Entron EN7000-TS Manuale utente
EN7000-TS
Touch-screen
User Guide
This document demonstrates the use of the EN7000 touchscreen.
Please reference the EN7000 User Guide for further details of
parameters.
For firmware Versions 1.18 and 2.18
EN7000-TS touch-screen User Guide
1
Document change record
Issue Date Comment
1.12 27/8/19 Toroid test added.
1.13 11/9/19 Added C-Monitor.
1.14 16/12/19 Added Analog control.
1.15 11/03/20 Added Toroid factor parameter. Added Retry feature
1.16 20/7/20 Added 0V parameter to CCR calibration for analog control mode
1.18 14/9/20 Changed description of 2
nd
-stage once/every configuration parameter
EN7000-TS touch-screen User Guide
2
Table of Contents
Section Page
1. How to use the touch-screen....................................................................................... 5
1.1. Start-up.................................................................................................................... 5
1.2. Menu screen........................................................................................................... 6
1.3. Status screen........................................................................................................... 7
2. Editing parameters........................................................................................................ 8
2.1. Numeric................................................................................................................... 8
2.2. Radio button........................................................................................................... 9
2.3. Multi-option............................................................................................................. 9
2.4. Check box............................................................................................................... 9
3. Menus ........................................................................................................................... 10
3.1. Use Program (parameter)................................................................................... 11
3.2. Program menu...................................................................................................... 11
3.2.1. Program (parameter)................................................................................... 11
3.2.2. Link to program (parameter)....................................................................... 11
3.2.3. Electrode (parameter)................................................................................. 11
3.2.4. Timing menu .................................................................................................. 12
3.2.5. Current menu ................................................................................................ 14
3.2.6. Force menu.................................................................................................... 16
3.2.7. Valves menu.................................................................................................. 18
3.2.8. Options menu................................................................................................ 20
3.2.9. Copy program............................................................................................... 21
3.2.10. START button.................................................................................................. 21
3.3. Electrode menu.................................................................................................... 22
3.3.1. Edit Electrode (parameter).......................................................................... 22
3.3.2. SCR/Transformer (parameter)...................................................................... 22
3.3.3. Counter menu............................................................................................... 23
3.3.4. Stepper menu................................................................................................ 24
3.3.5. Current calibration menu............................................................................. 27
3.3.6. Force calibration menu................................................................................ 29
3.3.7. Copy electrode............................................................................................. 29
3.4. History Log menu.................................................................................................. 30
EN7000-TS touch-screen User Guide
3
3.4.1. Records in log................................................................................................ 30
3.4.2. Clear log ........................................................................................................ 30
3.4.3. View log ......................................................................................................... 30
3.5. Configure menu................................................................................................... 31
3.5.1. Features (parameter)................................................................................... 32
3.5.2. Weld type(parameter)................................................................................. 32
3.5.3. Sensor (parameter)....................................................................................... 32
3.5.4. Toroid test (parameter) ................................................................................ 32
3.5.5. Frequency (parameter) ............................................................................... 32
3.5.6. Units (parameter).......................................................................................... 32
3.5.7. Program select (parameter)........................................................................ 32
3.5.8. Electrodes (parameter)................................................................................ 32
3.5.9. SCR Select (parameter) ............................................................................... 32
3.5.10. 2
nd
Stage (1) (parameter)............................................................................ 32
3.5.11. 2
nd
Stage (2) (parameter)............................................................................ 33
3.5.12. Retract (parameter)..................................................................................... 33
3.5.13. Stop on fault (parameter)............................................................................ 33
3.5.14. EOS on fault (parameter)............................................................................. 33
3.5.15. Headlock on fault (parameter)................................................................... 33
3.5.16. I/O Source (parameter) ............................................................................... 33
3.5.17. Analog control (parameter)....................................................................... 33
3.5.18. Analog output (parameter)......................................................................... 34
3.5.19. Waveform 10V= (parameter)...................................................................... 34
3.5.20. Contactor (parameter)................................................................................ 34
3.5.21. Clock menu................................................................................................... 34
3.5.22. COM0............................................................................................................. 34
3.5.23. COM1............................................................................................................. 34
3.5.24. COM2 menu.................................................................................................. 34
3.5.25. COM3............................................................................................................. 34
3.5.26. Initialise button............................................................................................... 35
3.5.27. Restart button................................................................................................ 35
3.5.28. EXP(E/IP) or Ethernet button....................................................................... 35
3.5.28.1. IP address [0 to 3] (parameters) .............................................................. 35
3.5.28.2. Sub-net mask [0 to 3] (parameters)......................................................... 35
EN7000-TS touch-screen User Guide
4
3.5.28.3. Gateway [0 to 3] (parameters) ............................................................... 35
3.5.28.4. COM4 ......................................................................................................... 35
3.5.28.5. COM5 ......................................................................................................... 35
3.5.28.6. COM6 ......................................................................................................... 36
3.5.28.7. MAC ID ....................................................................................................... 36
3.6. Discrete I/O status................................................................................................ 36
3.7. Bus I/O status......................................................................................................... 37
3.8. Analog I/O status ................................................................................................. 38
3.9. System information............................................................................................... 38
4. Quick start .................................................................................................................... 39
4.1. Wire the discrete I/O............................................................................................ 39
4.2. Access the Main menu........................................................................................ 40
4.3. Access the Configuration menu ........................................................................ 40
4.3.1. Set the configuration parameters............................................................... 41
4.4. Access the Main menu........................................................................................ 41
4.5. Edit the Use Program parameter........................................................................ 42
4.6. Access the Program menu ................................................................................. 42
4.6.1. Select Program 0........................................................................................... 42
4.7. Access the Options menu................................................................................... 43
4.7.1. Assign options................................................................................................ 43
4.8. Access the Current menu ................................................................................... 44
4.8.1. Assign the current parameters .................................................................... 44
4.9. Access the Timing menu ..................................................................................... 44
4.9.1. Assign the time values.................................................................................. 45
4.10. Access the Electrode menu............................................................................ 45
4.10.1. Access the current calibration screen ....................................................... 46
4.10.2. Set the current calibration parameters...................................................... 46
4.11. We’re ready to weld!....................................................................................... 46
EN7000-TS touch-screen User Guide
5
Not all parameters are visible at any
one time. Many parameters are
dependent on other parameters. Only
relevant parameters are displayed as
this reduces clutter on the screen. The
screens shown here are typical and
may not be exactly what you will see.
1. How to use the touch-screen
1.1. Start-up
On Start-up, the display will show the splash screen.
Proceed to the Main
Menu by tapping the Home icon (bottom right).
EN7000-TS touch-screen User Guide
6
1.2. Menu screen
The items described below are common to every menu screen.
UseProgram DiscreteI/O
˄
2
HistoryLog System
˅
12
3
4
5
6
Program BusI/O
Electrode AnalogI/O
i
MainMenu
1
Tapping the iin the center of the banner will display the
S
tatus screen.
Tapping it from the
S
tatus
screen will return to the previous screen.
2
Tapping the Home icon will return to the previous screen.
3
Tapping the UP arrow scrolls the display up one line at a time.
4
The size of the scroll bar handle indicates how many additional items
there are in the menu. The smaller the handle, the more items there are
in the entire menu to be displayed.
5
Tapping the blue area in the scroll bar will scroll the display up or down
one page at a time.
6
Tapping the DOWN arrow scrolls the display down one line at a time.
The remaining area is divided up into eight labeled buttons. Tapping one of
these buttons will either
Open the sub-menu for that function.
OR
Open an information window.
OR
If the button contains a parameter, edit that parameter.
EN7000-TS touch-screen User Guide
7
1.3. Status screen
This screen presents useful information regarding the status of the
control and the measurements from the last weld. Access the Status
screen by tapping on the iicon on the banner of any menu.
1
2
3
4
5
6
Conduction
35.5%
7
˅
2.00kA
5.00kA
1.00kA
Pre‐heat
Ma i nHe a t
˄
Ready
Pos t‐he a t
Progra m 2
Force 100lb
i
Status
1 This field displays the control status. Tapping on this
field will display a message screen giving the option
to reset the status.
2 Pre-heat current from the last weld
3 Main heat current from the last weld
4 Post-heat current from the last weld (Extended
Features must be enabled in the Configuration
menu)
5 Program used for the last weld
6 Force measured from the last weld
7 Percent Conduction of the SCR from the last weld
Tap the i in the centre of the banner to return to the previous screen.
Tap the HOME key to go to the main menu
EN7000-TS touch-screen User Guide
8
2. Editing parameters
Parameters can be edited in several different ways, depending upon their nature.
2.1. Numeric
When you tap on a button showing a numeric parameter, an editor window
opens:
e.g.
1 Present value of parameter
2 Use the keypad to enter a new value
3 Cancel the entry (present value remains unchanged)
4 Backspace the value in field 1
5 Enter the selected value (parameter is changed to new value)
Initially, the present value is shown. In the above example the parameter
called Use Program is set to the value 2.
Tap on the numeric buttons to enter a new value, then tap the green tick
key. The editor will close and return to the previous screen, showing the
new value entered.
If you enter an illegal value, a warning message appears and the
parameter is not changed. Close the warning message by taping on the
red X key in the top right corner.
EN7000-TS touch-screen User Guide
9
2.2. Radio button
This type of parameter has only two options.
e.g.
Standard Extended
Features
The presently selected option is highlighted. In the above example the
parameter called Features is set to Standard.
Each time you tap on the button, the parameter is set to the other option.
2.3. Multi-option
This type of parameter has more than two options.
e.g.
I/OSource
DISCRETE
The presently selected option is shown. In the above example the
parameter called I/O source is set to DISCRETE.
Each time you tap on the button the parameter will change to the next
option in the list. After the final option, the list starts again with the first
option.
2.4. Check box
This type of parameter is either on (box ticked) or off (box clear).
e.g.
Stop
onFault
In the above example the parameter called ‘Stop on fault’ is on.
Each time you tap on the button the parameter toggles between on (box
ticked) and off (box clear).
Altri manuali per EN7000-TS
2
Indice
Altri manuali Entron Schermo tattile
Manuali Schermo tattile popolari di altre marche
Elecro Engineering
Elecro Engineering Poolsmart Plus Istruzioni per l'installazione
Johnson Controls
Johnson Controls IQ4 HUB Manuale utente
Elo TouchSystems
Elo TouchSystems ET2270L Manuale utente
Elo TouchSystems
Elo TouchSystems ET1002L Manuale utente
Elo TouchSystems
Elo TouchSystems 3201L Manuale utente
Duratec
Duratec S15 Manuale utente
