per Rosemount 702
7
Indice
Altri manuali Emerson Trasmettitore
Emerson
Emerson Rosemount 1056 Manuale utente
Emerson
Emerson Rosemount 3152 Manuale utente
Emerson
Emerson Micro Motion 800 Manuale utente
Emerson
Emerson Rosemount MultiVariable 3051SMV Manuale utente
Emerson
Emerson Rosemount 3051 Manuale utente
Emerson
Emerson Micro Motion 5700 Guida rapida
Emerson
Emerson Liebert SL-31080 Manuale utente
Emerson
Emerson Rosemount 3300 Series Manuale utente
Emerson
Emerson Micro Motion 5700 Manuale utente
Emerson
Emerson MICRO MOTION 2700 Guida rapida
Emerson
Emerson Rosemount HART Modbus VeriCase 3308 Series Manuale utente
Emerson
Emerson Rosemount 848T Manuale utente
Emerson
Emerson Rosemount 3300 Series Manuale utente
Emerson
Emerson Rosemount OCX 8800 Manuale utente
Emerson
Emerson Rosemount 3051G Manuale utente
Emerson
Emerson Rosemount 5408 Manuale utente
Emerson
Emerson Rosemount 708 Manuale utente
Emerson
Emerson MICRO MOTION 1500 Guida rapida
Emerson
Emerson Rosemount Oxymitter 4000 Manuale utente
Emerson
Emerson ROSEMOUNT 5081-A Manuale utente
