Epson C11CA27201 - WorkForce 40 Color Inkjet... Manuale utente

Network Installation Guide

2Before You Begin

Before You Begin

Make sure you installed ink cartridges and loaded paper as described on the

Start Here sheet. Then follow the instructions in this guide to set up the printer

for use on a network.

Tip:

For a video tutorial and other information on how to connect the printer to your wireless

network, go to: epson.com/support/wireless

Do one of the following:

■If you’re installing the printer for the first time, see below.

■If you’re setting up an additional computer to use the printer on the network,

follow the steps in “Install on Additional Computers” on page 23.

Choose Your Connection Type

Wireless. To make a wireless connection for your printer, see page 3.

Wired. To connect your printer with an Ethernet cable, see page 15.

Wireless Network Installation 3

Wireless Network Installation

To connect your printer wirelessly, you need to know the name (SSID) of your

wireless network. If your network has security enabled, you also need to know the

WEP key or WPA passphrase. Write down this information below:

■Network name (SSID): _________________________________________

■WEP key or WPA passphrase: ____________________________________

This information is stored in your network’s router, and may have been entered

when the router was first set up. If you don’t have this information, contact the

person who set up your network before you begin. You may also be able to log

onto the router from your computer and check its setup screens. See your router’s

instruction manual for details.

Note:

You should also write down whether the WEP key is in ASCII or hexadecimal format. If

the WEP key is 5 or 13 characters, it’s ASCII. If it’s 10 or 26 characters, it’s hexadecimal.

If your router gives you a choice of WEP keys to use, note which one is currently active.

Usually the first WEP key is active, unless you’ve selected a different one.

If your passphrase contains upper- or lowercase letters, be sure to note them correctly.

The printer supports the following wireless security modes: WEP 64, WEP 128, and

WPA-PSK.

Connect the Ethernet Cable

Note:

This is a temporary connection used to configure the printer. You will be prompted to

remove the cable when configuration is complete.

1. Connect an Ethernet network cable to the LAN (10/100) port on your printer.

4Wireless Network Installation

2. Connect the other end to any available LAN port on your router, access point,

or hub.

If you don’t have access to an Ethernet port on your router, access point, or

hub, connect the printer directly to your computer’s Ethernet network port.

Note:

To use this configuration method, your computer must be connected to the

network wirelessly, and your computer’s Ethernet connection must be set to

obtain an IP address automatically.

3. Continue with the steps in the next section to install software.

Wireless Network Installation 5

Install Software

Before starting, make sure the printer is not connected with a USB cable. Only an

Ethernet cable should be connected.

1. Insert the printer software CD.

2. Windows Vista®:If you see the AutoPlay window, click Run EPSETUP.EXE.

When you see the User Account Control screen, click Continue.

Windows XP: When you see the Software Installation screen, continue with

step 3.

Mac OS®X: Double-click the icon.

3. Click Install.

6Wireless Network Installation

4. When you see this screen, select Install driver for network connection and

click Next.

5. Follow the on-screen instructions to install the software for your product.

Note:

These installations take several minutes to complete.

6. Select Set up this printer for the first time, then click Next.

7. Continue with the steps in the next section to configure the printer and add it

to your network.

Wireless Network Installation 7

Configure Network Settings

1. Make sure that the printer is turned on.

2. When you see the FireWall Warning screen, click Next.

3. Make sure you connected the Ethernet cable as described on page 3.

8Wireless Network Installation

4. Do one of the following:

■If the printer is connected to your router, access point, or hub, select

Method 1: Connect via a router/access point (RECOMMENDED).

■If the printer is connected directly to your computer, select

Method 2: Connect directly to the computer (ADVANCED). You’ll

also need to temporarily turn off or disable your computer’s wireless

network connection. (You’ll turn it back on later.)

Important:

Do not select Method 3: Connect with WPS or SES (NOT SUPPORTED).

5. Click Next.

6. If you see a firewall alert message, click Unblock or Allow to let Epson

EasyInstall continue. Do not select Ask Me Later, Keep Blocking, or Block.

Wireless Network Installation 9

Note:

Make sure that you allow network access for Epson EasyInstall. In Windows, verify

that the publisher is SEIKO EPSON, then click Unblock. In Mac OS X, configure

your firewall software to allow network access for Epson EasyInstall.

7. Select the printer you want to configure, then click Next.

Note:

It may take up to 90 seconds for your computer to find the printer on the network.

If your printer doesn’t appear in the list after 90 seconds, make sure that the printer

is turned on and the Ethernet cable is connected as described on page 3. Then

click the refresh button.

8. If you turned off your computer’s wireless network connection in step 4, turn

it back on.

10 Wireless Network Installation

9. Select Wireless (remove Ethernet cable when prompted) as the network

communication type, then click Next.

10. Select your network name (SSID) from the list of available networks, then

click Next.

Note:

If your router or access point doesn’t broadcast its network name (SSID), select

Manually Enter Network Name (SSID) and enter the network name. Click Next.

On the next screen, select your wireless network security type, then click Next.

Altri manuali per C11CA27201 - WorkForce 40 Color Inkjet...

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Epson Stampante

Epson

Epson Stylus Color 850 Manuale utente

Epson

Epson TM-L90 series Manuale di istruzioni

Epson

Epson 980N - Stylus Color Inkjet Printer Manuale d'uso e manutenzione

Epson

Epson Stylus Pro 5500 Manuale utente

Epson

Epson Printer Manuale utente

Epson

Epson R2880 - Stylus Photo Color Inkjet Printer Manuale utente

Epson

Epson ColorPage EPL-C8200 Manuale utente

Epson

Epson U230 - TM Two-color Dot-matrix Printer Manuale utente

Epson

Epson SpectroProofer Mounter 17" Manuale utente

Epson

Epson SureColor F7070 Manuale utente

Epson

Epson Stylus Color 980 Manuale utente

Epson

Epson WF-C20600 Manuale utente

Epson

Epson Stylus Color 980 Manuale utente

Epson

Epson Stylus Pro GS6000 Manuale utente

Epson

Epson WorkForce 60 Guida di riferimento

Epson

Epson TM-T70II Manuale per l'uso e la cura

Epson

Epson SC-F9400H Series Manuale

Epson

Epson AcuLaser M2000D Manuale utente

Epson

Epson Aculaser C9200N Manuale utente

Epson

Epson WorkForce WF-2860DWF Manuale utente

Epson

Epson Stylus Color 777 Guida rapida

Epson

Epson ET-L15150 Series Manuale utente

Epson

Epson LQ-300+II Manuale utente

Epson

Epson WF-3010 Series Manuale di istruzioni

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente