Endress+Hauser Levelflex FMP51 Specifiche tecniche

Brief Operating Instructions

Levelflex FMP51, FMP52, FMP54

Guided Level-Radar

These Instructions are Brief Operating Instructions; they do not replace the

Operating Instructions included in the scope of supply.

For detailed information, refer to the Operating Instructions and other

documentation on the CD-ROM provided or visit "www.endress.com/

deviceviewer".

KA01077F/00/EN/05.10

71113565

Table of contents Levelflex FMP51, FMP52, FMP54

2 Endress+Hauser

Table of contents

1 Important document information ............................... 3

1.1 Document conventions ........................................... 3

2 Basic safety instructions ...................................... 5

2.1 Requirements concerning the staff ...................................... 5

2.2 Designated use ............................................... 5

2.3 Occupational safety ............................................. 6

2.4 Operational safety .............................................. 6

2.5 Product safety ................................................ 6

3 Product description ......................................... 7

3.1 Compact device Levelflex .......................................... 7

3.2 Electronics housing ............................................. 8

4 Incoming acceptance and product identification ..................... 9

4.1 Incoming acceptance ............................................ 9

4.2 Product identification ........................................... 10

5 Storage, Transport ........................................ 11

5.1 Storage conditions ............................................. 11

5.2 Transport product to the measuring point .................................. 11

6 Mounting ............................................... 12

6.1 Suitable mounting position ......................................... 12

6.2 Additional mounting hints ......................................... 14

6.3 Mounting the device ............................................ 23

6.4 Post-installation check ........................................... 28

7 Electrical connection ....................................... 29

7.1 Connection options ............................................ 29

7.2 Connection conditions ........................................... 32

7.3 Connection data .............................................. 33

7.4 Connecting the measuring device ...................................... 35

7.5 Post-connection check ........................................... 37

8 Commissioning ........................................... 38

8.1 Display and operating module ....................................... 38

8.2 Operation concept ............................................. 40

8.3 Adjust the display contrast ......................................... 42

8.4 Unlock the device ............................................. 42

8.5 Set the operating language ......................................... 44

8.6 Configuration of a level measurement .................................... 45

8.7 Configuration of an interface measurement ................................. 46

8.8 User-specific applications (operation) .................................... 47

Levelflex FMP51, FMP52, FMP54 Important document information

Endress+Hauser 3

1 Important document information

1.1 Document conventions

1.1.1 Safety symbols

Symbol Meaning

DANGER

A0011189-EN

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will

result in serious or fatal injury.

WARNING

A0011190-EN

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in serious or fatal injury.

CAUTION

A0011191-EN

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in minor or medium injury.

NOTICE

A0011192-EN

NOTE!

This symbol contains information on procedures and other facts which do not result

in personal injury.

1.1.2 Electrical symbols

Symbol Meaning

A0011197

Direct current

A terminal to which DC voltage is applied or through which direct current flows.

A0011198

Alternating current

A terminal to which alternating voltage (sine-wave) is applied or through which alternating current flows.

)

A0011200

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.

A0011199

Protective ground connection

A terminal which must be connected to ground prior to establishing any other connections.

A0011201

Equipotential connection

A connection that has to be connected to the plant grounding system: This may be a potential equalization

line or a star grounding system depending on national or company codes of practice.

1.1.3 Tool symbols

A0011219 A0011220 A0013442 A0011221 A0011222

Phillips head

screwdriver

Flat blade

screwdriver Torx screwdriver Allen key Hexagon wrench

Important document information Levelflex FMP51, FMP52, FMP54

4 Endress+Hauser

1.1.4 Symbols and notation for certain types of information

Symbol Meaning

A0011182

Allowed

Indicates procedures, processes or actions that are allowed.

A0011183

Preferred

Indicates procedures, processes or actions that are preferred.

A0011184

Forbidden

Indicates procedures, processes or actions that are forbidden.

A0011193

Tip

Indicates additional information.

A0011194

Reference to documentation

Refers to the corresponding device documentation.

A0011195

Reference to page

Refers to the corresponding page number.

A0011196

Reference to graphic

Refers to the corresponding graphic number and page number.

1., 2., 3. Series of steps

ÃResult of a sequence of actions

1.1.5 Symbols and notation in graphics

Symbol Meaning

1,2,3 ... Item numbers

A, B, C, ... Views

A-A, B-B, C-C, ... Sections

A0011187

Hazardous area

Indicates a hazardous area.

A0011188

Safe area (non-hazardous area)

Indicates a non-hazardous location.

Levelflex FMP51, FMP52, FMP54 Basic safety instructions

Endress+Hauser 5

2 Basic safety instructions

2.1 Requirements concerning the staff

The staff must fulfill the following requirements for their tasks:

►Trained staff: Must have a qualification which corresponds to their function and tasks.

►Authorized by the plant operator.

►Familiar with the national regulations.

►Before starting their work: Must have read and understood all instructions in the operating

manual and supplementary documentation as well as the certificate (depending on the

application).

►Must comply with all instructions and the regulatory framework.

2.2 Designated use

Area of application and measured materials

The device described in these Operating Instructions is to be used only for level and interface

measurements of liquids. Depending on the ordered version the device can also measure

explosion-hazardous, flammable, poisonous or oxidizing materials.

Subject to the limit values specified in the "Technical Data" and the regulatory framework listed

in the manual as well as the associated documentation, the device may only be used for the

following measuring tasks:

►Measured process variable: Level and/or interface

►Calculated process variable: Volume oder mass in arbitrarily shaped vessels (calculated from

the level by the linearization functionality)

In order to ensure the proper state of the measuring device through the operating time:

►Only use the measuring device for materials to which the wetted parts of the device are

sufficiently resistant.

►Comply with the limits specified in the "Technical Data".

Misuse

The manufacturer is not liable for damage resulting from incorrect or non-designated use.

Borderline cases:

►For special measuring materials and cleaning agents: Endress+Hauser will assist with

identifying the corrosion resistance of wetted parts but does not accept any warranty or

liabilty.

Residual risk

The heating up of the housing surface due to the power consumption in the electronic

components ammounts to a maximum of 20 K. If the probe is in contact with hot measuring

materials, there is an additional heating up of the housing surface. Especially the process

connection may heat up to nearly the process temperature.

Danger of burns owing to high process temperatures!

►For high process temperatures: Install protection against contact in order to prevent burns.

Basic safety instructions Levelflex FMP51, FMP52, FMP54

6 Endress+Hauser

2.3 Occupational safety

When working at the device:

►Wear the necessary protective clothing in accordance with national regulations.

2.4 Operational safety

Danger of injury!

►Only operate the device if it is technically in faultless and reliable condition.

►The operator is responsible for faultless operation of the device.

Constructional changes at the device

Unauthorized changes of the mechanical construction of the device are prohibited and may result

in unforeseeable risks:

►If constructional changes are required: Contact Endress+Hauser.

Repairs

In order to ensure operational safety:

►Only perform repairs to the device if they are expressly allowed.

►Observe the national regulations concerning the repair of an electrical apparatus.

►Only use original Endress+Hauser spare parts.

Approval relevant areas

In order to prevent risks for humans or for the plant when operating the device in approval

relevant areas (e.g. explosion protection, pressure equipment safety):

►Check the nameplate to make sure if the ordered device is suited for the intended application

in an approval relevant area.

2.5 Product safety

The device is designed to meet state-of-the-art safety requirements, has been tested and left the

factory in a condition in which it is safe to operate.

The device complies with the applicable standards and regulations as listed in the EC declaration

of conformity and thus complies with the statutory requirements of the EG directives. Endress

+Hauser confirms the successful testing of the device by affixing to it the CE mark.

Levelflex FMP51, FMP52, FMP54 Product description

Endress+Hauser 7

3 Product description

3.1 Compact device Levelflex

A0014167

å 1 Design of the Levelflex

1Electronics housing

2 Process connection (here as an example: flange)

3 Rope probe

4 End of probe weight

5 Rod probe

6 Coax probe

Product description Levelflex FMP51, FMP52, FMP54

8 Endress+Hauser

3.2 Electronics housing

Esc

–+E

123

A0012422

å 2 Design of the electronics housing

1Electronics compartment cover

2 Display module

3 Main electronics module

4 Cable glands (1 or 2, depending on instrument version)

5 Nameplate

6 I/O electronics module

7 Terminals (pluggable spring terminals)

8 Connection compartment cover

9 Grounding terminal

Levelflex FMP51, FMP52, FMP54 Incoming acceptance and product identification

Endress+Hauser 9

4 Incoming acceptance and product identification

4.1 Incoming acceptance

A0013696

DELIVERY NOTE

1 = 2

A0014041

A0013921

A0013696 A0013922

A0013696

DELIVERY NOTE

Ext. ord. cd.:

Order code:

Ser. no.:

Made in Germany, 79689 Maulburg

Levelflex

Ex i

Ex d

Compartment

FMP50-B4234567890123+

012345678901234567890123456789012

LN =

4...20 mA HART

12...30 V DC / 2-wire

Switch output

3600 psi

Lref = 550mm

35000mm

Mat.: Graphite, 316L,316,Alloy C22Al203,

Date: 250002796-A

IP68 / 66 NEMA 4X / 6P

Z-65.16-354

2010-03

WARNING - Potential electrostatic

FISCO

M20x1.5 / M16x1.5

FW: 01.00.00 Dev.Rev.: 1 ex works

DeviceID:

Ta > 60 °C:

Ta: -40...+80 °C

452B481005-A91234010AB

12345678901234

if modification

see sep. label

X =

charging harzard - see instructions

MWP:

KEMA 10ATEX????

II 1/2 G Ex ia IIC T6 Ga/Gb

II 1/2 G Ex d [ia] IIC T6 Ga/Gb

XA500F--

A0014038

Incoming acceptance and product identification Levelflex FMP51, FMP52, FMP54

10 Endress+Hauser

A0013696

A0014037

If one of the conditions does not comply, contact your Endress+Hauser distributor.

4.2 Product identification

The following options are available for identification of the measuring device:

• Nameplate specifications

• Order code with breakdown of the device features on the delivery note

•Enter serial numbers from nameplates in W@M Device Viewer

( www.endress.com/deviceviewer ): All information about the measuring device is displayed.

For an overview of the scope of the Technical Documentation provided, refer to the following:

enter serial numbers from nameplates in W@M Device Viewer

( www.endress.com/deviceviewer )

Order code:

Ext. ord. cd.:

Ser. no.:

A0014103

å 3 Example of a nameplate

1Order code

2 Serial number (Ser. no.)

3 Extended order code (Ext. ord. cd.)

Altri manuali per Levelflex FMP51

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Endress+Hauser Radar

Endress+Hauser

Endress+Hauser Levelflex FMP53 FOUNDATION Fieldbus Manuale utente

Endress+Hauser

Endress+Hauser Levelflex FMP56 Manuale

Endress+Hauser

Endress+Hauser Micropilot FMR50 Specifiche tecniche

Endress+Hauser

Endress+Hauser Micropilot FMR60 Istruzioni per l’uso

Endress+Hauser

Endress+Hauser Micropilot M FMR245 Manuale utente

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Manuale utente

Endress+Hauser

Endress+Hauser Levelflex FMP53 PROFIBUS PA Specifiche tecniche

Endress+Hauser

Endress+Hauser Micropilot FMR53 Manuale

Endress+Hauser

Endress+Hauser Levelflex FMP56 Specifiche tecniche

Endress+Hauser

Endress+Hauser Micropilot FMR56 Specifiche tecniche

Endress+Hauser

Endress+Hauser Hart Micropilot FMR60B Manuale

Endress+Hauser

Endress+Hauser Micropilot S FMR540 Istruzioni per l'installazione

Endress+Hauser

Endress+Hauser Levelflex FMP55 PROFIBUS PA Specifiche tecniche

Endress+Hauser

Endress+Hauser Micropilot FMR63B PROFIBUS PA Manuale

Endress+Hauser

Endress+Hauser Levelflex FMP53 Manuale utente

Endress+Hauser

Endress+Hauser Micropilot FMR60B PROFIBUS PA Manuale utente

Endress+Hauser

Endress+Hauser Micropilot FMR63B PROFIBUS PA Manuale utente

Endress+Hauser

Endress+Hauser FOUNDATION Fieldbus Micropilot FMR51 Specifiche tecniche

Endress+Hauser

Endress+Hauser Levelflex FMP55 Manuale utente

Endress+Hauser

Endress+Hauser Micropilot M FMR250 Manuale utente

Endress+Hauser

Endress+Hauser Micropilot M FMR250 Manuale utente

Endress+Hauser

Endress+Hauser Levelflex FMP51 Manuale utente

Endress+Hauser

Endress+Hauser Micropilot FMR51 Manuale utente

Endress+Hauser

Endress+Hauser Micropilot FMR50 Istruzioni per l'uso e l'installazione

Manuali Radar popolari di altre marche

SAW D2L

SAW D2L Valentine One Gen2 Manuale utente

Raymarine

Raymarine Raytheon R20X Manuale utente

Simrad

Simrad CA34 Manuale utente

ECHOMAX

ECHOMAX Active-X-Band Manuale utente

AGD

AGD 340 Manuale utente

Kustom Signals

Kustom Signals Eagle 3 Manuale utente

SYMEO

SYMEO STU Manuale utente

Axis

Axis D2110-VE Manuale utente

MALA

MALA MIRA Manuale utente

Emerson

Emerson ROSEMOUNT 5300 Manuale utente

Rosemount

Rosemount 5300 Series Manuale utente

TERMA

TERMA SCANTER 5102 Manuale utente

GSSI

GSSI UtilityScan Manuale utente

Acconeer

Acconeer A111 Manuale utente

Crosley

Crosley CR37 Manuale utente

AGD

AGD 318 Manuale utente

Cobra

Cobra SLR 650G Manuale utente

Faselase

Faselase D10 Manuale utente