Epson ActionDesk 4000 Manuale utente

IMPORTANT NOTICE

DISCLAIMER OF WARRANTY

Epson America makes no representations or warranties, either express or implied, by or

with respect to anything in this manual, and shall not be liable for any implied warranties

of merchantability and fitness for a particular purpose or for any indirect, special, or

consequential damages. Some states do not allow the exclusion of incidental or

consequential damages, so this exclusion may not apply to you.

system, or transmitted, in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written permission of Epson

America, Inc. No patent liability is assumed with respect to the use of information

contained herein. Nor is any liability assumed for damages resulting from the use of the

information contained herein. Further, this publication and features described herein are

subject to change without notice.

TRADEMARKS

Epson is a registered trademark of Seiko Epson Corporation,

ActionDesk is a trademark and Epson Connection is a service mark of Epson America, Inc.

General notice: Other product names used herein are for identification purposes only and

may be trademarks of their respective owners. Epson disclaims any and all rights in those

marks.

Torrance, California, USA 8/1/93

Important Safety Instructions

Read all of these instructions and save them for later reference.

Follow all warnings and instructions marked on the computer.

Unplug the computer from the wall outlet before cleaning. Use a

damp cloth for cleaning; do not use liquid or aerosol cleaners.

Do not spill liquid of any kind on the computer.

Do not place the computer on an unstable cart, stand, or table.

Slots and openings in the cabinet and the back or bottom are

provided for ventilation; do not block or cover these openings.

Do not place the computer near or over a radiator or heat

Operate the computer using the type of power source indicated

on its label.

If you plan to operate the computer in Germany, observe the

following safety precaution:

To provide adequate short-circuit protection and over-current

protection for this computer, the building installation must

be protected by a 16 Amp circuit breaker.

Beim Anschluß des Computers an die Netzversorgung muß

sichergestellt werden, daß die Gebäudeinstallation mit einem

16 A Überstromschutzschalter abgesichert ist.

Connect all equipment to properly grounded (earthed) power

outlets. If you are unable to insert the plug into an outlet, contact

your electrician to replace your outlet. Avoid using outlets on

the same circuit as photocopiers or air control systems that

regularly switch on and off.

10. Do not allow the computer’s power cord to become damaged or

frayed.

iii

11. If you use an extension cord with the computer, make sure the

total of the ampere ratings of the devices plugged into the

extension cord does not exceed the ampere rating for the

extension cord. Also, make sure the total of all products plugged

into the wall outlet does not exceed 15 amperes.

12. Do not insert objects of any kind into this product through the

cabinet slots.

13. Except as specifically explained in this User’s Guide, do not

attempt to service the computer yourself. Refer all servicing to

qualified service personnel.

14. Unplug the computer from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

When the power cord or plug is damaged.

If liquid has entered the computer.

If the computer does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions. Improper adjustment

of other controls may result in damage and often requires

extensive work by a qualified technician to restore the

computer to normal operation.

If the computer has been dropped or the cabinet has been

damaged.

If the computer exhibits a distinct change in performance.

Instructions Importantes de Sécurité

10.

Lire complètement les instructions qui suivent et les conserver

pour references futures.

Bien suivre tous les avertissements et les instructions indiqués sur

l’ordinateur.

Debrancher l’ordinateur de toute sortie murale avant le

nettoyage.

Utiliser un chiffon humide; ne jamais utiliser un nettoyeur

liquide ou une bonbonne aerosol.

Ne jamais renverser un liquide d’aucune sorte sur l’ordinateur.

Ne pas placer l’ordinateur sur un chariot, un support, ou une table

instable.

Les events dans les meubles, à l’arrière et

dessous sont conçus

pour l’aération; on ne doit jamais les bloquer. Ne pas placer

l’ordinateur près d'une source de chaleur directe.

Le fonctionnement de l’ordinateur doit s’effectuer conformément

au type de source d’alimentation indiquée sur l’étiquette.

Lorsqu’on desire utiliser l’ordinateur en Allemagne, on doit

observer les normes sécuritaires qui suivent:

Afin d’assurer une protection adequate à l’ordinateur contre

les court-circuits et le survoltage, l’installation de l’édifice

doit comprendre un disjoncteur de 16 amp.

On doit brancher tout l’équipement dans une sortie reliée à la

masse. Lorsqu’il est impossible d’insérer la fiche dans la prise, on

doit retenir les services d’un électricien ou remplacer la prise. Ne

jamais utiliser une prise sur le même circuit qu’un appareil à

photocopie ou un système de contrôle d’aération avec

commutation marche-arrêt.

S’assurer que le cordon d’alimentation de l’ordinateur n’est pas

effrité.

11. Dans le cas où on utilise un cordon de rallonge avec l’ordinateur,

on doit s’assurer que la valeur totale d’ampères branches dans le

cordon n’excède en aucun temps les amperes du cordon de

rallonge. La quantité totale des appareils branches dans la prise

murale ne doit jamais excéder 15 amperes.

12. Ne jamais insérer un objet de quelque sorte que ce soit dans les

cavités de cet appareil.

13. Sauf tel que spécifié dans la notice d’utilisation, on ne doit jamais

tenter d’effectuer une réparation de l’ordinateur. On doit référer

le service de cet appareil à un technicien qualifié.

14. Debrancher l’ordinateur de la prise murale et confier le service au

personnel de service qualifié selon les conditions qui suivent:

Lorsque le cordon d’alimentation ou la prise sont

endommagés.

Lorsqu’un liquide s’est infiltré dans l’ordinateur.

Lorsque l’ordinateur refuse de fonctionner normalement

même en suivant les instructions. N’ajuster que les

commandes qui sont énumérées dans les instructions de

fonctionnement. Tout ajustement inadéquat de tout autre

contrôle peut provoquer un dommage et souvent nécessiter

des réparations élaborées par un technicien qualifié afin de

remettre l’appareil en service.

Lorsqu’on a échappé l’ordinateur ou que l’on a endommagé

le boîtier.

Lorsque l’ordinateur démontre un changement note au niveau

de sa performance.

Contents

Introduction

VGA and IDE Drivers

........................

Optional Equipment

........................

System Memory

........................

Cache Memory

.........................

Video Memory

.........................

Microprocessor

.........................

Math Coprocessor

.......................

Drives

..............................

How to Use This Manual

......................

Conventions Used in This Manual

..............

Where to Get Help

.........................

Chapter 1 Setting Up Your System

Getting Started

............................

1-1

Choosing a Location

......................

1-1

Unpacking Your Computer

.................

1-2

Connecting the Computer

.....................

1-3

Connecting a Keyboard

....................

1-3

Connecting a Mouse

......................

1-3

Connecting a Monitor

.....................

1-4

Connecting a Printer or Other Device

............

1-5

Connecting the Power Cord

.................

1-6

Turning On the Computer

.....................

1-7

Turning Off the Computer

.....................

1-10

vii

Chapter 2

Running the SETUP Program

Starting the SETUP Program

....................

2-2

The System Setup Option

......................

2-3

Setting the Time and Date

...................

2-3

Setting the Video Display Type

................

2-4

Checking System Memory

...................

2-4

Setting the Diskette Drive(s)

..................

2-4

The Fixed Disk Setup Option

....................

2-5

Defining Your Own Drive Type

................

2-5

The Advanced System Setup Option

................

2-6

Configuring Cache Memory

..................

2-6

Configuring Memory Shadow

.................

2-7

Configuring Chipset Registers

.................

2-7

Setting the Boot Options

.......................

2-8

The System Security and Anti-Virus Option

...........

2-9

The System Summary Option

...................

2-10

Exiting the SETUP Program

.....................

2-11

Post-SETUP Procedures

.......................

2-12

Chapter 3

Using Your Computer

Inserting and Removing Disks

...................

3-1

Stopping a Command or Program

.................

3-2

Resetting the Computer

.......................

3-3

Using a Password

...........................

3-4

Changing the Processor Speed

...................

3-6

Chapter 4

Installing and Removing Options

Removing the Cover

.........................

4-2

Replacing the Cover

.........................

4-4

Locating the Internal Components

.................

4-5

Changing the Jumper Settings

...................

4-6

Setting the Jumpers

.......................

4-8

Installing Memory Modules (SIMMs)

...............

4-10

Inserting SIMMs

.........................

4-11

Removing SIMMs

........................

4-13

Installing an Option Card

......................

4-14

viii

Removing an Option Card

.....................

4-18

Removing the Option Card Connector Board

..........

4-18

Replacing the Option Card Connector Board

..........

4-20

Adding Video Memory

.......................

4-21

Installing the Video Chips

..................

4-21

Installing External Cache

......................

4-23

Installing the Chips

......................

4-24

Upgrading the Microprocessor

..................

4-26

Replacing the Processor Chip

................

4-27

Installing a Heat Sink

.....................

4-29

Post-installation Procedures

....................

4-29

Chapter 5

Installing and Removing Drives

Installing a Hard Disk Drive in the Internal Drive Bay . . . . .

5-2

Removing the Mounting Frames . . . . . . . . . . . . . . . 5-3

Connecting the Hard Disk Drive Cables . . . . . . . . . .

5-4

Installing the Hard Disk Below the Mounting Bracket . .

5-8

Installing the Hard Disk On the Mounting Bracket . . . .

5-10

Removing a Hard Disk Drive From the Internal Drive Bay . . .

5-13

Installing a Drivein the Upper External Drive Bay . . . . . . .

5-13

Connecting the Drive and Power Cables . . . . . . . . . .

5-16

Removing a Drive from the Upper Drive Bay . . . . . . . . . .

5-18

Reconnecting the Drive and Power Cables to the Diskette

Drive in the Lower Drive Bay . . . . . . . . . . . . . . . . . .

5-18

Post-installation Procedures . . . . . . . . . . . . . . . . . . . . 5-20

Chapter 6 Installing VGA and IDE Drivers

VGA Drivers

.............................

6-1

Installing the Windows Drivers

...............

6-3

Configuring the Drivers

....................

6-3

SetRES

..............................

6-4

IDE Drivers

..............................

6-5

Installing the IDE Drivers

...................

6-5

Chapter 7 Troubleshooting

Identifying Your System

.......................

7-1

The Computer Will Not Start

....................

7-3

The Computer Does Not Respond

.................

7-4

Keyboard Problems

..........................

7-5

Monitor Problems

...........................

7-5

Diskette Problems

..........................

7-6

Diskette Drive Problems

.......................

7-7

Hard Disk Drive Problems

.....................

7-8

Password Problems

..........................

7-9

Software Problems

..........................

7-10

Printer Problems

...........................

7-10

Option Card Problems

........................

7-11

Memory Module Problems

.....................

7-12

Mouse Problems

...........................

7-12

Controller Problems

.........................

7-13

External Cache Problems

......................

7-13

Appendix A Specifications

CPU and Memory

...........................

A-1

Controllers

...............................

A-2

Interfaces

................................

A-2

Physical Characteristics

........................

A-4

Power Supply

.............................

A-4

Option Slot Power Limits (Total)

..................

A-5

Environmental Requirements

....................

A-5

Tested Operating Environments

...................

A-5

Options Available from Epson

....................

A-6

Hard Disk Drive Types

........................

A-8

Connector Pin Assignments

.....................

A-11

Parallel Port Connector (CN3)

.................

A-11

Serial Port Connectors (CN4 and CN5)

............

A-12

Keyboard and Mouse Connectors (CN7 and CN6)

.....

A-12

VGA Port Connector (CN2)

..................

A-13

Altri manuali per ActionDesk 4000

Indice

Altri manuali Epson Scrivania

Epson

Epson QX-10 Manuale utente

Epson

Epson Equity IIe Manuale di installazione e funzionamento

Epson

Epson Progression Manuale utente

Epson

Epson ActionDesk 4000 Manuale utente

Epson

Epson ActionDesk 4000 Manuale utente

Epson

Epson EISA Desktop Dimensioni

Epson

Epson Equity IIe Manuale utente

Epson

Epson EL 486UC+ Manuale utente

Epson

Epson Powerspan Manuale di installazione e funzionamento

Epson

Epson EQUITY II+ Manuale utente

Epson

Epson ActionPC 7300 Manuale di installazione e funzionamento

Epson

Epson Equity 386SX PLUS Dimensioni

Epson

Epson Equity Ie Dimensioni

Epson

Epson Progression 4 Manuale utente

Epson

Epson Progression 4 Manuale utente

Epson

Epson ActionPC 2600 Manuale utente

Epson

Epson EQUITY II+ Dimensioni

Epson

Epson Apex 110 Manuale di installazione e funzionamento

Epson

Epson Equity 386/25 Manuale utente

Epson

Epson Equity 286 PLUS Dimensioni

Epson

Epson EISA Desktop Manuale di installazione e funzionamento

Epson

Epson Equity 386SX/16 PLUS Manuale utente

Epson

Epson Equity 486SX/25 PLUS Manuale di installazione e funzionamento

Epson

Epson ActionDesk 4000 Manuale di installazione e funzionamento

Manuali Scrivania popolari di altre marche

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP Presario SV7000 - Desktop PC Manuale utente

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente