EPropulsion NAVY Manuale utente

NAVY REMOTE CONTROL USER MANUAL

Nov, 2018 Version 1.0

Acknowledgement

Thanks for choosing ePropulsion products, your trust and support in our

company are sincerely appreciated. We are dedicated to providing high-

performance electric outboards, as well as thrusters, reliable lithium batteries

and accessories.

Welcome to visit www.epropulsion.com and contact us if you have any

concerns.

Using This Manual

Before use of the product, please read this user manual thoroughly to

understand the correct and safe operations. By using this product, you

hereby agree that you have fully read and understood all contents of this

manual. ePropulsion accepts no liability for any damage or injury caused by

operations that contradict this manual.

Due to ongoing optimization of our products, ePropulsion reserves the rights

of constantly adjusting the contents described in the manual. ePropulsion

also reserves the intellectual property rights and industrial property rights

including copyrights, patents, logos and designs, etc.

This manual is subject to update without prior notice, please visit our website

www.epropulsion.com for the latest version. If you find any discrepancy

between your products and this manual, or should you have any doubts

concerning the product or the manual, please visit www.epropulsion.com.

ePropulsion reserves the rights of nal interpretation of this manual.

This manual is multilingual, in case of any discrepancy in the interpretation

of different language versions, the English version shall prevail.

Symbols

The following symbols will help to acquire some key information.

Important instructions or warnings

Useful information or tips

Product Identication

Below picture indicates the serial numbers of NAVY Remote Control. Please

note the position of the serial numbers and record them for access to

warranty service and other after-sale services.

Figure 0-1

Model: NAVY Remote Controller

Serial No.: DNRCXXXXXXX

Table of Contents

Acknowledgement .................................................................................... 1

Using This Manual...................................................................................... 1

Symbols ...................................................................................................... 1

Product Identication ................................................................................ 2

Table of Contents ....................................................................................... 3

1 Product Overview.................................................................................... 4

1.1 In the Package .................................................................................. 4

1.2 Parts and Diagrams .......................................................................... 5

1.3 Specication...................................................................................... 5

2 Displaying...............................................................................................6

3 Charging ............................................................................................... 10

3.1 Charging by solar power................................................................... 10

3.2 Charging by wired connection.......................................................... 10

4 Power Adjusting................................................................................... 12

4.1 Power Adjusting for Remote Control ................................................ 12

4.2 Adjusting Maximum Forward/Backward Power ............................... 13

4.3 Recalibration .................................................................................... 14

5 Use of Kill Switch................................................................................. 16

6 Pairing Remote Control to the Outboard .......................................... 17

7 Warning Messages .............................................................................. 20

8Warranty ................................................................................................ 23

8.1 Warranty Policies ............................................................................ 23

8.2 Out of Warranty............................................................................... 24

8.3 Warranty Claim Procedures ............................................................ 24

1 Product Overview

The NAVY Remote Control is used for starting and stopping the NAVY

outboard motor, adjusting the speed of the motor, configuring the battery

parameters, displaying the system information and messages, etc. The

Remote Control is powered by either solar power or the built-in lithium

battery. Remote Control wirelessly or wiredly communicates with the

outboard control system built in the main outboard motor. While using the

Remote Control, it requires an additional steering wheel to help steer.

1.1 In the Package

When you receive a set of NAVY Remote Control, unpack its package and

check if all the items below are included in the package. If there is any loss

or transport damage, please contact your dealer immediately.

Items Qty./Unit Figure

NAVY

Remote

Control

1 set

Fixing Guide 1 piece 41mm

98mm

2× 6mm

Plotting Scale - 1:1

Screw Size - M6×12mm

Navy 6.0R

Fixing Guide

For Remote Controller

Room 702

Kowloon Bldg

555 Nathan Rd

Kowloon, Hong Kong

www.epropulsion.com

User Manual,

Warranty

Card &

Invitation

Card

1 set

Kill Switch 2 pieces

Warranty

Invitation Card

1.2 Parts and Diagrams

Figure 1-1

1.3 Specication

NAVY Remote Control

Communication Wireless / Wired

Communication Distance ≤10 m

Weight 0.65 kg / 1.43 lbs.

Dimension (L x W x H) 193 mm x 130 mm x 112 mm /

7.6" x 5.1" x 4.4"

Throttle Handle

Display Panel

Buttons

Kill Switch

Communication Port

(Bottom)

Solar Panel

2 Displaying

Battery Level Indicator

Throttle Reset Indicator

Battery Level/Voltage

Kill Switch Status Indicator

Overheat Alert

Current Speed

Distance/Time

Throttle Power

GPS Status Indicator

Travelled Distance/

Time or Remaining

Distance/Time

Figure 2-1

Buttons Functions

“Power”

1. In power-off state, press and hold the power button to power

on the Remote Control.

2. In power-on state, press and hold the power button to power

off the Remote Control.

“OK”

1. On setting pages, press " " button to save the current

settings and switch to the next item.

2. On setting pages, press and hold “ ” button, and the

system will save your settings, the display will exit from

setting page and return to the home page.

3. In power-on state, when home page displays or all the

characters display on the page, press “ ” button

and hold 5s to enter the Remote Control pairing page.

Buttons Functions

“Up”

1. On any setting page, press “

” button to view options for

current setting.

2. In power-on state, when home page displays, press “

”

button and hold 10s to enter the throttle calibration page.

3. On home page, press “

” button to switch the travelling

distance or time displaying icon between “ ” and “ ”.

press

“Up”

button

Main page 1 Main page 2

“Menu”

1. In power-on state, press and hold “ ” button to enter the

preference setting page.

Preference setting page

2. On preference setting page, press and hold “ ” button to

enter the battery setting page.

Battery setting page

3. On any page, press “ ” button to return home page.

If users enter the page without setting any parameters, the current

parameters displayed on the page will be saved as user parameters by

default.

If “ ” shows on start-up, it indicates system initialization.

Icons Functions

Battery level

indicator

Indicating approximate battery level. The

solid blocks stand for remaining battery.

Battery level/

voltage

Indicating accurate current battery level

percentage/battery voltage, is congurable

in preference setting page.

For example:

: indicates current battery level.

: indicates current battery voltage.

GPS status

indicator

Hidden: no satellite signal is received

or GPS does not work.

Blink: GPS is connecting to satellites.

Shown constantly: GPS is in use.

Over-heat alert

Hidden: system temperature is in

normal range.

Blink: system temperature is a little

high and the maximum input power of

motor has been lowered than 3kW.

Shown constantly: system is over

temperature and the outboard will

stop working. The outboard motor

can’t be started until the system

temperature drops to a certain level.

Altri manuali per NAVY

Indice

Altri manuali ePropulsion Telecomando

ePropulsion

ePropulsion Evo Dual Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione

ePropulsion NAVY Manuale utente

Manuali Telecomando popolari di altre marche