Enerzone Destination 2.3 Manuale utente

45925A

Printed in Canada 2022-10-06

INSTALLATION

AND OPERATION

MANUAL

Destination 2.3

Insert

(EB00044 model)

US ENVIRONMENTAL

PROTECTION AGENCY PHASE II

CERTIFIED WOOD

INSERT COMPLIANT WITH 2020

CORD WOOD STANDARD

Safety tested according to ULC S628,

UL 737 and UL 1482 Standards

by an accredited laboratory

www.enerzone-intl.com

Stove Builder International Inc.

250, rue de Copenhague, St-Augustin-de-Desmaures

(Quebec) Canada G3A 2H3

After-sale service: 1-877-356-6663 E-mail: tech@sbi-international.com

READ AND KEEP THIS MANUAL FOR REFERENCE

This manual is available for free download on the manufacturer’s web site. It is a copyrighted

document. Re-sale is strictly prohibited. The manufacturer may update this manual from

time to time and cannot be responsible for problems, injuries, or damages arising out of the

use of information contained in any manual obtained from unauthorized sources.

2Destination 2.3 Insert Installation and Operation Manual

THANK YOU FOR CHOOSING THIS ENERZONE WOOD INSERT

As one of North America’s largest and most respected wood stove and fireplace manufacturers,

Stove Builder International takes pride in the quality and performance of all its products. We want to

help you get maximum satisfaction as you use this product.

In the pages that follow you will find general advice on wood heating, detailed instructions for safe

and effective installation, and guidance on how to get the best performance from this insert as you

build and maintain fires, and maintain your wood heating system.

It is highly recommend that this wood burning hearth product be installed and serviced by

professionals who are certified by a «Qualified Agency» such as NFI (National Fireplace Institute®)

or CSIA (Chimney Safety Institute of America) in the United States and in Canada by WETT (Wood

Energy Technology Transfer) or in Quebec by APC (Association des Professionnels du Chauffage).

Congratulations on making such a wise purchase.

If this insert is not properly installed, combustible materials near it may overheat. To reduce

the risk of fire, follow the installation instructions in this manual exactly. Contact local

building or fire officials about restrictions and installation inspection requirements in your

area.

Please read this entire manual before you install and use your new insert. You may need to

get a building permit for the installation of this insert and the chimney that it is connected to.

Consult your municipal building department or fire department before installation. We

recommend that you also inform your home insurance company to find out if the installation

will affect your policy.

This heating unit is designed to serve as a supplementary heat source. We recommend that

a primary heat source also be available in the home. The manufacturer cannot be responsible

for costs associated with the use of another heating system.

To receive full warranty coverage, you will need to show evidence of

the date you purchased your insert. Keep your sales invoice. We also

recommend that you register your warranty online at:

https://www.enerzone-intl.com/en/warranty/warranty-registration/

Registering your warranty online will help us to quickly track the

information we need about your insert.

Destination 2.3 Insert Installation and Operation Manual 3

Table of content

PART A - OPERATION AND MAINTENANCE ...............................7

1Safety Information .....................................................................7

2General Information...................................................................8

2.1 Performances(1) .................................................................................................................8

2.2 Specifications....................................................................................................................9

2.3 Dimensions .....................................................................................................................10

2.4 EPA Certification Loading ...............................................................................................11

2.5 Zone Heating and How to Make it Work for You..............................................................12

2.6 The Benefits of Low Emissions and High Efficiency ........................................................12

2.7 The SBI Commitment to You and the Environment .........................................................13

2.7.1 What is Your New Insert Made Of?..............................................................................13

3Fuel ...........................................................................................13

3.1 How to Prepare or Buy Good Firewood...........................................................................14

3.1.1 What is Good Firewood? .............................................................................................14

3.1.2 Tree Species ...............................................................................................................14

3.1.3 Log Length ..................................................................................................................15

3.1.4 Piece Size ...................................................................................................................15

3.1.5 How to Dry Firewood ...................................................................................................15

3.1.6 Judging Firewood Moisture Content ............................................................................16

3.2 Manufactured Logs .........................................................................................................16

4Operating the Insert.................................................................16

4.1 Before Operating the Insert .............................................................................................16

4.2 The Use of a Fire Screen. ...............................................................................................17

4.3 Blower Operation ............................................................................................................17

5Burning Wood Efficiently........................................................18

5.1 The First Fires .................................................................................................................18

5.2 Lighting Fires ..................................................................................................................18

5.2.1 Conventional Method...................................................................................................19

5.2.2 The Top Down Method ................................................................................................19

5.2.3 Two Parallel Logs Method ...........................................................................................19

5.2.4 Using Fire Starters.......................................................................................................19

5.3 Maintaining Wood Fires...................................................................................................20

5.3.1 General Advice ............................................................................................................20

5.3.2 Ash Removal ...............................................................................................................20

5.3.3 Raking Charcoal ..........................................................................................................21

5.3.4 Firing Each New Load Hot ...........................................................................................21

5.3.5 Controlling the Air Intake..............................................................................................21

4Destination 2.3 Insert Installation and Operation Manual

5.4 Fires Types .....................................................................................................................22

5.4.1 Small Fires to Take the Chill Off the House .................................................................22

5.4.2 Long Lasting Low Output Fires ....................................................................................22

5.4.3 High Output Fires for Cold Weather.............................................................................22

5.4.4 Maximum Burn Cycle Times ........................................................................................22

5.4.5 Logs Orientation ..........................................................................................................23

6Maintaining Your Wood Heating System...............................24

6.1 Insert Maintenance..........................................................................................................24

6.1.1 Cleaning Door Glass....................................................................................................24

6.1.2 Door adjustment ..........................................................................................................25

6.1.3 Replacing the Door Gasket..........................................................................................25

6.1.4 Replacing the Glass or the Glass Gasket ....................................................................26

6.1.5 Cleaning and Painting the Insert ..................................................................................26

6.1.6 Firebricks.....................................................................................................................27

6.2 Chimney and Chimney Liner Maintenance......................................................................27

6.2.1 Why Chimney Cleaning is Necessary? ........................................................................27

6.2.2 How Often Should You Clean the Chimney? ...............................................................27

6.2.3 Cleaning the Chimney .................................................................................................27

PART B - INSTALLATION.............................................................28

7Masonry Fireplace Requirements ..........................................28

8Safety Information and Standards .........................................29

8.1 Regulations Covering Insert Installation ..........................................................................29

9Clearances to Combustible Material......................................30

9.1 Certification Label ...........................................................................................................30

9.2 Masonry fireplace throat damper.....................................................................................30

9.3 Installation of a Combustible Mantel Shelf.......................................................................31

9.4 Floor Protection...............................................................................................................31

9.4.1 Installation Raised of 5" and Less................................................................................32

9.4.2 Installation Raised of More than 5" ..............................................................................33

9.4.3 R Value........................................................................................................................33

9.5 Minimum Masonry Opening, Clearances to Combustibles ..............................................35

10 The Venting System ................................................................36

10.1 General ...........................................................................................................................36

10.2 Block-Off Plate ................................................................................................................36

10.3 Suitable Chimneys ..........................................................................................................37

10.4 Liner installation ..............................................................................................................37

10.5 Liner Connection .............................................................................................................38

10.5.1 Liner Starter Adaptor ...................................................................................................38

10.5.2 Liner Offset Adaptor.....................................................................................................39

Destination 2.3 Insert Installation and Operation Manual 5

10.6 Minimum Chimney Height ...............................................................................................39

10.7 Chimney Location ...........................................................................................................40

10.8 Supply of Combustion Air................................................................................................40

Appendix 1: Installing the Optional Fresh Air Intake Kit ..........42

Appendix 2: Installing the Faceplate ..........................................43

Appendix 3: Blower Replacement...............................................45

Appendix 4: Installing the Optional Fire Screen........................47

Appendix 5: Log retainers installation .......................................48

Appendix 6: Installation of Secondary Air Tubes and Baffle ...49

Appendix 7: Removal instructions..............................................51

Appendix 8: Exploded Diagram and Parts List..........................52

ENERZONE LIMITED LIFETIME WARRANTY .. Erreur ! Signet non

défini.

Dealer: _______________________________________________

Installer: ______________________________________________

Phone number: ________________________________________

SERIAL NUMBER: _______________

6Destination 2.3 Insert Installation and Operation Manual

CERTIFICATION PLATE

Destination 2.3 Insert Installation and Operation Manual 7

PART A - OPERATION AND MAINTENANCE

Please see Part B for installation instructions.

1 Safety Information

•Operate only with door fully closed or fully open with fire screen in place. If door is left

partly open, gas and flame may be drawn out of the opening, creating risks from both fire

and smoke.

•HOT WHILE IN OPERATION, KEEP CHILDREN, CLOTHING AND FURNITURE

AWAY. CONTACT MAY CAUSE SKIN BURNS. GLOVES MAY BE NEEDED FOR

INSERT OPERATION.

•Using an insert with cracked or broken components, such as glass or firebricks or baffles

may produce an unsafe condition and may damage the insert.

•Open the air control fully before opening the loading door.

•This insert has been tested for use with an open door in conjunction with a fire screen

(ac01315, sold separately). The door may be open or fire screen removed only during

lighting procedures or reloading. Always close the door or put back the fire screen after

ignition. Do not leave the insert unattended when the door is opened with or without fire

screen.

•NEVER USE GASOLINE, LANTERN FUEL (NAPHTHA), FUEL OIL, MOTOR OIL,

KEROSENE, CHARCOAL LIGHTER FLUID, OR SIMILAR LIQUIDS OR AEROSOLS

TO START A FIRE IN THIS INSERT. KEEP ALL SUCH LIQUIDS OR AEROSOLS

WELL AWAY FROM THE INSERT WHILE IT IS IN USE.

•Do not store fuel within heater minimum installation clearances.

•Burn only seasoned natural firewood.

•This wood heater needs periodic inspection and repair for proper operation. It is against

federal regulations to operate this wood heater in a manner inconsistent with operating

instructions in this manual

•This appliance should always be maintained and operated in accordance with these

instructions.

•Do not elevate the fire by means of grates, and irons or other means.

•A smoke detector, a carbon monoxide detector and a fire extinguisher should be installed

in the house. The location of the fire extinguisher should be known by all family members.

This product can expose you to chemicals including carbon monoxide,

which is known to the State of California to cause cancer, birth defects or

other reproductive harm. For more information go to

http://www.P65warnings.ca.gov

8Destination 2.3 Insert Installation and Operation Manual

2 General Information

2.1 Performances(1)

Model Destination 2.3 (EB00044)

Fuel type Dry cordwood

Recommended heating area[*] 500 to 2,100 ft2(47 to 195 m2)

Overall firebox volume(2) 2.4 ft3(0.068 m3)

EPA loading volume 1.95 ft3(0.055 m3)

Maximum burn time[*] 8 hours

Maximum heat output (dry cordwood)(3) 75,000 BTU/h (22.0 kW)

Overall heat output rate (min. to max.)(3)(4) 14,200 BTU/h to 44,500 BTU/h

(4.16 kW to 13.04 kW)

Average overall efficiency(4) - Dry cordwood 72% (HHV)577% (HHV)5

Optimum overall efficiency(3)(7) 79%

Optimum heat transfer efficiency(8) 76%

Average particulate emissions rate(9) 2.3 g/h (EPA / CSA B415.1-10)(10)

Average CO(11) 69 g/h

[*] Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss

factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the

manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a

power failure.

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn

time and maximum heat output.

(2) The overall firebox calculation is an approximation and is not intended to be used for loading. This volume includes a

buffer zone to allow an easier fuel insertion, prevent ash spillage and allow the air wash to work properly.

(3) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft3and 20 lb/ft3.

Other performances are based on a fuel load prescribed by the standard. The specified loading density varies

between 7 lb/ft³ and 12 lb/ft

. The moisture content is between 19% and 25%.

(4) As measured per CSA B415.1-10 stack loss method.

(5) Higher Heating Value of the fuel.

(6) Lower Heating Value of the fuel.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) The optimum heat transfer efficiency is for the low burn rate and represents the appliance's ability to convert the

energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into

account the chemical losses during combustion.

(9) This appliance is officially tested and certified by an independent agency.

(10)Tested and certified in compliance with CFR 40 part 60, subpart AAA, section 60.534(a)(1(ii) and ASTM E3053-17.

Based on ALT-125 sent by EPA on February 28th, 2018.

(11) Carbon monoxide.

Destination 2.3 Insert Installation and Operation Manual 9

2.2 Specifications

Recommended log length 16 in (406 mm) east-west

Maximum log length 20 in (508 mm) east-west*

Flue outlet diameter 6 in (150 mm)

Recommended connector pipe diameter 6 in (150 mm)

Type of chimney ULC-S635, CAN/ULC-S640, UL 1777

Minimum chimney height 12 feet

Baffle material C-Cast or equivalent

Approved for alcove installation Not approved

Approved for mobile home installation‡Not approved

Shipping weight (without option) 478 lb (217 kg)

Appliance weight (without option) 422 lb (191 kg)

Type of door Single, glass with cast iron frame

Type of glass Ceramic glass

Blower Included (up to 90 CFM)

Particulate emission standard EPA / CSA B415.1-103

USA standard (safety) UL 1482, UL 737

Canadian standard (safety) ULC S628

** East-west: through the door you see the longitudinal sides of the logs; north-south: through the door you see the tips of the

logs.

‡Mobile home (Canada) or manufactured home (USA): The US department of Housing and Urban Development describes

“manufactured homes” better known as “mobile homes” as followed; buildings built on fixed wheels and those transported

on temporary wheels/axles and set on a permanent foundation. In Canada, a mobile home is a dwelling for which the

manufacture and assembly of each component is completed or substantially completed prior to being moved to a site for

installation on a foundation and connection to service facilities and which conforms to the CAN/CSA-Z240 MH standard

3Tested and certified in compliance with CFR 40 part 60, subpart AAA, section 60.534(a)(1(ii) and ASTM E3053-17. Based on

ALT-125 sent by EPA on February 28th, 2018.

10 Destination 2.3 Insert Installation and Operation Manual

2.3 Dimensions

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Enerzone Camino da interno

Enerzone

Enerzone SOLUTION 1.7-I Manuale utente

Enerzone

Enerzone Solution 2.5-ZC Manuale utente

Enerzone

Enerzone Destination 2.3 Insert Manuale utente

Enerzone

Enerzone DESTINATION 2.7 Manuale utente

Enerzone

Enerzone Destination 1.5 Insert Manuale utente

Enerzone

Enerzone Destination 1.5 Manuale utente

Enerzone

Enerzone SOLUTION 3.5 INSERT Manuale utente

Enerzone

Enerzone DESTINATION 1.9 Manuale utente

Enerzone

Enerzone Solution 2.0 Manuale utente

Enerzone

Enerzone Solution 2.5-ZC Manuale utente

Enerzone

Enerzone BIO-35 Manuale utente

Enerzone

Enerzone EB00005 Manuale utente

Enerzone

Enerzone Solution 1.8-I Manuale utente

Enerzone

Enerzone SOLUTION 2.5ZC II Manuale utente

Manuali Camino da interno popolari di altre marche

Brigantia

Brigantia 35-DVRS31N-2 Manuale del proprietario

Nordpeis

Nordpeis Bergen Manuale utente

Superior

Superior BCT2536TMN Manuale utente

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuale utente

Renaissance

Renaissance RUMFORD 1000 Manuale utente

Lacunza

Lacunza IV-800 Manuale utente

Baxi

Baxi 940 Istruzioni per l’uso

Dru

Dru Maestro 60/2 Tall RCH Manuale utente

Diamond Fireglass

Diamond Fireglass SS-O22 Manuale utente

HearthStone

HearthStone Windsor Bay 8830 Manuale di programmazione

Napoleon

Napoleon ASCENT B42 Manuale utente

Enviro

Enviro E33GI Manuale utente

Smeg

Smeg L30 FABE Istruzioni di montaggio

KEDDY

KEDDY K700 Manuale utente

Godin

Godin 3451 Manuale utente

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuale utente

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuale utente

Desa

Desa CCFPDFT Manuale operativo