Epson RC620 CU Manuale utente

Rev.8 EM15XC3076F

ROBOT CONTROLLER

RC620

ROBOT CONTROLLER RC620 Rev.8

RC620 Rev.8 i

ROBOT CONTROLLER

RC620

Rev.8

ii RC620 Rev.8

FOREWORD

Thank you for purchasing our robot products.

This manual contains the information necessary for the correct use of the robot controller.

Please carefully read this manual and other related manuals before installing the robot

system.

Keep this manual handy for easy access at all times.

RC620 robot controller consists of the following:

RC620 CU (Control Unit)

RC620 DU (Drive Unit)

This manual contains the information for the RC620 CU (Control Unit).

For RC620 DU (Drive Unit), refer to the Robot Controller / Drive Unit RC620DU manual.

The information for the robot controller is describes as below, indicating both RC620 CU

and RC620 DU:

Robot controller

Controller

RC620

The information for the either unit (CU or DU) is described as below:

RC620CU Control Unit

RC620DU Drive Unit

RC620 Rev.8 iii

WARRANTY

The robot system and its optional parts are shipped to our customers only after being

subjected to the strictest quality controls, tests, and inspections to certify its compliance

with our high performance standards.

Product malfunctions resulting from normal handling or operation will be repaired free of

charge during the normal warranty period. (Please ask your Regional Sales Office for

warranty period information.)

However, customers will be charged for repairs in the following cases (even if they occur

during the warranty period):

Damage or malfunction caused by improper use which is not described in the manual,

careless use.

Malfunctions caused by customers’ unauthorized disassembly.

Damage due to improper adjustments or unauthorized repair attempts.

Damage caused by natural disasters such as earthquake, flood, etc.

Warnings, Cautions, Usage:

If the

robot system

associated equipment is used outside of the usage conditions and

product

specifications described in the manuals, this warranty is void.

If you do not follow the WARNINGS and CAUTIONS in this manual, we cannot be

responsible for any malfunction or accident, even if the result is injury or death.

We cannot foresee all possible dangers and consequences. Therefore, this manual

cannot warn the user of all possible hazards.

iv RC620 Rev.8

TRADEMARKS

Microsoft, Windows, and Windows logo are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries. Other brand and

product names are trademarks or registered trademarks of the respective holders.

TRADEMARK NOTATION IN THIS MANUAL

Microsoft® Windows® XP Operating system

Microsoft® Windows® Vista Operating system

Microsoft® Windows® 7 Operating system

Throughout this manual, Windows XP, Windows Vista, and Windows 7 refer to above

respective operating systems. In some cases, Windows refers generically to Windows XP,

Windows Vista, and Windows 7.

NOTICE No part of this manual may be copied or reproduced without authorization.

The contents of this manual are subject to change without notice.

Please notify us if you should find any errors in this manual or if you have any comments

regarding its contents.

INQUIRIES

Contact the following service center for robot repairs, inspections or adjustments.

If service center information is not indicated below, please contact the supplier office for

your region.

Please prepare the following items before you contact us.

-Your controller model and its serial number

-Your manipulator model and its serial number

-Software and its version in your robot system

-A description of the problem

SERVICE CENTER

RC620 Rev.8 v

MANUFACTURER

Seiko Epson Corporation

Toyoshina Plant

Robotics Solutions Operations Division

6925 Toyoshina Tazawa,

Azumino

-shi, Nagano, 399-8285

Japan

TEL

: +81-(0)263-72-1530

FAX

: +81-(0)263-72-1495

SUPPLIERS

North & South America

Epson

America, Inc.

Factory Automation/Robotics

18300 Central Avenue

Carson, CA 90746

USA

TEL

: +1-562-290-5900

FAX

: +1-562-290-5999

E-MAIL

: info@robots.epson.com

Europe

Epson Deutschland GmbH

Factory Automation Division

Otto

-Hahn-Str.4

-40670 Meerbusch

Germany

TEL

: +49-(0)-2159-538-1391

FAX

: +49-(0)-2159-538-3170

E-MAIL

: robot.infos@epson.de

China

Epson (China) Co., Ltd.

Factory Automation Division

7F, Jinbao Building No. 89, Jinbao Street,

Dongcheng District, Beijing,

China, 100005

TEL

: +86-(0)-10-8522-1199

FAX

: +86-(0)-10-8522-1120

Taiwan

Epson Taiwan Technology & Trading Ltd.

Factory Automation

Division

14F, No.7, Song Ren Road, Taipei 110,

Taiwan, ROC

TEL

: +886-(0)-2-8786-6688

FAX

: +886-(0)-2-8786-6677

Korea

Epson Korea Co., Ltd.

Marketing Team (Robot Business)

27F DaeSung D-Polis A, 606

vi RC620 Rev.8

Seobusaet

-gil, Geumcheon-gu, Seoul, 153-803

Korea

TEL

: +82-(0)-2-3420-6692

FAX

: +82-(0)-2-558-4271

SoutheastAsia

Epson Singapore Pte. Ltd.

Factory Automation System

1 HarbourFront Place, #03

-02,

HarbourFront Tower One,

Singapore 098633

TEL

: +65-(0)-6586-5696

FAX

: +65-(0)-6271-3182

India

Epson India Pvt. Ltd.

Sales & Marketing (Factory Automation)

12th Floor, The Millenia, Tower A, No. 1,

Murphy Road, Ulsoor, Bangalore,

India 560008

TEL

: +91-80-3051-5000

FAX

: +91-80-3051-5005

Japan

Epson Sales

Japan Corporation

Factory Automation Systems Department

Nishi

-Shinjuku Mitsui Bldg.6-24-1

Nishishinjuku, Shinjuku

-ku, Tokyo 160-8324

Japan

TEL

: +81

-(0)3-5321-4161

RC620 Rev.8 vii

Before Reading This Manual

Do not connect TP1 to the following Robot Controllers. Connecting to the following Robot

Controllers may result in malfunction of the device since the pin assignments are different.

RC420 / RC520 / SRC5** / SRC-3** / SRC-2**

Be careful of the operating instructions of the TP1 when connecting it to the Robot

Controller RC180/RC170, it is different from the explanation in this manual.

When using the TP1 with the RC180/RC170, refer to the RC170 / RC180 Option Teach

Pendant TP1.

Do not connect the followings to the TP port of RC620. Connecting to the followings may

result in malfunction of the device since the pin assignments are different.

OPTIONAL DEVICE dummy plug

Operation Pendant OP500

Operator Pendant OP500RC

Operator Panel OP1

Jog Pad JP500

Teaching Pendant TP-3**

Security support for the network connection

The network connecting function (Ethernet) on our products assumes the use in the local

network such as the factory LAN network. Do not connect to the external network such

as Internet.

In addition, please take security measure such as for the virus from the network connection

by installing the antivirus software.

Security support for the USB memory

Make sure the USB memory is not infected with virus when connecting to the Controller.



NOTE



NOTE



NOTE

Table of Contents

viii RC620 Rev.8

Safety 1. Safety 3

2. Conventions 3

3. Safety Precautions 4

Setup & Operation

1. Specifications 9

1.1 System Example.......................................................................................9

1.2 Standard Specifications..........................................................................10

1.3 Outer Dimensions...................................................................................13

2. Part Names and Functions 14

2.1 Part Names.............................................................................................14

2.2 Functions................................................................................................16

2.3 LED and LCD..........................................................................................19

2.4 Safety Features......................................................................................22

3. Installation 24

3.1 Unpacking...............................................................................................24

3.2 Environmental Requirements.................................................................24

3.2.1 Environment............................................................................24

3.2.2 Installation...............................................................................25

3.3 Power Supply..........................................................................................26

3.3.1 Specifications..........................................................................26

3.3.2 AC Power Cable......................................................................27

3.4 Cable Connection...................................................................................27

3.4.1 Typical Cable Connection.......................................................28

3.4.2 Connecting Manipulator to Controller.....................................29

3.5 Noise Countermeasures.........................................................................30

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente