Eneo NLD-1401 Manuale utente

New H.264 Network Camera

Installation Guide

English Version 1.0

Model : NLD-1401

1. Product Description

This manual applies to the NLD-1401 dome.

The NLD-1401 vandal resistant dome is a Hybrid analogue and IP camera. It

has a standard composite BNC out put allowing it to be connected via coax to a

traditional coax based CCTV system, as well as being connected to an IP based

system.

The NLD-1401 comes supplied with its own viewing software which allows the user

to View, record and configures the camera. Viewing and configuration can also be

carried out via a web browser such as Internet Explorer.

The alarm input and alarm output can be used to connect various third party

devices, such as, door sensors and alarm bells.

Installation Steps

Follow these steps to install the NLD-1401 on your local network (LAN):

1. Check the package contents against the list below.

2. Connect the NLD-1401. See page 5.

3. Set an IP address. See page 5.

4. Set the password. See page 7.

Package Components

The system comes with the following components:

NLD-1401 Installation CD Installation Guide

Contents in the installation CD

1. The NLD-1401 User’s Manual

2. The NT-Manager16 Client Software User’s Manual

3. The NT-Manager16 Installation software

2. Installation

For the operation of the NLD-1401, it is necessary to connect: a network cable

for data transmission; a power connection from the supplied power adapter and

possibly a coax cable for standard analogue viewing. Depending on operation

methods, it is possible to connect: alarm cables and audio cable.

Overview

• Top View

NO Name Description

1 Lens Allows wide area to be monitored

2 Extension Cable 26pin camera extension cable

• Extension Cable

NO Wire Color Description

1 Red: AC24V/DC12V

White: AC24V/GND Main Power, 2pin terminal, DC12V/AC24V, max. 6.5W

2 Green: AC24V/DC12V

Black: AC24V/GND Heater Power, 2pin terminal, max. 10Watt @ DC12V,

max. 10W @ AC24V

Pink: Alarm In

Yellowish Green: GND

Yellow: AD Key

Brown: GND

Light Blue: Alarm Out

Gray: GND

Alarm Input, AD Key Input, Alarm Output:

6pin terminal.

4 Black Ethernet, RJ-45 port compatible with 10/100Mbps PoE.

Modular Jack

5 Black Video Composite Output, BNC Jack

6 Gray Audio line output, Stereo Jack

7 Black Audio line input, Stereo Jack

Network Connection

The NLD-1401 supports the operation through the network. Therefore, it is

necessary to connect a standard RJ-45 cable to it. Generally a cross-over cable

is used for directly connection to PC, while a direct cable is used for connection

to a hub.

IP Assignment

When a camera, Encoder or Decoder is first connected to the network it has no

IP address. So, it is necessary to allocate an IP address to the device with the

“Smart Manager” utility on the CD.

1. Connect the NLD-1401 / device to the network and power up.

2. Start SmartManager utility (All Programs>NT-Manager16>SmartManager),

the main window will be displayed, after a short while any network devices

connected to the network will be displayed in the list.

3. Select the camera on the list and click right button of the mouse. You can

see the pop-up menu as below.

4. Select Assign IP. You cam see an Assign IP window.

Enter the required IP address.

Note: For more information, refer to the Smart Manger User’s Manual.

3. Operation

The NLD-1401 can be used with Windows operating system and browsers. The

recommended browsers are Internet Explorer, Safari, Firefox and Google

Chrome with Windows.

Notes: To view streaming video in Microsoft Internet Explorer, set your browser

to allow ActiveX controls.

3.1 Access from a browser

1. Start a browser (Internet Explorer).

2. Enter the IP address or host name of the NLD-1401 in the Location/ Address

field of your browser.

3. You can see a starting page. Click Live View or Setup to enter web page.

4. The encoder’s Live View page appears in your browser.

3.2. Access from the internet

Access from the internet once connected, the NLD-1401 is accessible on your

local network (LAN). To access the NLD-1401 from the Internet you must

configure your broadband router to allow incoming data traffic to the it. To do

this, enable the NAT-traversal feature, which will attempt to automatically

configure the router to allow access to the NLD-1401. This is enabled from

Setup > System > Network > NAT.

For more information, please see NAT traversal (port mapping) for IPv4, on

page 61, the User’s Manual.

3.3 Setting the administrator password

o gain access to the product, the

password for the default administrator user

must be set. This is done in the “Admin

Password” dialog, which is displayed when

the NLD-1401 is accessed for the setup at

the first time. Enter your admin name and

password, set by the administrator.

Note: The default administrator username

and password is “admin”. If the password

is lost, the NLD-1401 must be reset to the

factory default settings. See page 10.

3.4 Live View Page

he live view page comes in

eight screen modes like

704x480(576), 704x240(288),

352x240(288), 176x120(144),

640x480, 320x240, and

160x120. Users are allowed to

select the most suitable one out

of those modes. Please, adjust

the mode in accordance with

your PC specifications and

monitoring purposes.

• General controls

The video drop-down list allows you to select a customized or pre-

programmed video stream on the live view page.

The resolution drop-down list allows you to select the most

suitable one out of video resolutions to be displayed on live view page.

The protocol drop-down list allows you to select which

combination of protocols and methods to use depends on your viewing

requirements, and on the properties of your network.

• Control toolbar

The live viewer toolbar is available in the web browser page only. It displays the

following buttons:

The Stop button stops the video stream being played.

The Pause button pause the video stream being played.

The Snapshot button takes a snapshot of the current image. The location

where the image is saved can be specified.

The digital zoom activates a zoom-in or zoom-out function for video image

on the live screen.

The Full Screen button causes the video image to fill the entire screen area.

No other windows will be visible. Press the 'Esc' button on the computer

keyboard to cancel full screen view.

The Manual Trigger button activates a pop-up window to manually start or

stop the event.

The Camera Menu button activates a pop-up window for camera menu

control.

Use this scale to control the volume of the speakers.

Use this scale to control the volume of the microphone.

Use this scale to control the volume of the speakers and microphones.

• Camera Menu controls

If the NLD-1401 has been appropriately configured, the Live View page displays

the controls available for the OSD menu.

For more information, please see “3.8 Camera Menu Control” on the User’s

Manual.

• Video and Audio Streams

The camera can provide several images and video stream formats. Your

requirements and the properties of your network will determine the type you

use.

The Live View page in the camera provides access to H.264, MPEG-4 and Motion

JPEG video streams, and to the list of available video streams. Other

applications and clients can also access these video streams/images directly,

without going via the Live View page.

3.5 Setup

This section describes how to configure the NLD-1401, and is intended for

product Administrators, who have unrestricted access to all the Setup tools; and

Operators, who have access to the settings for Basic, Live View, Video & Image,

Audio, Event, and System Configuration.

You can configure the NLD-1401 by clicking Setup in the top right-hand corner

of the Live View page. Click on this page to access the online help that explains

the setup tools.

When accessing the NLD-1401 for the first time, the “Admin Password” dialog

appears. Enter your admin name and password, set by the administrator.

When accessing the NLD-1401 for the first

time, the “Admin Password” dialog

appears. Enter your admin name and

password, set by the administrator.

If the password is lost, the NLD-1401 must

be reset to the factory default settings.

3.6 Resetting to the factory default settings

To reset the NLD-1401 to the original factory settings, go to the Setup>System

>Maintenance web page (described in “3.6.5.6 Maintenance” of the User’s

Manual) or use the control button on the NLD-1401, as described below:

Follow the instructions below to reset the NLD-1401 to the factory default

settings using the Reset Button.

1. Switch off the NLD-1401 by disconnecting the power adapter.

2. Press and hold the Control Button with a straightened paperclip while

reconnecting the power.

3. Keep the Control button pressed until the Status and Power indicator blink.

4. Release the Control Button.

5. When the Power Indicator changes to Green (may take up to 1 minute), the

process is complete and the NLD-1401 has been reset.

6. The NLD-1401 resets to factory defaults and restarts after completing the

factory reset.

CAUTION: When performing a Factory Reset, you will lose any settings you

have saved.

3.7 More Information

For more information, please see the NLD-1401 User’s Manual, which is

available on the CD included in this package.

Indice

Altri manuali Eneo Telecamera di sicurezza

Eneo

Eneo 219547 Manuale utente

Eneo

Eneo IEB-62V2812M0A Manuale utente

Eneo

Eneo IPP-83A0036MIA Manuale utente

Eneo

Eneo TPP-82A0030MIA Manuale utente

Eneo

Eneo TPP-72A0030P0A Manuale utente

Eneo

Eneo ISM-72F0021W0A Istruzioni per l'installazione

Eneo

Eneo PXD-2080MIR D Manuale utente

Eneo

Eneo MPD-62M2812P0A Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

Eneo

Eneo IEP-63M2812M0A Manuale utente

Eneo

Eneo IPD-68M3611P5A Manuale utente

Eneo

Eneo MEM-44F0025M0A Manuale utente

Eneo

Eneo MPD-72M2812M0A Manuale utente

Eneo

Eneo Fastrax III EDC-3222 Manuale utente

Eneo

Eneo ICB-72A0003M0A Manuale utente

Eneo

Eneo VKC-1378/IR-316 Manuale utente

Eneo

Eneo GXB-1720MIR Manuale utente

Eneo

Eneo VK-1322 Manuale utente

Eneo

Eneo DOME-S1 Manuale utente

Eneo

Eneo IPC-55C0000M0A Manuale utente

Eneo

Eneo VKC-1395/12-24 Istruzioni per l'installazione

Eneo

Eneo Fastrax III EDC-3362 Manuale utente

Eneo

Eneo ISM-52F0046MPA Manuale utente

Eneo

Eneo IPP-62A0012M0A Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente