Eneo IAM-5SE1008MUB Manuale utente

EN
DE
Learn more about eneo IN series
on our YouTube channel.
Quick Installation Guide
IAM-5SE1008MUB
Industrial Gigabit Switch,
Managed, 8x PoE, 2x SFP

2

3
EN
TABLE OF CONTENT
SAFETY INSTRUCTIONS �������������������������������������������������������������������������������������������������������� 4
PRIOR TO USE �������������������������������������������������������������������������������������������������������������������������7
Dimensions & Specications�������������������������������������������������������������������������������������������������������������������������������������������������7
Parts supplied�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
APPEARANCE �������������������������������������������������������������������������������������������������������������������������8
Back������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������8
Side�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������8
CAUTION ���������������������������������������������������������������������������������������������������������������������������������9
INSTALLATION����������������������������������������������������������������������������������������������������������������������10

4
SAFETY INSTRUCTIONS
Mounting & Installation
Power supply & wiring
Read the safety instructions and the operating instructions carefully before installing the
product� Depending on the product type, individual points may be omitted�
• Ensure that the intended mounting location is suitable for the respective product (e�g� in terms of
weight)�
• Securely fasten the products to the locations and surfaces recommended by the manufacturer to
ensure stability and safety�
• Ensure that the products are weatherproof when installed outdoors, e�g� protect cameras from
direct sunlight or extreme temperatures�
• Make sure that any ventilation slots are not blocked to ensure sucient air circulation and cooling�
• Make sure that cameras, switches, etc� are installed with sucient safety distance to ammable
materials, power sources, running water, etc�
• Assembly, commissioning and maintenance may only be carried out by authorized specialist
personnel in compliance with the relevant standards and guidelines�
• To ensure a safe power supply, use only power supplies and cables recommended by the
manufacturer�
• Make sure that the cables are properly routed and protected from tampering and damage (e�g�
kinking) to avoid power failures or short circuits (e�g� due to moisture ingress)�
• Make sure that the cables are not routed through doors, windows or other moving parts to
avoid damage and tripping hazards�
• To disconnect the system from the power supply, pull the cable only by the plug and never
directly by the cable�
• When shortening exible connection cables, use wire end ferrules�

5
EN
Operation
• The devices may only be operated within the temperature and humidity ranges specied in the
data sheet�
• Sucient ventilation must be provided to prevent overheating� This applies in particular to
devices such as recorders and switches that can generate heat�
• Ensure that no sight lines are blocked and that accessories do not obscure areas used by other
equipment or people�
• Ensure cameras are oriented to provide a clear view of the desired area without interfering with
people’s privacy�
Security
Cleaning & Maintenance
Warnings, Privacy & Legal Notices
• Use strong passwords for all cameras and devices to prevent unauthorized access�
• Keep device rmware up to date to minimize security vulnerabilities�
• Protect (remote) access to the devices using secure methods such as encrypted connections or VPN�
• Clean the lenses and housings of the cameras regularly to ensure a clear view�
• Keep the ventilation slots clean and free of dust to ensure ecient cooling�
• Use a mild detergent for cleaning� Harsh cleaning agents such as thinner or benzine may
permanently damage the surface�
• Check the product regularly for damage and signs of wear�
• Only use original spare parts (e�g� connection cable) or accessories from VIDEOR E� Hartig GmbH�
• Any tampering by unauthorized persons will void the warranty�
• Before opening the housing, disconnect the power supply�
• Draw the attention of visitors to the fact that they are being recorded by means of clearly visible
notices�
• If necessary, point out rules of conduct�
• Ensure that cameras are oriented in such a way that privacy is not violated, e�g�, by recording
neighbors or public areas�
• Comply with local laws and regulations on video surveillance and data protection (GDPR)�

6
WEEE (Waste Electronical & Electronic Equipment)
Correct Disposal of This Product (Applicable in the European Union and other European countries with separate
collection systems)�
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life� To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources� Household users
should contact either the retailer where they purchased this product, or their local government oce,
for details of where and how they can take this item for environmentally safe recycling� Business users
should contact their supplier and check the terms and conditions of the purchase contract� This prod-
uct should not be mixed with other commercial wastes for disposal�
Graphical Symbols
Please pay attention to the safety instructions, and carefully read through this instruction guide before initial operation�
Important points of warning are marked with a caution symbol�
Important points of advice are marked with a notice symbol�

7
EN
PRIOR TO USE
• The equipment is intended to be grounded to comply with emission and immunity
requirements� Ensure that the switch functional ground screw is connected to earth
ground during normal use�
Dimensions & Specications
Construction:
Metal shell
Dimensions(mm):
163,00 x 110,50 x 46,50
Gewicht:
575,00 g (1�27 lb)
Parts supplied
Switch (incl. power cable) QIG

8
APPEARANCE
Back
SFP Indicator
CCTV Indicator Gigabit SFP Port 100M Ethernet Ports
Gigabit Ethernet Port
Power Indicator
Side
Grounding Power Input DIP Switch

9
EN
CAUTION
• Do not switch on the system until you have made sure that the wiring is correct to avoid
damage to the unit� It is recommended to use the supplied power supply and power cord
to connect the power supply�
• For better transmission performance, it is recommended to use a category 5 or higher
Ethernet cable for the connection between the switch and the connected devices�
• For better protection performance, it is recommended to always connect the earth rst
and disconnect it at the end when the unit is put into operation�
• Before operating or servicing the switch, please read the operating instructions carefully
to avoid damage to the unit due to incorrect operation�
The switches support 2 working modes through DIP switch�
Mode Description
Default Default mode: disable CCTV function�
CCTV
CCTV mode: the transmission distance is extended up to 250m, but the rate is
limited to 10Mbps� This mode supports VLAN (all downlink ports are isolated from
each other, but can communicate with uplink ports) and restrain network storm, PoE
switch supports PoE watchdog�
DIP Switch
Indicator Status Description
Power Power supply Indicator Solid on Power supply is on�
O Power supply is o�
Fiber Link SFP port link Indicator
On SFP is linking normally�
Blink SFP is transmitting or receiving data
O SFP is linking down�
CCTV CCTV Indicator On CCTV mode is on�
O CCTV mode is o�
LED Indicators

10
INSTALLATION
1� Switch o the unit before installation� Installation with the power on is
prohibited�
2� The switch supports DIN rail/desktop/wall mounting� Follow the DIN rail
installation steps:
Step 1: Fix the bracket to the backside of the
device with screws
Step 2: Install the device to the DIN rail
3� After completing the above steps, connect the switch and other devices using a
high-capacity Ethernet cable�
4� Check the installation and wiring� After conrming that the connection is correct
and reliable, turn on the switch�
5� The installation is complete�
Indice
Lingue:
Altri manuali Eneo Interruttore

Eneo
Eneo IAM-5SE1004MUC Manuale utente

Eneo
Eneo DS-4 Manuale utente

Eneo
Eneo IAD-5SG1004MUC Manuale utente

Eneo
Eneo IAM-5SE1004MUB Manuale utente

Eneo
Eneo IAR-7SE2024MMA Manuale utente

Eneo
Eneo 221890 Manuale utente

Eneo
Eneo IAR-7SE2016MMA Manuale utente

Eneo
Eneo IAR-7SE1024MMC Manuale utente

Eneo
Eneo IAR-7SH1024MMA Manuale utente

Eneo
Eneo IAR-7SE2024MMA Manuale utente






















