ENFORCER 30 Manuale utente

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Operation and Maintenance Manual

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Table of Contents

Chapter 1 Page

-Product Introduction 3

-Product Warranty 3-4

-Safe Operating Procedures 4-5

Chapter 2 Page

-System Description 6

-System Specifications 6

Chapter 3 Page

-Operating Instructions 7-9

-Recommended Foam 7

-Preventative Maintenance Checks and Services 7-8

Chapter 4 Page

-Training 10

Chapter 5 Page

-Maintenance 11

-Servicing and Maintenance Activities 12-16

-Troubleshooting 16-17

Chapter 6 Page

-Pictures 18-20

Chapter 1

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

CAUTION: User should read and follow all Safety Rules and

Operating Instructions BEFORE first use of this product!

Introduction

1-1. Manufacturer

a. The Enforcer 30 is Manufactured by:

Enforcer One, LLC

473 Dividend Drive B

Peachtree City, GA 30269

United States of America

Phone: (678) 788-8413

Fax: (6787) 788-8415

E-mail: [email protected]

Website: www.enforcerone.com

b. EnforcerOne is committed to the satisfaction of our owners and operators of the

Enforcer 30. If you have any problems, questions, or concerns please contact

EnforcerOne via phone, Fax, or E-mail.

1-2. Warranty

Limited Warranty

Enforcer One, LLC warrants to the original owner-user that Enforcer One, LLC products will be

free from failures due to defects in workmanship for a period of one year from the date of

original purchase. During the warranty period, Enforcer One, LLC, at its sole discretion, will

repair or replace at no charge, the product that, in its sole opinion, is defective.

The purchaser is responsible for packing the product for shipment and for charges to ship the

product to the location specified by Enforcer One, LLC, including, at the purchasers sole

discretion, insurance on the shipment. Enforcer One, LLC will return the product pre-paid to

the purchaser.

If the product has been altered, modified or repaired in any way, or if the failure is the result of

misuse, abuse or misapplication without the prior consent of Enforcer One, LLC, this warranty

shall be void and Enforcer One, LLC shall have no obligation to repair or replace the failed

product.

The use of any foam product other than a FIREBULL® Fluorine Free Foam product will void the

warranty.

Warranty –continued

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

CAUTION: The unpredictable nature of fires, the techniques used to apply

product(s) as well as the knowledge-understanding and judgment of the

individual(s) attempting to extinguish or control them will affect the performance

of Enforcer One, LLC product(s).

CAUTION: Prior to attempting to operate this or any Enforcer One, LLC product, you

MUST read and understand all directions and instructions in this user manual. Until

you have read and understand all CAUTIONS; Warnings, Requirements, Instructions

for Set-up & Testing - Operation and Maintenance: NO ATTEMPT should be made to

operate this or any Enforcer One, LLC product. In order to assure that your Enforcer

One, LLC product(s) are ready when needed, they must be regularly maintained as

outlined. FAILURE TO COMPLY WITH ALL CAUTIONS, WARNINGS, REQUIREMENTS,

INSTRUCTIONS, PROCEDURES AND MAINTENANCE WILL VOID THIS WARRANTY &

MAY RESULT IN SERIOUS INJURY OR DEATH &/OR DAMAGE TO OR LOSS OF

PROPERTY.

When used in conjunction with sound fire management practices and strictly as per the

manufacturer’s instructions, the products may provide protection against anticipated fires and

may accelerate the extinguishing of existing fires.

THIS WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY FOR ENFORCER ONE, LLC

PRODUCT(S) AND DISCLAIMS AND EXCLUDES ANY AND ALL IMPLIED WARRANTIES REGARDING

THE PRODUCT(S) INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

No person or entity is authorized to bind Enforcer One, LLC to any other warranty obligation or

liability to distributer, purchaser or any third party for any loss of profits, economic loss,

indirect, incidental, punitive, special or consequential damages whatsoever and howsoever

caused. Operation or use of this or any Enforcer One, LLC product for which this warranty is

issued shall constitute acceptance of the terms hereof.

SAFE OPERATING REQUIREMENTS

1. DO NOT attempt to use this or any Enforcer One, LLC product(s) if they appear damaged

and/or broken. Missing or damaged components MUST be properly repaired or replaced as

soon as possible.

Safe Operating Requirements –continued

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

2. DO NOT attempt to use this or any Enforcer One, LLC product(s) if you are tired, injured or

under the influence of drugs, medication or alcohol.

3. DO keep children and bystanders away from the area where Enforcer One, LLC product(s)

are in-use.

4. DO NOT attempt to use this or any Enforcer One, LLC product(s) in the event that the fire

represents a situation that is beyond the capabilities of the Operator and/or the Equipment.

5. DO follow the proper Set-up, Testing, and Maintenance & Inspection Procedures to assure

that your Enforcer One, LLC product(s) is/are ready for use when needed.

6. DO exit the area IMMEDIATELY if progress in fighting the fire is not being made and DO NOT

return to the area.

7. DO comply with all local Laws & Regulations related to the proper use, installation,

maintenance, training and inspection of Fire-Fighting Equipment.

WARNING: The act of fighting fire is both hot and dangerous work. Smoke, heat,

unseen fumes/gases and flames can be easily underestimated. In the absence of the

proper training, protective gear and clothing, extreme caution should be exercised to

avoid serious injury or death. If ever, in an attempt to extinguish a fire, you are

unsure that progress is being made, contain the fire (if possible) and move quickly and

safely away from the threat.

1-3. Manual Changes

1. EnforcerOne will provide equipment update changes to this manual on an as

need basis.

2. This manual and associated updates will be posted on the EnforcerOne web site.

3. This manual supersedes all previous Operating Instructions for the Enforcer 30

system.

ADDITIONAL INFORMATION

http://www/usfa.fema.gov/safety/sheets.htm

http://www.nfpa.org/education/index.html

http://www.ilpi.com/safety/extinguishers.html

http://www.Enforcer One, LLC.com

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Chapter 2

System Description

2-1. General Information

The Enforcer 30 Compressed Air Foam System utilizes compressed air to propel

firefighting foam. Enforcer 30 produces air aspirated foam providing a thick vapor

sealing blanket that will inhibit re-ignition. The Enforcer 30 will produce up to 300

gallons of finished foam with discharge duration of up to 2 ½ minutes. The system can

be easily recharged by the end user.

2-2. Model Configuration

The Enforcer 30 consists of a Premix Tank which holds 30 gallons of pre-mixed

FIREBULL® Fluorine Free Foam. Two compressed air cylinders are attached to the

Premix Tank through a regulator and hose assembly. One 50’ section of lay flat hose and

one pistol grip style Nozzle.

2-3. Specifications

-Height: 38.5 “(97.79 cm) Length: 54.5”(138.34 cm) Depth: 42”(106.68 cm.)

-Empty Weight: 495 lbs. (224.5 kg) Loaded Weight: 995lbs. (451.3 kg)

-Premix Tank: 30 US Gallons (227 l)

-Finished Foam Capacity: 1200 US Gallons (6814 l)

-Foam Discharge Distance: Up to 95 Feet ( 29 m)

-Air Cylinders: 90 cu. ft. 2200 psi (151.6 bar)

-Recharge Time: 3-5 minutes

2-4. Transporting

The Enforcer 30 should be secured when transporting in trailers or vehicles.

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Chapter 3

Operating Instructions

3-1. Initial Setup

The Enforcer 30 comes fully assembled. The 30 gallon Premix Tank and Compressed Air

Cylinder must be filled prior to use. The proper FIREBULL® Fluorine Free Foam product

should be selected based on operational ambient temperatures and type of anticipated

fires before putting the unit into service.

3-2. FIREBULL®Fluorine Free Foam Products

a. Enforcer 3 Backpack should only be used with FIREBULL® Fluorine Free Foam

products mixed at a 1%, 3% or 6% solution for low, medium and high expansion.

b. It is recommended that a FIREBULL® Freeze Protected Fluorine Free Foam Product

be used when positioning the unit outside during extended subfreezing weather.

3-3. System Depressurization

Ensure the system is depressurized before conducting maintenance

a. Close the Air Cylinder Valves.

b. Open nozzle until all air is deployed and working pressure gauge reads zero or open

Pressure Relief Valve.

3-4. Preventative Maintenance Checks & Services (PMCS)

a. It is recommended that the PMCS CHECKLIST be completed every month.

b. Personnel conducting the PMCS should be thoroughly familiar with the Enforcer 30

system and the information contained in this manual.

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Form E3PMCS

Preventative Maintenance Checks and Services (PMCS)

Checklist

Date Completed

Name Signature

1. Conduct a visual inspection of the system for chaffing or loose hose(s), dirt,

corrosion or damage.

2. Check the Air Cylinder for normal operating pressure (1800-2200 psi).

a. Ensure System is depressurized.

b. Disconnect Air Cylinders and pull out of unit.

c. Connect Air Cylinder Pressure Check Gauge.

d. Open Air Cylinder and check for normal operating pressure. (1800-

2200psi)

e. Close Air Cylinder and slowly disconnect Pressure Check Gauge allowing

for pressure bleed off.

f. If the Air Cylinder pressure is below 1500 psi remove, recharge and

replace the Air Cylinder.

The Air Cylinder should normally be left in the closed position.

______ 3. Check the Premix Tank Level

a. Disconnect fill tower Cap check liquid level.

b. Fill up the Premix Tank if low.

_______ 4. Check the tire condition.

Note any other Problems:

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

3-5. Operating Instructions

Warning

Always refer to the product MSDS for proper precautions and treatment(s) if foam is

accidently ingested or sprayed in eyes, mouth or nose

a. Extend hose ensure the Nozzle and the Foam Discharge Valve are in the closed

position.

b. Charge the system by turning one of the Air Cylinder Valves counter clockwise.

c. Open the Foam Discharge Valve slowly to the full open position.

d. Grasp the nozzle with hand.

e. Aim the nozzle at the base of the fire and open valve to discharge foam.

3-6. Cold Weather Operations

a. It is recommended that a FIREBULL® Fluorine Free Foam Pre-Mix product is used

when freezing is anticipated.

3-7. Emergency Procedures

a. Loose Hose

1. Go to the unit and close the Foam Discharge Valve.

2. Go to the Nozzle and close the valve.

b. No Foam Discharge

1. Check to see if Air Cylinder is full.

2. Verify the Air Cylinder Valve is turned completely on.

3. Ensure Air Pressure Hose is attached properly.

4. Check for obstruction in discharge hose.

c. Shut Down Procedures

1. Close the Nozzle Valve.

2. Close the Air Cylinder Valve.

3. Open Nozzle valve to depressurize the system or open Pressure Relief Valve.

4. Secure discharge hose.

Enforcer One, LLC FIREBULL®is a registered trademark of Enforcer One, LLC

Chapter 4

Training

4-1. Training Program

a. Training on the Enforcer 30 should be conducted or reviewed annually for all

operators

b. Maintenance personnel should complete initial training and refresher training as

required

c. Trainers should be thoroughly familiar with the system, fire behavior, hazard

identification, and basic firefighting techniques

d. Operator training should be accomplished in live fire scenarios. Live fire training can

often be accomplished through coordination with a local fire department.

4-2. Training Program of Instructions

a. Operators and Maintenance Personnel

1. PMCS

2. Normal and Cold Weather Operating Instructions

3. Emergency Procedures

4. Operation in live fire scenario

b. Maintenance Personnel

1. General Maintenance

2. Instructions and Technical Assistance

3. Foam Product

4. Maintenance Log

5. Servicing Under Normal and Cold Conditions

6. Scheduled Maintenance

7. Unscheduled Maintenance

8. Troubleshooting Procedures

9. Storage and Protection

Altri manuali per 30

Indice

Altri manuali ENFORCER Attrezzature antincendio

ENFORCER

ENFORCER 30 Manuale utente

Manuali Attrezzature antincendio popolari di altre marche

Tyco Fire Protection Products

Tyco Fire Protection Products AM31 AQUAMIST Nozzle Manuale utente

Task Force Tips

Task Force Tips Extend-A-Gun RC3 Manuale del proprietario

Autronica

Autronica AutroSafe BSD-321/EX Manuale utente

POK

POK Froggy Manuale utente

Waterous

Waterous AQUIS Series Manuale

CTP

CTP NPO ETERNIS GUARANT-7 Manuale elenco delle parti

MSA

MSA M1 Manuale utente

Grundfos

Grundfos Hydro EN Manuale operativo

Amerex

Amerex 570 Guida all'applicazione

Vimpex

Vimpex BIG HP18-H200-B1 Manuale utente

Global Fire Equipment

Global Fire Equipment GFE-PA-VOX-A Manuale utente

Chubb

Chubb PEFS F3 Manuale utente

Projoy Electric

Projoy Electric PEFS-PL Series Manuale utente

klimaoprema

klimaoprema FDC25 Series Manuale utente

Tyco

Tyco 802SB Manuale utente

Mueller

Mueller Revive M2 Manuale utente

SEI Industries

SEI Industries BAMBI MAX BBXHL4000PF Manuale utente

Waterax

Waterax MARK-3 Manuale utente