Envira-North EN560X0010 Guida

METRIC & IMPERIAL

DESIGN & ENGINEERING GUIDE

1-866-771-7766 bigair@enviranorth.com

www.EnvIRAnoRTh.CoM/jAzzfAns

TABLE OF CONTENTS

JAZZ FAN INTRODUCTION..................................... 1

Moving Air With Style............................................3

Ordering & Installation ..........................................4

Mounting System ...................................................4

Mounting Applications...........................................5

Safety Systems .......................................................6

FAN COMPONENTS DIAGRAM............................... 7

3 m (10’) Jazz Fan Assembly Drawing ....................8

3 m (10’) Jazz Fan Specifications............................9

Minimum Blade Clearance...................................10

Drop Assembly ....................................................11

Drop Pipe............................................................12

Remote Display ...................................................13

Control Assembly ................................................14

Fan Packaging Details..........................................15

THE JAZZ FAN - OUR NEWEST ADDITION

From showrooms to restaurants and atriums to office spaces, the

Jazz Fan’s creative touch of ambiance enhances the comforts and

aesthetics of each space. The sleek, ultra-modern design allows for

a magnitude of customizable finishes from vibrant red to brilliant

chrome and every imaginable color in between, enhancing any

sophisticate environment.

MOVING AIR WITH STYLE

Traditional airfoils (or blades) are linear in design and produce

greater noise at a particular frequency. Using varying points on the

leading edge of the blade spreads the noise or acoustic signature

over a greater range of frequencies, virtually eliminating any noise.

As a fan rotates, the tip of a blade spins faster than the fixed point

or ‘centre’ creating pockets of minimal air movement directly

underneath the fan. The Jazz Fan blade design tackles this challenge

with a varying degree angle of attack, never before seen in our

industry. Ranging from 6° (tip) to 14° at its greatest point, the Jazz

Fan diminishes the resistance against each blade maximizing air

movement and minimizing power consumption.

Jazz Fan’s unique blade design doesn’t just look good; it deploys

the same modulated blade technique utilized in advanced stealth

helicopters; making it possible to move more air; quietly and in

style. Jazz Fans move 45,000 CFM with a max noise level of

39dBA. Covering an area of 260m3 (2,800 ft²), the Jazz fan exceeds

the highest of industry standards in all categories of form and

function.

ORDERING AND INSTALLATION MADE SIMPLE

Jazz Fans come as a complete package that includes; the Jazz Fan,

Universal Mounting System, Wiring Kit, and Control Panel. Having

everything included in this complete package streamlines ordering,

shipping and installation. From start to finish, Envira-North Systems

provides everything you need – in one simple package.

DISTINCTIVE UNIVERSAL MOUNTING SYSTEM

A complete redesign from top to bottom – no other HVLS Fan

on the market can provide the robust yet sleek design of the Jazz

Fan’s Universal Mounting System. Included in every Jazz Fan,

the distinctive Universal Mounting System permits the Jazz Fan to

be installed on a wide range of ceiling structures that includes; I

Beams, Open Web Steel Joists, Wood Beams (Glu Lam), Purlins and

Wooden Trusses.

The design doesn’t stop there – the entire mounting kit is intended

to act as a housing for your electric wiring – meaning power to the

fan and from the control is invisible to the people below. Better yet,

the Universal Mounting System also allows for the Jazz Fan to be

located on any sloped ceilings from 0-18.5° with a complete 360°

swivel.

DIFFERENT MOUNTING APPLICATIONS

GLU LAM MOUNT OWSJ MOUNT

PURLIN MOUNT WOOD TRUSS MOUNT

For a complete review of the mounting system and how it applies to your application, please reference the

Jazz Fan Installation Guide. To obtain a copy, please visit www.enviranorth.com

SAFETY SYSTEMS

The Jazz Fans are supplied with superior safety equipment and

harnessing systems to maintain an integral safety status and give

the customer peace of mind. All fan installations include safety

cables, safety flat washers, safety lock washers, safety bolts and

thermal protection on the motor to prevent overheating. If fans are

installed between racks in a storage facility, signs should be posted

identifying locations. The variable frequency drive also comes

equipped with a current limit, motor overload sensor, minimum and

maximum speed control.

[3 mm] 1/8” SS Cable [2.13 m] 7’ Length

(2)[6 mm] 1/4” SS Thimble

(4)[3 mm] 1/4” SS Thimble

FAN COMPONENTS DIAGRAM

[3 mm] 1/8” SS Cable

[2.13 m] 7’ Length

(2)[6 mm] 1/4” SS Thimble

(4)[3 mm] 1/4” SS Thimble

[152.4 mm] 6” Standard Jazz Drop Pipe

Optional Custom Lengths Available

See Mounting Applications

Hub Cover Assembly

(LED Light Optional)

Fan Drive Assembly

(Includes Hub)

(5) Blades (Not Shown)

(20) 1/4” - 20 x 0.75 LG

Hex Cap Screws

(5) 8-32 x 1.375” LG Pan Head Screws

Note: All bolts are “class 8.8”

FT = Fully Threaded

(#) = Quanitity Supplied

3 M (10’) JAZZ FAN

0.7m

27.1in

3.1m

120.3in

Checked Date:

July-17-15 2:50:10 PM

Last Saved Date:

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE

PROPERTY OF ENVIRA-NORTH SYSTEMS LTD. ANY

REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE

WRITTEN PERMISSION OF ENVIRA-NORTH SYSTEMS LTD IS

PROHIBITED. SHOULD THERE BE ANY DISCREPANCIES WITH

THIS CONSTRUCTION DRAWING, ENVIRA-NORTH SYSTEMS LTD

SHOULD BE CONTACTED IMMEDIATELY FOR RESPONSE.

PROPRIETARY AND CONFIDENTIAL

REVISIONS:

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

WEIGHT IS IN POUNDS

TOLERANCES:

FRACTIONAL

1/16

ANGULAR: MACH

0.1

BEND

0.5

TWO PLACE DECIMAL

0.060(1.5mm)

THREE PLACE DECIMAL

0.030(0.76mm)

MATERIAL

VENDORS NUMBER:

AS SPECIFIED

DRAWN

Checked By:

COMMENTS:

Drawing Date:

Last Revised Date:

TITLE:

SIZE

DWG. NO.

REV

WEIGHT: 83.92

SCALE: 1:25

28/05/2015

SHEET 1 OF 1

EN560X0010

DO NOT SCALE DRAWING

FINISH

Envira-North Systems Ltd.

JAZZ FAN - COMPLETE

ASSEMBLY

Q:\01_Envira-North\SolidWorks (DWG) EN\EN560X0010

Note:

Contractor is responsible for

verifying all site conditions to include field

dimensions where applicable. It the contractor elects to

make any changes without notifying Envira-North Systems

Ltd. the contractor is responsible for the same. All

drawings are to be used as general architectural intent only

unless otherwise stamped. See Engineering drawings for

structural design information. Contractor to ensure that all

building departments and

authorities are informed in regard to the work and that all

permits are attained before commencing the work.

3 M (10’) JAZZ FAN

General

Model Number.............................................................. EN560X0010

Diameter ....................................................................... 3 m (10’)

Number of Blades.......................................................... 5

Motor Power ................................................................. 0.5 hp

Noise Level ................................................................... 53 dBA

Overall Weight (no mount)............................................ 90 lbs (41 kgs)

Packaged Fan Weight ................................................... 135 lbs (61 kgs)

Performance (at max speed)

Airflow .......................................................................... 45,000 CFM

Maximum Speed ........................................................... 120 RPM

Power Usage ................................................................. 450 W

Maximum Effective Diameter ........................................ 18.2 m (60’)

Construction

Frame............................................................................ Black Zinc Coated Steel

Hub .............................................................................. Black Zinc Coated Steel

Blades ........................................................................... Fibre Filled Polypropolene

Safety Components

Safety Cables................................................................. 1/8” Stainless Steel Cable

Mounting Hardware

Standard Mount............................................................. Universal Mounting System

Mounting*

Glu Lam Mount............................................................. Included

Open Web Steel Joist..................................................... Included

Wood Beam Mount....................................................... Included

Purlin “Z” Mount........................................................... Included

Gearmotor

Type.............................................................................. Helical Inline

HP................................................................................. 0.5 hp (0.37 kW)

Ratio.............................................................................. 15.77:1

Volts.............................................................................. 230 V

Amps Consumed ........................................................... 1.9 A

Insulation Class ............................................................. F

Torque........................................................................... 289 lb-in

VFD Control

Enclosure....................................................................... Nema 4X

Standard Power ............................................................. 110 V

50 / 60 Hz Operation

Jazz Wall Control

Operation...................................................................... Keypad

Lockable........................................................................ Yes

Light Control ................................................................. Dimmable ON / OFF

Wiring........................................................................... Supplied

Diagnositc Capability .................................................... Full

FAN BLADE CLEARANCE JAZZ FAN BLADE CLEARANCES

12in

(304.8mm)

120in

3048mm

12in

304.8mm

8in

203mm

27in

686mm

27in

675mm

29in

739mm

CLEARANCES:

Open ceiling, center of fan to roof deck for ideal

•

operating performance without comprising

overall fan performance

Finished ceiling, min 48" [1220] center of fan to

•

finished ceiling for ideal operating performance

without comprising overall fan performance

Min 12" [304.8 from fan blade's leading edge to

•

obstruction above or below fan.

Min 8" [203] from side of fan to any obstruction

•

Min floor to fan leading edge height 120" [3048]

•

NOTE: All dimensions are

minimum requirements

Dimensions are in inches,

metric dimensions [mm].

SLOPED ROOF

FLAT ROOF

FAN FRAME DETAIL

HEAT SOURCE CLEARANCES:

As per heating installation minimum clearances

•

AIR DUCT CLEARANCES:

Excessive air movement on the fan will create

•

improper balancing and excessive stresses to

the moving components

ENG APPR. Date:

ENG APPR.

Checked Date:

September-08-15 11:42:05 AM

Last Saved Date:

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE

PROPERTY OF ENVIRA-NORTH SYSTEMS LTD. ANY

REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE

WRITTEN PERMISSION OF ENVIRA-NORTH SYSTEMS LTD IS

PROHIBITED. SHOULD THERE BE ANY DISCREPANCIES WITH

THIS CONSTRUCTION DRAWING, ENVIRA-NORTH SYSTEMS LTD

SHOULD BE CONTACTED IMMEDIATELY FOR RESPONSE.

PROPRIETARY AND CONFIDENTIAL

REVISIONS:

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

1/16

ANGULAR: MACH

0.1

BEND

0.5

TWO PLACE DECIMAL

0.060

THREE PLACE DECIMAL

0.030

MATERIAL

VENDORS NUMBER:

DRAWN

Checked By:

MFG APPR.

Q.A.

COMMENTS:

Drawing Date:

Last Revised Date:

TITLE:

SIZE

DWG. NO.

REV

WEIGHT:

SCALE: N.T.S.

B. MARKS

08/09/2015

SHEET 1 OF 1

DO NOT SCALE DRAWING

FINISH

Envira-North Systems Ltd.

Q:\01_Envira-North\SolidWorks (DWG) EN\JAZZ-MOUNTING-CONTRAINTS\JAZZ-MINIMUM CLEARANCES

Note:

Contractor is responsible for

verifying all site conditions to include field

dimensions where applicable. It the contractor elects to

make any changes without notifying Envira-North Systems

Ltd. the contractor is responsible for the same. All

drawings are to be used as general architectural intent only

unless otherwise stamped. See Engineering drawings for

structural design information. Contractor to ensure that all

building departments and

authorities are informed in regard to the work and that all

permits are attained before commencing the work.

JAZZ FAN

MIMIMUM CLEARANCES

MINIMUM DIMENSIONS

FOR CLEARANCE

Indice

Manuali Fan popolari di altre marche

ELTA FANS

ELTA FANS H03VV-F Manuale utente

Hunter

Hunter 20714 Manuale di istruzioni

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuale utente

Hunter

Hunter Caraway Manuale di istruzioni

Panasonic

Panasonic FV-15NLFS1 Manuale utente

Kompernass

Kompernass KH 1150 Manuale utente

VES

VES FALA100/12V/TR Manuale utente

Vertiv

Vertiv Liebert DCD Manuale utente

Westinghouse

Westinghouse GFP Series Manuale utente

Venmar

Venmar KUBIX HRV PLUS Series Manuale utente

Maico

Maico ECR 31 Manuale utente

Sonnenkonig

Sonnenkonig Dinky Manuale utente

S&P

S&P ECOWATT HXBR Manuale utente

Wider

Wider IMP03369BH Manuale utente

Panasonic

Panasonic F-60DHN Manuale utente

Hinkley

Hinkley HIGHLAND Manuale utente

Broan

Broan 766BN Manuale utente

Premium

Premium PFS16022 Istruzioni per il montaggio