Endress+Hauser Levelflex FMP53 Specifiche tecniche
Brief Operating Instructions
Levelflex FMP53
Guided Level-Radar
These Instructions are Brief Operating Instructions; they do not replace the
Operating Instructions included in the scope of supply.
For detailed information, refer to the Operating Instructions and other
documentation on the CD-ROM provided or visit "www.endress.com/
deviceviewer".
KA01108F/00/EN/01.12
71163452
Table of contents Levelflex FMP53
2 Endress+Hauser
Table of contents
1 Important document information ............................... 3
1.1 Document conventions ........................................... 3
2 Basic safety instructions ...................................... 5
2.1 Requirements concerning the staff ...................................... 5
2.2 Designated use ............................................... 5
2.3 Workplace safety .............................................. 6
2.4 Operational safety .............................................. 6
2.5 Product safety ................................................ 6
3 Product description ......................................... 7
3.1 Compact device Levelflex .......................................... 7
3.2 Electronics housing ............................................. 8
4 Incoming acceptance and product identification ..................... 9
4.1 Incoming acceptance ............................................ 9
4.2 Product identification ........................................... 10
5 Storage, Transport ........................................ 11
5.1 Storage conditions ............................................. 11
5.2 Transport product to the measuring point .................................. 11
6 Mounting ............................................... 13
6.1 Suitable mounting position ......................................... 13
6.2 Special mounting conditions ........................................ 14
6.3 Mounting the device ............................................ 16
6.4 Post-installation check ........................................... 18
7 Electrical connection ....................................... 19
7.1 Connection options ............................................ 19
7.2 Connection conditions ........................................... 21
7.3 Connection data .............................................. 22
7.4 Connecting the measuring device ...................................... 22
7.5 Post-connection check ........................................... 24
8 Integration into a FOUNDATION Fieldbus network .................. 25
8.1 Device Description (DD) .......................................... 25
8.2 Integration into the FOUNDATION Fieldbus network ............................ 25
8.3 Device identification and addressing .................................... 25
8.4 Block model ................................................ 27
8.5 Assignment of the measured values (CHANNEL) in an AI Block ....................... 28
8.6 Methods .................................................. 29
9 Commissioning via operating menu (On-site display, FieldCare) ......... 30
9.1 Display and operating module ....................................... 30
9.2 Operating concept ............................................. 32
9.3 Adjust the display contrast ......................................... 34
9.4 Unlock the device ............................................. 34
9.5 Set the operating language ......................................... 36
9.6 Configuration of a level measurement .................................... 37
9.7 User-specific applications (operation) .................................... 38
10 Commissioning with a FOUNDATION Fieldbus configuration program (block-
oriented operation) ........................................ 38
10.1 Block configuration ............................................ 38
Levelflex FMP53 Important document information
Endress+Hauser 3
10.2 Scaling of the measured value in an AI Block ................................ 40
10.3 Language selection ............................................. 41
10.4 Configuration of a level measurement .................................... 42
10.5 Configuration of the on-site display ..................................... 44
10.6 Configuration management ......................................... 44
10.7 Protection of the settings against unauthorized changes ........................... 45
1 Important document information
1.1 Document conventions
1.1.1 Safety symbols
Symbol Meaning
DANGER
A0011189-EN
DANGER!
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in serious
or fatal injury.
WARNING
A0011190-EN
WARNING!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious
or fatal injury.
CAUTION
A0011191-EN
CAUTION!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in minor
or medium injury.
NOTICE
A0011192-EN
NOTICE!
This symbol contains information on procedures and other facts which do not result in personal
injury.
1.1.2 Electrical symbols
Symbol Meaning
A0011197
Direct current
A terminal to which DC voltage is applied or through which direct current flows.
A0011198
Alternating current
A terminal to which alternating voltage (sine-wave) is applied or through which alternating current flows.
)
A0011200
Ground connection
A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.
*
A0011199
Protective ground connection
A terminal which must be connected to ground prior to establishing any other connections.
A0011201
Equipotential connection
A connection that has to be connected to the plant grounding system: This may be a potential equalization
line or a star grounding system depending on national or company codes of practice.
Important document information Levelflex FMP53
4 Endress+Hauser
1.1.3 Tool symbols
A0011219 A0011220 A0013442 A0011221 A0011222
Phillips head
screwdriver
Flat blade
screwdriver Torx screwdriver Allen key Hexagon wrench
1.1.4 Symbols for certain types of information
Symbol Meaning
A0011182
Allowed
Indicates procedures, processes or actions that are allowed.
A0011183
Preferred
Indicates procedures, processes or actions that are preferred.
A0011184
Forbidden
Indicates procedures, processes or actions that are forbidden.
A0011193
Tip
Indicates additional information.
A0011194
Reference to documentation
Refers to the corresponding device documentation.
A0011195
Reference to page
Refers to the corresponding page number.
A0011196
Reference to graphic
Refers to the corresponding graphic number and page number.
,…
,
Series of steps
ÃResult of a sequence of actions
1.1.5 Symbols in graphics
Symbol Meaning
1, 2, 3 ... Item numbers
,…
,
Series of steps
A, B, C, ... Views
A-A, B-B, C-C, ... Sections
Levelflex FMP53 Basic safety instructions
Endress+Hauser 5
Symbol Meaning
-
A0011187
Hazardous area
Indicates a hazardous area.
.
A0011188
Safe area (non-hazardous area)
Indicates a non-hazardous location.
2 Basic safety instructions
2.1 Requirements concerning the staff
The staff must fulfill the following requirements for their tasks:
►Trained staff: Must have a qualification which corresponds to their function and tasks.
►Authorized by the plant operator.
►Familiar with the national regulations.
►Before starting their work: Must have read and understood all instructions in the operating
manual and supplementary documentation as well as the certificate (depending on the
application).
►Must comply with all instructions and the regulatory framework.
2.2 Designated use
Application and measured materials
The measuring device described in these Operating Instructions is intended only for level
measurement of liquids. Depending on the version ordered the device can also measure
potentially explosive, flammable, poisonous and oxidizing materials.
Observing the limit values specified in the "Technical data" and listed in the Operating
Instructions and supplementary documentation, the measuring device may be used for the
following measurements only:
►Measured process variables: level
►Calculated process variables: Volume or mass in arbitrarily shaped vessels (calculated from
the level by the linearization functionality)
To ensure that the measuring device remains in proper condition for the operation time:
►Use the measuring device only for measured materials against which the process-wetted
materials are adequately resistant.
►Observe the limit values in "Technical data".
Incorrect use
The manufacturer is not liable for damage caused by improper or non-designated use.
Verification for borderline cases:
►For special measured materials and cleaning agents, Endress+Hauser is glad to provide
assistance in verifying the corrosion resistance of wetted materials, but does not accept any
warranty or liability.
Basic safety instructions Levelflex FMP53
6 Endress+Hauser
Residual risk
The electronics housing and its built-in components such as display module, main electronics
module and I/O electronics module may heat to 80 °C (176 °F) during operation through heat
transfer from the process as well as power dissipation within the electronics. During operation
the sensor may assume a temperature near the temperature of the measured material.
Danger of burns due to heated surfaces!
►For high process temperatures: Install protection against contact in order to prevent burns.
2.3 Workplace safety
For work on and with the device:
►Wear the required personal protective equipment according to federal/national regulations.
2.4 Operational safety
Risk of injury!
►Operate the device in proper technical condition and fail-safe condition only.
►The operator is responsible for interference-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers
►If, despite this, modifications are required, consult with Endress+Hauser.
Repair
To ensure continued operational safety and reliability,
►Carry out repairs on the device only if they are expressly permitted.
►Observe federal/national regulations pertaining to repair of an electrical device.
►Use original spare parts and accessories from Endress+Hauser only.
Hazardous area
To eliminate a danger for persons or for the facility when the device is used in the hazardous
area (e.g. explosion protection, pressure vessel safety):
►Based on the nameplate, check whether the ordered device is permitted for the intended use
in the hazardous area.
►Observe the specifications in the separate supplementary documentation that is an integral
part of these Instructions.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet state-
of-the- art safety requirements, has been tested, and left the factory in a condition in which they
are safe to operate.
It fulfills general safety requirements and legal requirements. It also conforms to the EC directives
listed in the device-specific EC declaration of conformity. Endress+Hauser confirms this fact by
applying the CE mark.
Levelflex FMP53 Product description
Endress+Hauser 7
3 Product description
3.1 Compact device Levelflex
1
2
3
A0013421
å 1 Design of the Levelflex
1Electronics housing
2 Process connection
3 Rod probe
Product description Levelflex FMP53
8 Endress+Hauser
3.2 Electronics housing
Esc
–+E
123
4
5
6
9
7
8
A0012422
å 2 Design of the electronics housing
1Electronics compartment cover
2 Display module
3 Main electronics module
4 Cable glands (1 or 2, depending on instrument version)
5 Nameplate
6 I/O electronics module
7 Terminals (pluggable spring terminals)
8 Connection compartment cover
9 Grounding terminal
Levelflex FMP53 Incoming acceptance and product identification
Endress+Hauser 9
4 Incoming acceptance and product identification
4.1 Incoming acceptance
A0013696
DELIVERY NOTE
1 = 2
A0016870
A0013921
A0013696 A0013922
Incoming acceptance and product identification Levelflex FMP53
10 Endress+Hauser
A0013696
DELIVERY NOTE
Made in Germany, 79689 Maulburg
A0014038
A0013696
A0014037
If one of the conditions does not comply, contact your Endress+Hauser distributor.
4.2 Product identification
The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
•Enter serial numbers from nameplates in W@M Device Viewer
( www.endress.com/deviceviewer ): All information about the measuring device is displayed.
For an overview of the scope of the Technical Documentation provided, refer to the following:
enter serial numbers from nameplates in W@M Device Viewer
( www.endress.com/deviceviewer )
Altri manuali per Levelflex FMP53
11
Indice
Altri manuali Endress+Hauser Livello laser
Endress+Hauser
Endress+Hauser Micropilot M FMR240 Manuale utente
Endress+Hauser
Endress+Hauser Micropilot M FMR231 Specifiche tecniche
Endress+Hauser
Endress+Hauser Micropilot M FMR244 Specifiche tecniche
Endress+Hauser
Endress+Hauser Levelflex M FMP45 Manuale utente
Endress+Hauser
Endress+Hauser Prosonic T FMU30 Manuale
Endress+Hauser
Endress+Hauser Liquicap M FMI51 Manuale utente
Endress+Hauser
Endress+Hauser Levelflex FMP55 Manuale utente
Endress+Hauser
Endress+Hauser FMU 40 Istruzioni per l'uso e l'installazione
Endress+Hauser
Endress+Hauser Waterpilot FMX21 Manuale utente
