10 Frequency selection mode (P = PRESET, U = USER, TUNE = TUNE mode).
11 Selected channel number (PRESET or USER modes only).
12 AF ‘overload’ indicator (NOT TX overload status).
When used in the internal slot of the Panasonic and Ikegami camcorders both audio channels are
available through the d-type connection on the bottom of the receiver.
When used with the Sony camcorders, only channel 1 is available through the 15 pin d-type connector
as Sony prevent access of the analogue channel 2 internally. Hence Audio Ltd provide both outputs on
the 7 pin Binder socket on the head of the receiver. The accompanying dual output cable should be
used to connect both channels to the audio inputs on the back of the camcorder.
To alter the receiver parameters for a desired receiver, press the ‘down’ arrow button (middle button)
for two seconds and the main menu will appear:
Accessing the Frequency option
To access the frequency menu, use the left or right arrow to highlight the frequency icon and press the
middle button.
A range of frequencies will be displayed. To choose a particular frequency, use the left or right arrow
to highlight the desired frequency. To confirm this choice, press the middle button. The display will
return to the main menu.
Accessing the AF Output option
To access the AF Output menu, use the left or right arrow to highlight the AF output icon and press the
middle button. A range of output values will be displayed.
