Emine ExsorViev Manuale utente
EM-21AS/41AS
USB 2.0 AUTO SWITCH
Share one USB 2.0 Device with
Two or up to Four Computers
User Manual
Introduction............................................................................ P1
Features .......................................................................... P2
Package Contents ........................................................... P2
Specifications .................................................................. P3
Equipment Requirements ................................................ P3
Display Diagrams ............................................................ P4
Installation ............................................................................. P5
Software Installation ........................................................ P5
Hardware Installation....................................................... P6
Operation............................................................................... P8
Manual Switching ............................................................ P9
Auto Switch Settings........................................................ P9
Automatic Print Sharing ................................................. P10
TABLE OF CONTENTS
1
EM-21AS/41AS
INTRODUCTION
Thank you for purchasing Emine’s USB 2.0 Auto Switch.
Incorporating fast USB 2.0 technology (up to 480 Mbps) the Auto
Switch allows 2 (EM-21AS) or up to 4 (EM-41AS) computers (PCs
& Macs) direct access to a single USB (1.1/2.0) compliant device -
such as a scanner, a printer, a digital camera or an external HDD.
Compact with modern styling the Auto Switch offers convenient
and easy-to-use switching software (Windows users*) that delivers
immediate access to your USB device. Once connected, your
device stays available to all connected computers, eliminating the
need for you to unplug and reconnect it to another computer.
* Only manual switching is available for Mac users.
2
EM-21AS/41AS
FEATURES
n
Allows 2 (EM-21AS) or up to 4 (EM-41AS) computers (PCs &
Macs) to access a single USB device
n
Installs in minutes
n
Fully compliant with the USB 2.0 specification (up to 480 Mbps
data transfer rate)
n
Supports all USB 1.1 and USB 2.0 devices
n
Easy PC Switching with AOD (Access-On-Demand) Peripheral
Switching Software for Windows users
n
One-touch manual switching via push button selector
n
Supports idle Time-out switching & Automatic printer sharing
n
Supports Windows® 98SE, Me, 2000, XP, and Mac® OS
n
Light-Emitting Diode (LEDs) for status monitoring
n
Non-powered
PACKAGE CONTENTS
Item Qty Remark
EM-21AS/41AS 1 USB 2.0 Auto Switch
USB 2.0 Cable 1 USB Type A to Type B
CD 1 Software installation &
User Manual
3
EM-21AS/41AS
SPECIFICATIONS
Note: Specifications are subject to change without notice.
EQUIPMENT REQUIREMENTS
Cables
To connect to the Auto Switch, each computer requires a USB
device cable (A to B).The following Hi-Speed USB Device Cable
is recommended for use with EMINE’s (EM-21AS/41AS) Auto
Switch.
n Emine Hi-Speed USB (2.0) device cable (1.8m)
EM-21AS EM-41AS
USB Device port Connector :
USB Type A Receptacle
USB Type B Receptacle
USB Computer port Connector :
USB V1.1~V2.0 compliant
Computer Connections 24
LED Indicators 35
Power BUS powered
Temperature 0-40 deg .C in operating ; -20-60 deg. C in storage
Humiaity 0 – 80% RH, non-condensing
Enclosure Plastic
Dimensions(WxDxH) 96 x57 x22mm
Weight 75g 82g
4
EM-21AS/41AS
DISPLAY DIAGRAMS
Front View
Rear View
5
EM-21AS/41AS
SOFTWARE INSTALLATION (Windows Users)
Before you begin, make sure that:
1. The Auto switch is not connected to your computers.
2. The Auto Switch and your peripheral USB devices
support your operating system.
To install the software:
1. Insert Emine’s software CD in your PC.
2. Double-click on “My Computer”.
3. Double-click on the CD-ROM drive.
4. Double-click on the file named “Setup.exe”
5. Setup will create a “USB_SWITCH” icon on your taskbar
and desktop.
6. Repeat all steps for each additional computer you wish to
connect.
Desktop
Monitor
Shortcut to “USB Switch Control”
6
EM-21AS/41AS
HARDWARE INSTALLATION
Connecting the Computers
1. Connect the USB cable’s A-type connector to an available USB
port on your computer.
2. Connect the USB cable’s B-type connector to any port on the
Auto Switch.
3. Repeat steps 1 and 2 for each additional computer
you wish to connect.
7
EM-21AS/41AS
Connecting your USB Device
1. Connect the A-type connector cable of your USB device to the
A-type USB port on the Auto Switch.
2. Install the drivers for your USB (1.1 / 2.0) device. Refer to the
device’s user manual for additional information on installing the
driver.
3. Now your USB 2.0 Auto Switch is ready for use.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Emine Interruttore
