Epson U325PD - TM B/W Dot-matrix Printer Manuale utente

TM-U325D/U325PD

User’s Manual

400665704

Printer Parts and Labels

Labels

CAUTION/ VORSICHT:

Print head cover and print head are hot.

Druckkopfabdeckung und Druckkopf sind heiß.

CAUTION/ VORSICHT:

Caution label for drawer kick-out connector.

Vorsichtsetikett für Schnappsteckerbuchse.

EPSON/U325 Printer - File: PRNTR_8.

W. Swanlund REV> 14Octobe

14 25

RECEIPT

OUTVALIDA

TION

POWER

ERROR

FEED

RELEASE

EPSON

Control panel

Printer cover

On/Off switch

RECEIPT

OUT VALIDATION

POWERERROR

FEED

RELEASE

Control panel

Serial interface connector

Parallel interface connector

CUT

SET

CLOSE THE

PRINTER COVER

or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,

or otherwise, without the prior written permission of Seiko Epson Corporation. No patent

liability is assumed with respect to the use of the information contained herein. While every

precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes no

responsibility for errors or omissions. Neither is any liability assumed for damages resulting

from the use of the information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product

or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as

a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or

alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson

Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable against any damages or problems arising from the

use of any options or any consumable products other than those designated as Original Epson

Products or Epson Approved Products by Seiko Epson Corporation.

EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation.

NOTICE: The contents of this manual are subject to change without notice.

EMC and Safety Standards Applied

Product Name: TM-U325D/TM-U325PD

Model Name: M133A

The following standards are applied only to the printers that are so labeled. (EMC is tested

using Seiko Epson’s AC Adapter.)

Europe: CE marking

Safety: EN 60950

North America: EMI: FCC/ICES-003 Class A

Safety: UL 1950/CSA C22.2 No. 950

Oceania: EMC: AS/NZS CISPR22 Class B

WARNING

The connection of a non-shielded printer interface cable to this printer will invalidate the EMC

standards of this device.

You are cautioned that changes or modifications not expressly approved by SEIKO EPSON

Corporation could void your authority to operate the equipment.

CE Marking

The printer conforms to the following Directives and Norms:

Directive 89/336/EEC EN 55022 Class B

EN 55024

IEC 61000-4-2

IEC 61000-4-3

IEC 61000-4-4

IEC 61000-4-5

IEC 61000-4-6

IEC 61000-4-11

FCC Compliance Statement

For American Users

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interference at his own

expense.

For Canadian Users

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

GEREÄUSCHPEGEL

Gemäß der Dritten Verordnung zum Gerätesicherheitsgesetz (Maschinenlärminformations-

Verordnung-3. GSGV) ist der arbeitsplatzbezogene Geräusch-Emissionswert kleiner als 70

dB(A) (basierend auf ISO 7779).

iii

About This Manual

Setting Up and Using

❏Chapter 1 contains information on unpacking the printer, setting it up, attaching

the paper roll near-end sensor, and setting the DIP switches.

❏Chapter 2 contains information on using the printer.

❏Chapter 3 contains troubleshooting information.

Reference

❏Chapter 4 contains specifications and character code tables.

Warnings, Cautions, and Notes

WARNING / WARNUNG:

Warnings must be followed carefully to avoid serious bodily

injury.

Warnhinweise müssen sorgfältig befolgt werden, um Unfälle

mit möglicherweise schweren Verletzungen zu vermeiden.

CAUTION / VORSICHT:

Cautions must be observed to avoid minor injury to yourself or

damage to your equipment.

Vorsichtshinweise müssen sorgfältig befolgt werden, um

Unfälle mit der Gefahr leichter Verletzungen oder Schäden

am Gerät zu vermeiden.

Note:

Notes have important information and useful tips on the operation of your

printer.

Introduction

Features

The TM-U325D and TM-U325PD are high-quality POS printers that can print a

multiple-line validation and on receipt paper (paper roll). The printer has the

following features:

❏Easily changeable interface specifications for serial or parallel by exchanging the

interface board.

❏Excellent reliability (long life) and good operability (drop-in paper loading).

❏Multiple-line validation printing (possible to print a maximum of 9 lines).

❏Compact and light in weight.

❏High-speed printing through logic-seeking control.

❏Excellent reliability and long life due to adoption of stepping motor, both for

moving the carriage and for paper feeding.

❏Flexible line space setting permits printing in accordance with any user-defined

format.

❏Conforms with ESC/POS; excellent universality of control.

❏Built-in drawer kick-out interface provides capability to drive two drawers.

❏Selectable character fonts (7 ×9 and 9 ×9).

❏Semi-automatic paper loading capability.

❏AC adapter provides compact power supply.

❏Automatic status back (ASB) function that automatically transmits changes in

printer status.

Accessories

❏AC adapter

❏EPSON ribbon cassette, ERC-38

Options

❏EPSON power supply unit, PS-180

❏Printer fastening tape (Model No. DF-10)

Setting Up the Printer 1–1

Chapter 1

Setting Up the Printer

Unpacking

The illustration below shows the items included for the standard

specification printer.

(*1) The power cord may not be included in the package. If it is not, make sure to use a

power cord that complies with the safety standards.

If any item is damaged, please contact your dealer for assistance.

Selecting a Location

Place the printer on a surface that is as horizontal as possible. Make

sure that the printer does not tilt more than 15 degrees.

The printer should be installed so that it does not move or vibrate

during paper cutting or the drawer kick-out operation.

Fastening tape is available as an option.

Manual

RECEIPT

OUTVALIDA

TION

POWER

ERROR

FEED

RELEASE

EPSON

Printer

Power supply

Spacers for the paper roll

near-end sensor 2 pcs

Power switch cover

Ribbon cassette Paper roll

1–2 Setting Up the Printer

Adjusting the Paper Roll Near-End Sensor

Notes:

Use paper rolls with an inner core diameter of 10.5 to 12.5 mm so

that the sensor detects the remaining paper correctly.

When the last portion of a paper roll bears red markings, the

marking is sometimes an adhesive that pulls the entire paper roll up.

In this case, the sensor may not detect the remaining paper correctly.

If a paper roll easily becomes loose because of the quality of the paper

or other factors, incorrect detection of the paper end may result.

1. Make sure that the power supply is disconnected from the printer.

2. Two spacers are included. See the illustration below and decide

whether or not you want to use them. Use them if you want the

near-end sensor to be triggered when distance A is 3 to 4 mm;

otherwise it will be triggered when distance A is approximately

6mm.

3. Secure the paper roll near-end sensor (and spacers) with two

screws. When you insert the spacers, be sure you set the

spacers in the direction shown in the illustration.

Distance A

Setting Up the Printer 1–3

4. Check to be sure that the detecting lever moves freely.

Connecting the Cables and Grounding the Printer

You can connect up to three cables and a grounding wire to the

printer. They all connect to the connector panel on the bottom of

the printer, which is shown below:

Notes:

There is a caution label beside the drawer kick-out connector.

Depending on the interface installed, the interface connector on your

printer may look different from the one illustrated.

Before connecting any of the cables, make sure that both the printer

and the computer are turned off.

Spacers Paper roll

near-end sensor

Power supply

Drawer kick-out

Interface

Grounding screws

1–4 Setting Up the Printer

Connecting the Computer

1. Plug the cable into the connector on the printer and tighten the

screws on both sides of the cable connector, as shown.

2. Connect the other end of the cable to the connector on your

computer.

Connecting the Drawer

WARNING:

Use a drawer that matches the printer specification. Using an

improper drawer may damage the drawer as well as the

printer.

CAUTION:

Do not connect a telephone line to the drawer kick-out

connector; otherwise the printer and the telephone line may

be damaged.

Plug the drawer cable into the drawer kick-out connector on the

bottom of the printer next to the power supply connector.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Epson Stampante

Epson

Epson Stylus C44 Aggiornamento firmware

Epson

Epson EcoTank ET-8500 Series Manuale utente

Epson

Epson SC-T7000 series Manuale utente

Epson

Epson SC-F10030H Series Manuale utente

Epson

Epson STYLUS COLOR 700 Manuale utente

Epson

Epson WF-2930 Manuale di istruzioni

Epson

Epson ActionPrinter 3000 Manuale utente

Epson

Epson Aculaser M2000 series Manuale utente

Epson

Epson WF-100 Manuale di istruzioni

Epson

Epson Stylus C82 Manuale utente

Epson

Epson Small-in-One XP-520 Manuale utente

Epson

Epson ET-M16600 Series Manuale di istruzioni

Epson

Epson WF-C5790DWF Manuale utente

Epson

Epson SureColor SC-S70600 Manuale

Epson

Epson EPL-5700 Manuale utente

Epson

Epson SC-P8500D Series Manuale utente

Epson

Epson Aculaser CX28DN Series Manuale utente

Epson

Epson Disc Producer PP-100AP Manuale utente

Epson

Epson Expression Home XP-212 Manuale utente

Epson

Epson EPL-5900L Manuale

Epson

Epson TM-H6000V Manuale utente

Epson

Epson Stylus Color 880 Manuale utente

Epson

Epson L1300 Manuale di istruzioni

Epson

Epson Stylus CX4100 Series Manuale di istruzioni

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente

Ricoh

Ricoh Aficio AP400 Manuale utente

BIXOLON

BIXOLON SRP-352plusV Manuale utente