High-Temperature Laser Infrared Thermometer ennoLogic eT1600S
6
d F or AVG, the small numeric display in the bottom right
corner will also update. See MODE Functions for more
detail. When you release the trigger button, the last
reading will remain on the display. The SCAN icon will
change to HOLD.
Switching Temperature Units
To switch between °F and °C, press and hold the red
MODE button until you hear a beep.
Auto Shut Off and Lock
After approximately 7 seconds of non-use the thermometer
will automatically turn off, unless the lock feature has been
enabled. To enable the lock feature, press and hold the
Laser/Backlight button until you hear a beep. To disable it,
press and hold the red MODE button until SCAN changes
to HOLD. The Lock feature can be used if hands-free
operation for long periods of time is desired.
Laser Pointer and Backlight
To turn the laser pointer and backlight on and off, first
press and release the trigger button to turn the
thermometer on. Then press the Laser/Backlight button to
cycle through combinations of laser and backlight settings:
1. Laser OFF, backlight OFF, 2. Laser OFF, backlight ON, 3.
Laser ON, backlight OFF, 4. Laser ON, backlight ON.
When the laser is enabled, the icon appears on the
LCD display. The last laser/backlight setting chosen will be
