5
Immersion Controller
The IMC is supplied with its own surface mounting box, which can be mounted over
a single or double gang ush wall box. It should not be mounted on an unearthed
metal surface.
An immersion heater must have its own radial circuit.
This should be protected by a 16 Amp RCBO.
Mounting & Installation
Caution!
Installation and connection should only be carried out by a qualied person.
Only qualied electricians or authorised service sta are permitted to open the controller.
If the controller is used in a way not specied by the manufacturer, its safety may be impaired.
Prior to setting the controller, it is necessary to complete all required settings described in the section.
Do not use sharp tools to push any button
WARNING! Isolate mains supply before commencing installation and ensure the unit is properly earthed
