Epson PT-6000 Manuale utente

Questo manuale è adatto per i seguenti modelli

2

Indice

Altri manuali Epson Stampante

Epson

Epson AL-M8250DN Manuale utente

Epson

Epson Stylus C62 Manuale utente

Epson

Epson Stylus Photo 925 Guida all'installazione

Epson

Epson U375 - TM B/W Dot-matrix Printer Manuale utente

Epson

Epson PictureMate Dash PM 260 Manuale utente

Epson

Epson L11160 Series Manuale di istruzioni

Epson

Epson SP7900HDR - Stylus Pro 7900 Color Inkjet... Manuale d'uso e manutenzione

Epson

Epson Stylus Photo 780 Manuale utente

Epson

Epson Epson Stylus NX330 Manuale utente

Epson

Epson L1210 Manuale utente

Epson

Epson FX-980 - Impact Printer Manuale utente

Epson

Epson Stylus pro 7700m Manuale utente

Epson

Epson U300C - TM Dot-matrix Printer Manuale utente

Epson

Epson Stylus Pro 9900 Manuale utente

Epson

Epson STYLUS Stylus C41 Manuale utente

Epson

Epson 4000 - Stylus Pro Color Inkjet Printer Manuale utente

Epson

Epson AcuLaser M4000 Series Manuale utente

Epson

Epson 1520 - Stylus Color Inkjet Printer Scheda tecnica

Epson

Epson TM-T88VI-iHUB Manuale utente

Epson

Epson Stylus CX4300 Series Manuale utente

Epson

Epson Stylus Photo 925 Manuale di istruzioni

Epson

Epson CPD 8882-R1 Guida all'installazione

Epson

Epson SureColor T-Series Manuale di istruzioni

Epson

Epson PX-H8000 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente

PT-6000/DPR-6000/TA-6000 Installation Manual

Installing the PT-6000

The PT-6000 is an optional tray to hold a TM-H6000/H6000II/H6000III printer, especially

when it is used with an IBM®host computer. Because this tray can hold the printer at an angle,

it does not require much space behind it. Therefore, the tray is a valuable space-saving device

for small countertops. The package includes the PT-6000 and 2 sets of affixing tape.

Note:

Before installing the PT-6000, clean any dirt, oil, or other foreign matter off of the countertop or other

surface where the printer will be installed.

Follow the steps below to install the PT-6000. If you are installing the printer on an IBM 469X

series computer with a projection around the host computer, see the other side of this sheet.

1. With 2 pieces of the affixing tape combined, peel off the stickers on one side of the 2 sets of

combined tape, and paste them to the bottom of the PT-6000.

2. Peel off the stickers on the other sides of the affixing tapes, and press the PT-6000 onto the

countertop; it will be held firmly in place by the affixing tapes.

3. Connect the cable and install the printer on the PT-6000, aligning the 4 rubber feet of the

printer with the 4 projections on the PT-6000 shown above.

IBM is a registered trademark of International Business Machines Corporation.

PT-6000

Affixing

tape

Projections

© 2000 Seiko Epson Corporation. All rights reserved.

Printed in China

Using the PT-6000 with an IBM 469X computer with a projection

1. Install the PT-6000 onto the IBM 469X series so that the slot in the PT-6000 fits over the

projection on the host computer. It is not necessary to use the affixing tape.

2. Connect the cable and install the printer, aligning the rubber feet of the printer with the

proper locations on the PT-6000.

Installing the DPR-6000

Set the display module on the DPR-6000, which is also an option for the TM-H6000/H6000II/

H6000III printer and is in a separate package. The package includes the DPR -6000 and 2 bolts

with nuts. Remove the nuts from the bolts, insert the 2 bolts in the places shown below, and

replace the nuts and tighten them. Then attach the DPR-6000 to the host computer.

Installing the TA-6000

If you want to cover the space beside the printer, use the TA-6000, which is provided in a

separate package.

Slot

Projection

Bolt

DPR-6000

Nut

Space TA-6000