Epson Stylus COLOR 3000 Manuale utente

User’s Guide

Printed on recycled paper with at least 10% post-consumer content.

front.fm5 Page i Tuesday, June 10, 1997 9:53 AM

system, or transmitted in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written permission of SEIKO

EPSON CORPORATION. The information contained herein is designed only for use with

this EPSON printer. EPSON is not responsible for any use of this information as applied to

other printers.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of

this product or third parties for damages, losses, costs, or expenses incurred by purchaser

or third parties as a result of: accident, misuse, or abuse of this product or unauthorized

modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to

strictly comply with SEIKO EPSON CORPORATION’s operating and maintenance

instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising

from the use of any options or any consumable products other than those designated as

Original EPSON Products or EPSON Approved Products by SEIKO EPSON

CORPORATION.

EPSON and EPSON Stylus are registered trademarks and EPSON StylusRIP is a trademark

of SEIKO EPSON CORPORATION.

Adobe, PageMaker, PostScript, and the PostScript logo are trademarks of Adobe Systems

Incorporated, which may be registered in certain jurisdictions.

PANTONE is a registered trademark and PANTONE CALIBRATED is a trademark of

Pantone, Inc.

General Notice: Other product names used herein are for identification purposes only and

may be trademarks of their respective owners. EPSON disclaims any and all rights in those

marks.

6/97

front.fm5 Page ii Tuesday, June 10, 1997 9:53 AM

User’s Guide Update

Pantone®professional color palette files for EPSON Stylus®

printers are not currently available as stated in your User’s

Guide. We apologize for any inconvenience this may cause.

They will be available in August of 1997, free of charge, on

EPSON’s World Wide Web site at http://www.epson.com or

by calling (800) 922-8911 and asking for diskettes.

EPSON and EPSON Stylus are registered trademarks and EPSON StylusRIP is a

trademark of SEIKO EPSON CORPORATION.

PANTONE is a registered trademark of Pantone, Inc.

6/97

iii

Contents

Introduction

Special Features 2

Macintosh System Requirements 3

Standalone and Network Environments 4

How To Use Your Manual 6

Cautions, Notes, and Tips 6

Where To Get Help 7

Electronic Support Services 7

1Installing the StylusRIP

Software

Checking the Printer 1-2

Installing StylusRIP Standalone or Print Server Software 1-2

Preparing for Standalone Installation 1-3

Installing on a Standalone or Print Server System 1-4

Installing StylusRIP Client 1-6

Installing the StylusRIP Software License in Your Printer 1-7

Color Matching 1-9

PANTONE Color Support 1-10

ColorSync 2.0 Support 1-10

QuarkXPress Support 1-10

nflight.toc Page iii Thursday, June 5, 1997 10:21 AM

Contents

2Printing with the StylusRIP

Software

Setting Up the StylusRIP Server 2-1

Starting the StylusRIP Server Software 2-4

Starting the StylusRIP Server Software Automatically 2-7

Printing from an Application 2-8

Setting Up the Print Job 2-8

Setting Print Options 2-10

Drag and Drop Printing 2-12

Managing Print Jobs 2-13

Using the StylusRIP Monitor 2-13

3Troubleshooting

Printed images are clipped at the edges 3-1

The printer is producing many pages containing

garbled characters 3-2

One or more colors are missing in your printout or

it prints in black ink only 3-2

You see a memory or VM error message 3-3

You see Font not found or Find font error messages 3-3

You see a Printer cannot be opened or

Printer not found error message 3-4

Index

nflight.toc Page iv Thursday, June 5, 1997 10:21 AM

Introduction

The EPSON® StylusRIP™ software lets you turn your EPSON

Stylus®ink jet printer into a Level 2 PostScript®printer. It

reads the Adobe®Level 2 PostScript files you create on your

Apple®Macintosh,

®turns them into raster images, and prints

them on your printer.

Adobe PostScript is the industry standard for high-quality

graphic output. All the elements in a document—including

text, graphics, and other images—are processed andreproduced

using PostScript code. Then, when you print from an

application such as QuarkXPress,

™the StylusRIP software

creates a raster image from the PostScript code and sends it to

your printer.

EPSON StylusRIP includes a useful “drag and drop” function

that allows you to print just by clicking on a PostScript file icon

(.PS file) and dragging it to the StylusRIP software icon. You

can use StylusRIP with a standalone Macintosh or in a network

environment, as described later in this Introduction.

intro.fm5 Page 1 Thursday, June 5, 1997 10:39 AM

Introduction

Special Features

To take maximum advantage of your EPSON Stylus printer’s

photo-quality output, the StylusRIP software includes these

special features:

◗EPSON error diffusion software, the same high-quality

AcuPhoto™halftoning technology used in EPSON’s

non-PostScript printer drivers

◗PANTONE®professional color palette files—calibrated

for EPSON Stylus printers using various media at various

resolutions—to give you process versions of PANTONE

colors when you use PANTONE-licensed applications

◗ColorSync™2.0 support through International Color

Consortium (ICC) profiles, providing total ICC and

ColorSync compatibility for software applications

intro.fm5 Page 2 Thursday, June 5, 1997 10:39 AM

Introduction

Macintosh System Requirements

To use the StylusRIP software with a Macintosh in either a

standalone or network environment, your system should

include:

◗Centris, Quadra, Power Macintosh,

™or Performa series

Macintosh (standalone only)

◗PowerPC™or 68040 CPU

◗At least 16MB of RAM for the StylusRIP software (20MB

or more is recommended), in addition to the RAM needed

by your operating system and other applications

◗At least 8MB of free hard disk space to install the software

and at least 150MB of free hard disk space for processing

large files

◗Macintosh Operating System 7.5 or later

◗CD-ROM drive

Note:

You cannot use a Performa series Macintosh computer with a

CD-ROM drive as a print server.

To set up a Macintosh as a client on a network using StylusRIP,

it must have the following minimum configuration:

◗Centris, Quadra, Power Macintosh, or Performa series

Macintosh

◗LocalTalk™or Ethernet™connection with the Macintosh

set up as the StylusRIP print server

◗Macintosh Operating System 7.5 or later

intro.fm5 Page 3 Thursday, June 5, 1997 10:39 AM

Introduction

Standalone and Network

Environments

If your Macintosh is not connected to a network, you are using

it as a “standalone” system, with your EPSON Stylus printer

directly connected to your system. Before you install the

StylusRIP software, you must set up your printer and test it

fully; see Chapter 1 for complete instructions.

IfyourMacintosh is connected inanetwork, there are twoways

to use the StylusRIP software, depending on how your network

is configured.

Note:

It is best to choose a Power Macintosh with a fast processor and

ample RAM as your print server, allowing you to devote its

resources to printing the data sent over the network. LocalTalk

networks are not recommended for use with EPSON printers.

In a “direct connection” configuration (as shown below), the

Macintosh that is connected to the printer acts as the print server,

with the StylusRIP Server software installed on it. The other

computers in the network are “clients” of the server, with the

StylusRIP client software installed on them.

serial cable

printer print server

clients

intro.fm5 Page 4 Thursday, June 5, 1997 10:39 AM

Introduction

In the direct connection configuration, the client

Macintosh sends a print job to the print server, which puts

the job in a print queue and then sends it to the printer.

This speeds up transmission of the job because it is sent

over the network only once.

◗In a “typical” network configuration, the print server and

client Macintosh computers are all connected to the printer

via an optional interface card, with the StylusRIP software

(server or client version) installed on all the computers.

In a typical configuration, the print job is sent over the

network twice before it is printed: once from the client to

the printer server and once from the printer server to the

printer.

Note:

You may experience problems if you have more than one printer on

the network in a “mixed” configuration. For example, if you have

one EPSON Stylus printer connected to a serial port and set up as

remote only and another connected via a network interface card on

the same network, you cannot set the network/AppleTalk®control

panel for remote only and Ethernet at the same time.

clients print server

printer optional interface card

intro.fm5 Page 5 Thursday, June 5, 1997 10:39 AM

Altri manuali per Stylus COLOR 3000

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Epson Stampante

Epson

Epson 2000P - Stylus Photo Color Inkjet Printer Dimensioni

Epson

Epson SureColor F9200 Manuale utente

Epson

Epson Stylus C84 Manuale utente

Epson

Epson TM-T20II Manuale utente

Epson

Epson Stylus Color 740 Aggiornamento firmware

Epson

Epson LQ 1050 - B/W Dot-matrix Printer Dimensioni

Epson

Epson Expression Home XP-245 Manuale di istruzioni

Epson

Epson OFFICE 960FWD Manuale utente

Epson

Epson Stylus Color 440 Manuale utente

Epson

Epson 221 Manuale

Epson

Epson WF-2960 Manuale utente

Epson

Epson WorkForce WF-2510 Guida utente

Epson

Epson EPL-6200 Istruzioni di installazione e manutenzione

Epson

Epson ET-4700 Series Manuale utente

Epson

Epson DFX-9000 Istruzioni per il montaggio

Epson

Epson WF-C8690 Manuale utente

Epson

Epson TM-T88V-i Manuale per l'uso e la cura

Epson

Epson EPL-N2750 Manuale utente

Epson

Epson EPL-N7000 Manuale utente

Epson

Epson L382 SERIES Manuale utente

Epson

Epson Stylus Color C80 Manuale di istruzioni

Epson

Epson Stylus Pro 7700 Series Manuale utente

Epson

Epson EPL-N2050 Manuale utente

Epson

Epson U375 - TM B/W Dot-matrix Printer Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente