Emos GoSmart H5011 Manuale utente
H5011
GB GoSmart Scene Switch
CZ GoSmart scénický vypínač
SK GoSmart scénický vypínač
PL GoSmart kontroler scen
HU GoSmart jelenetkapcsoló
SI GoSmart scensko stikalo
RS|HR|BA|ME GoSmart prekidač za promjenu scene
DE GoSmart Szenenumschalter
UA GoSmart перемикач сцен
RO|MD GoSmart întrerupător scenic
LT „GoSmart“ scenos jungiklis
LV GoSmart Scene slēdzis
EE GoSmart stseenilüliti
BG Интелигентен превключвател GoSmart
FR|BE Interrupteur scénique GoSmart
IT Interruttore panoramico GoSmart
NL GoSmart scèneschakelaar
ES GoSmart interruptor de escena
PT Interruptor de cenas GoSmart
GR|CY GoSmart διακόπτης διευθέτησης χώρου
SE GoSmart scenomkopplare
FI GoSmart-skenaariokytkin
DK GoSmart scenekontakt
www.emos.eu
GB | 1
H5011 | H5012 | H5013
H5014 | H5015 | H5016
GB | GoSmart Scene Switch
Contents
Safety Instructions and Warnings ....................................................................................2
Package Contents .............................................................................................................3
Technical Specications....................................................................................................3
Device Description.............................................................................................................4
Installation and Assembly.................................................................................................5
Controls and Functions .....................................................................................................9
Troubleshooting FAQ........................................................................................................11
zdroj: 3069050110_31-H5011_00_01_WEB_KNIHA
GB | 2
Safety Instructions and Warnings
Read the user manual before using the device.
Follow the safety instructions in the manual.
EMOS spol. s r.o. declares that products H5011, H5012, H5013, H5014, H5015, H5016 conform to the basic
requirements and other applicable provisions of relevant directives. The device can be freely operated in the EU.
The Declaration of Conformity can be found at http://www.emos.eu/download.
The device can be operated on the basis of general authorization no. VO-R/10/07.2021-8, as amended.
GB | 3
Package Contents
Smart scene switch
User manual
2× double-sided tape
86 mm 14 mm
86 mm
Technical Specications
Power supply: CR2430 3 V
Dimensions: 86 × 86 × 13 mm
Communication protocol: ZigBee 3.0
(2,402~2,480 MHz)
EIRP: 5.05 dBm
Operating range: 25 m (open space)
Operating temperature: -10 °C – 45 °C
Operating air humidity: ≤ 90 % RH
Battery life: 50,000 presses
GB | 4
Device Description
The smart scene switch is a smart device that enables you to easily control the scenes in your smart house-
hold. Using the scene switch, you can quickly and easily change the settings for your lightning, temperature
and other devices in the room.
H5011 H5014 H5012 H5015 H5013 H5016
1-button, 2-button 4-button version
The choice of the number of buttons depends on the customer‘s needs. 1 button is capable of recognising
3 types of presses: a short press, a double press and a long press (> 1 second). Each type of press can be
assigned a dierent function.
This allows the 1-button switch to control 3 functions, the 2-button switch 6 functions and the 4-button
switch up to 12 functions.
GB | 5
Installation and Assembly
2.4 GHz 5 GHz
Attention
The smart scene switch only communicates with a
ZigBee gateway, such as EMOS H5001. The ZigBee
gateway provides connection and communication
between smart ZigBee devices in the household,
allowing them to be controlled and managed
through a centralised interface. This enables au-
tomation, monitoring and centralised control over
your smart devices.
Installation
Since the device is powered solely by a battery, it
can be mounted onto a wall or attached anywhere
within the range of the ZigBee network using
the enclosed double-sided tape. The switch can,
therefore, be placed on a table, a wall or mounted
in place of a standard light switch.
The back cover of the device is also designed for
mounting into a standard junction box used for
traditional light switches. Thanks to pre-dened
openings, mounting the switch is quick and easy.
However, the junction boxes that the switch can
be mounted onto may have a dierent diameter.
In that case, you can drill holes into the back cover
of the smart switch to t the given junction box.
Inserting Batteries
The device is powered by a CR2430 battery, which
is not included. The battery must be inserted into
the slot located under the rear cover of the device.
Pairing with the App
Installing the EMOS GoSmart App
• The app is available for Android and iOS on Google Play and App Store.
• Download the app by scanning the QR code.
GB | 6
Steps in the EMOS GoSmart Mobile App
1. Open EMOS GoSmart and conrm the privacy policy by tapping Agree.
2. Choose Sign Up.
3. Enter a valid e-mail address and choose a password.
4. Conrm that you agree to the privacy policy.
5. Choose Sign Up.
6. Choose Add Device.
GB | 7
7. Choose the GoSmart product category and choose the corresponding switch.
8. Choose which ZigBee gateway you want to connect the switch to.
9. Follow the instructions in the pairing manual and reset the device by holding the button for 10 seconds.
10.The device will be detected automatically.
You can now assign a name to the smart scene switch. Then tap Done. Your smart scene switch is now
ready to use.
GB | 8
Icons and Indicators
Battery indicator – thanks to the
energy-saving ZigBee 3.0 protocol,
the battery can last through 50,000
switch presses
Chosen button
Adds an action for when the button
is pressed
Advanced settings
Explanation of Advanced Settings
Device information – basic information about the device
Tap-To-Run and Automation – scenes and automations assigned to the device
(however, does not display automations that the button performs on its own)
Oine notication - notication when the device is oine for over 8 hours
(e.g. power outage)
Share Device – shares control of the device with another person
Create Group – creates a group of similar devices (most suitable for lights,
e.g. for putting all lights in the kitchen in the same group)
Faq and Feedback – frequently asked questions and feedback
Add to Home screen – adds an icon for the device on the phone‘s home screen
Device Update – updates the device
Remove Device – unpairs the device
Questo manuale è adatto per i seguenti modelli
5
Indice
Lingue:
Altri manuali Emos Interruttore
