Epson TM-J9000 Series Manuale utente

User’s Manual

405074707

ii User’s Manual

English

transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or

otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is

assumed with respect to the use of the information contained herein. While every precaution has been

taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for errors or

omissions. Neither is any liability assumed for damages resulting from the use of the information

contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or

third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result

of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to

this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s

operating and maintenance instructions.

Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of

any options or any consumable products other than those designated as Original Epson Products or

Epson Approved Products by Seiko Epson Corporation.

EPSON is a registered trademark of Seiko Epson Corporation in Japan and other countries/regions.

NOTICE: The contents of this manual are subject to change without notice.

DIP Switch Tables

DIP switch 1

SW Function On Off

1-1 Internal use — Fixed to Off

1-2 Reserved — Fixed to Off

1-3 Reserved — Fixed to Off

1-4 Reserved — Fixed to Off

DIP switch 2

Function USB connector side UB series connector side

Interface selection USB available UB series available

TM-J9000/J9100 User’s Manual 1

Standards and Approvals

The following standards are applied only to the printers that are so labeled. (EMC is tested using the

Epson power supplies.)

Europe: CE marking:

North America: FCC/ICES-003 Class A

Oceania: AS/NZS CISPR 22 Class A

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards

of this device.

You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation

could void your authority to operate the equipment.

CE Marking

The printer conforms to the following Directives and Norms:

Directive 2004/108/EC

EN 55022 Class A

EN 55024

IEC 61000-4-2

IEC 61000-4-3

IEC 61000-4-4

IEC 61000-4-5

IEC 61000-4-6

IEC 61000-4-8

IEC 61000-4-11

FCC Compliance Statement For American Users

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which case the

user will be required to correct the interference at his own expense.

For Canadian Users

This Class A digital apparatus complies with Canadian ICES-003.

À l'intention des utilisateurs canadiens

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

2TM-J9000/J9100 User’s Manual

Important Safety Information

This section presents important information intended to ensure safe and

effective use of this product. Read this section carefully and store it in an

accessible location.

Key to Symbols

The symbols in this manual are identified by their level of importance, as

defined below. Read the following carefully before handling the product.

WARNING:

Warnings must be followed carefully to avoid serious bodily injury.

CAUTION:

Cautions must be observed to avoid minor injury to yourself or damage to

your equipment.

Safety Precautions

WARNING:

Shut down your equipment immediately if it produces smoke, a strange

odor, or unusual noise. Continued use may lead to fire. Immediately unplug

the equipment and contact your dealer or a Seiko Epson service center for

advice.

Never attempt to repair this product yourself. Improper repair work can be

dangerous.

Never disassemble or modify this product. Tampering with this product may

result in injury or fire.

Be sure to use the specified power source. Connection to an improper

power source may cause fire.

Do not allow foreign matter to fall into the equipment. Penetration by

foreign objects may lead to fire.

If water or other liquid spills into this equipment, do not continue to use it.

Continued use may lead to fire. Unplug the power cord immediately and

contact your dealer or a Seiko Epson service center for advice.

Be sure to use the specified power source. Connection to an improper

power source may cause fire.

Do not use aerosol sprayers containing flammable gas inside or around this

product. Doing so may cause fire.

TM-J9000/J9100 User’s Manual 3

English

CAUTION:

Do not connect cables in ways other than those mentioned in this manual.

Different connections may cause equipment damage and burning.

Be sure to set this equipment on a firm, stable, horizontal surface. Product

may break or cause injury if it falls.

Do not use in locations subject to high humidity or dust levels. Excessive

humidity and dust may cause equipment damage or fire.

Do not place heavy objects on top of this product. Never stand or lean on

this product. Equipment may fall or collapse, causing breakage and

possible injury.

Take care not to injure your fingers on the manual cutter

• When you remove printed paper

• When you perform other operations such as loading/replacing roll paper

To ensure safety, unplug this product before leaving it unused for an

extended period.

Before moving the product, unplug it and unplug all cables connected to

it.

If ink leaks out of the printer, wipe up the ink with a cloth or similar material

immediately and contact your dealer or a Seiko Epson service center for

advice.

Notes on Usage

❏When using the printer, do not open the covers.

❏Protect the printer from impact.

❏Do not apply excessive force to the printer case.

❏Do not place food or beverages such as coffee on the printer case.

Notes on Installation

❏Be sure that the printer is installed horizontally.

❏Do not install the printer in a dusty place.

❏Install the printer away from magnetic devices.

❏Cables or other foreign objects must not be caught on the printer.

❏Because cards are ejected toward the back of the printer, allow at least

60 mm {2.36} behind the printer when installing it.

4TM-J9000/J9100 User’s Manual

English

Notes on Transportation

❏Remove the ink cartridge before transporting the printer. After

transportation, install a new ink cartridge.

❏Keep the printer upright and horizontal during transportion.

❏Be sure not to ship ink cartridges that have been removed from the

packing. Ink may leak.

Restriction of Use

When this product is used for applications requiring high reliability/

safety, such as transportation devices related to aviation, rail, marine,

automotive, etc.; disaster prevention devices; various safety devices, etc.;

or functional/precision devices, etc.; you should use this product only

after giving consideration to including fail-safes and redundancies into

your design to maintain safety and total system reliability. Because this

product was not intended for use in applications requiring extremely high

reliability/safety, such as aerospace equipment, main communication

equipment, nuclear power control equipment, or medical equipment

related to direct medical care, etc., please make your own judgment on

this product’s suitability after a full evaluation.

Purpose of This Manual

This manual describes basic operations for operators of the single color

(black ink) TM-J9000 printer, and the two color (black and red/green/

blue) TM-J9100 printer to enable safe and correct use of the printer.

Unpacking

The following items are included for the standard specification printer. If

any item is damaged, contact your dealer.

❏Printer ❏Roll paper

❏Ink cartridge ❏User’s Manual (this manual)

❏Power switch cover ❏Feeder guide

❏Instruction sheet ❏Ink cartridge manual

❏Pocket (only for the ASF model)

TM-J9000/J9100 User’s Manual 5

English

Part Names

Note:

DIP Switch 2 is intended for switching the interface. Do not change the position

of the DIP switch 2 except when changing the interface.

Hooking the USB cable on the locking wire saddle prevents the cable from

falling off.

Attaching the Feeder Guide

Feeding paper using the included feeder guide allows you to insert a

check straight. Also, the auto sheet feeder (ASF) model printers can feed

up to 25 checks without manual feeding.

Follow these steps to attach the feeder guide.

1. Hold the edge of the feeder guide carefully.

Validation section

Power switch

Card entrance

Scanner

Control panel

Roll paper section

Feeder

Roll paper cover

open button

Cartridge cover tab

USB connector

ng w

re sa

ddl

DIP switch 2

Power supply connector

6TM-J9000/J9100 User’s Manual

English

2. Insert the dowels of the feeder guide into the holes on the feeder

guide; then move it down until it stops in place.

Attaching the Pocket (only for the ASF model)

A pocket is provided with each auto sheet feeder (ASF) model printer.

Follow the steps shown below to attach the pocket.

1. Push down the pocket cover on the left of the printer, and remove it.

Note:

To attach the cover again, insert the cover while pushing it up.

2. Make sure that the ejection lever is open. If it is closed, open it.

Note:

Be careful not to hurt your fingers on the lever edge.

➀

➁

Dowel of the feeder guide

The ejection lever is open. The ejection lever is closed.

TM-J9000/J9100 User’s Manual 7

English

3. Position the pocket as shown in the picture below, and push it into the

printer until it clicks in place.

4. Unfold the stopper of the pocket as shown in the following picture.

Note:

To remove the pocket, place the printer vertically as shown in the picture

below; then while pushing up the lever on the bottom of the pocket, slightly

push the pocket backward, and then pull it up.

Insert the hooks on the four corners of the

pocket into the holes indicated with the

circles, and move the pocket into place.

➁

➀

Stopper

➀

➁

Push up the lever.

8TM-J9000/J9100 User’s Manual

English

Control Panel (LEDs and Buttons)

POWER LED

❏Comes on when the printer power is on.

❏Flashes during cleaning and other operations, such as power-on and

power-off.

Note:

Never open a cover or turn off the printer while the POWER LED is flashing.

ERROR LED

❏Comes on when the printer is off line (and when the roll paper is out,

or the printer cover is open.)

❏Flashes when an error occurs. (See the “Troubleshooting” (on page 22

of this manual) for more information.)

INK LED

❏Flashes when ink is low. (You can continue printing.)

❏Comes on when no ink cartridge is installed or it is time to replace the

ink cartridge. (The printer goes off line, and the ERROR LED comes

on.)

Note:

The TM-J9000 has an INK LED for BLACK only, whereas the TM-J9100 has

LEDs for both BLACK and COLOR.

To insure print quality, some ink remains in the cartridge after the INK LED

comes on.

PAPER OUT LED

Comes on when the roll paper is out or almost out.

VALIDATION/FEEDER LED

❏Comes on when the printer is ready to process checks.

❏Flashes when the printer is waiting for check insertion or removal.

POWER LED POWER LED

ERROR LED

INK LED (Black)

PAPER OUT LED

VALIDATION/

FEEDER LED

ID LED

(Unused)

ERROR LED

INK LED (Black)

PAPER OUT LED

VALIDATION/

FEEDER LED

ID LED

INK LED (Color)

(TM-J9100) Two color model (TM-J9000) Single color model

Altri manuali per TM-J9000 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Epson Stampante

Epson

Epson LX-810 Dimensioni

Epson

Epson LQ-870 Manuale utente

Epson

Epson 50 - Artisan 50 - Printer Manuale utente

Epson

Epson WorkForce WF-M1030 Manuale utente

Epson

Epson PictureMate 238 Manuale utente

Epson

Epson Stylus NX510 Manuale utente

Epson

Epson Stylus DX3800 Series Manuale di istruzioni

Epson

Epson TM-L90 series Manuale di istruzioni

Epson

Epson SP4000 Manuale di istruzioni

Epson

Epson Stylus Pro 7890 Series Manuale utente

Epson

Epson L455 Manuale di istruzioni

Epson

Epson WF-C878RDWF Manuale utente

Epson

Epson CR-420i Dimensioni

Epson

Epson SC-F6200 Series Manuale utente

Epson

Epson MX-80 IIIF/T Manuale utente

Epson

Epson Stylus CX3100 Manuale utente

Epson

Epson C390999 - TM T90 Color Thermal Line Printer Manuale utente

Epson

Epson Stylus COLOR 460 Manuale utente

Epson

Epson SC-P8550D Series Manuale utente

Epson

Epson 740 Series Manuale

Epson

Epson Stylus Pro 7900 Manuale utente

Epson

Epson FX-1170 Manuale utente

Epson

Epson Stylus Photo PX820FWD Istruzioni per il montaggio

Epson

Epson TM-T90 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente