Quick Start Manual
MANUAL-Wireless-DMX
For latest version visit:
www.enttec.com
2 ID: 192905
Tips for best performance
•Keep transmitter to receivers' line of sight
•Elevate the both transmitter and receiver above
any objects.
•Elevate above ground increase range achievable.
•Keep away from large metal objects
How to pair receiver(s):
1. Attach the antenna to DINTEC Wireless devices by
gently turning the bolt clockwise.
2. Connect power (9-24VDC) to POWER INPUT screw
terminals, as per the V+ and V- polarity. Warning:
Connecting power in a wrong polarity will
permanently damage the device.
3. Turn on the power for both transmitter and receivers.
The Power Indicator should turn on.
4. Ensure the RF LINK indicator on all receivers are off. If
RF LINK is on, please follow the unpair procedure
before you proceed next step.
5. On the transmitter, press and release the Link button.
The transmitter will search for a period of 10 seconds
for any unpaired receivers. The status indicator will
flash.
6. At the end of the search period, all RF LINK indicator
will be on for all the receivers. Which indicates that
they have been successfully paired with this
transmitter.
Signal Strength
indicator
>80%
>60%
>40%
>20%
Receiver:
On: when signal strength is
greater
than 80%
On: when signal strength is
greater
than 60%
On: when signal strength is
greater
than 40%
On: when signal strength is
greater
than 20%
How to unpair receiver(s):
1. Unpair a single receiver: On the receiver, press and
hold the Link button for more than 3 seconds to
unpair if from a transmitter. The RF Link indicator will
turn off.
2. Unpair all: On the transmitter, press and hold it is
Link button for more than 3 seconds to unpair all the
paired receivers.
