Epson EMP-6100 Manuale utente

EMP Monitor

Operation Guide

Meanings of symbols used

Indicates something that may cause injury or damage to the projector.

Indicates information that is related to a topic or which may be useful to know.

Indicates a page where a related topic or more a detailed explanation is provided.

[ (Name) ] Indicates the name of a projector port or a computer menu or item name.

Example: [InputA] [Start]

CAUTION

TIP

Contents

Meanings of symbols used 1

Operating Environment 3

Compatible computers ............................................................ 3

Before starting operations .......................................................3

Registering projectors for monitoring 4

Registration using automatic detection ................................... 5

Registration using IP address (Manual registration) ............... 6

Editing the manually-registered projector list .......................... 7

Deleting a projector from the projector list............................... 7

Main EMP Monitor window 8

Button functions....................................................................... 8

Understanding the projector list............................................... 9

Displaying detailed information ............................................. 10

A projector cannot be monitored or controlled using

EMP Monitor 11

Appendices 12

Operating Environment

You can display status information on a computer screen for multiple

projectors that are connected to a network and also carry out batch operations

on all projectors such as turning the power on and off and changing the image

source. A maximum of 64 projectors can be monitored and controlled by batch

operations.

System configuration example

Compatible computers

* Macintosh computers cannot be used.

Before starting operations

Check the following points before starting up EMP Monitor.

• EMP Monitor must be installed in the computer to be used for monitoring

and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000, NT4.0 or XP, the computer must be started up in

Administrator mode.

(When using EMP-81/61)

• To use EMP Monitor, an adapter and cable for conversion are required.

sUser's Guide "Standby mode"

• You need to make a setting for the adapter before connecting it to the

projector. sThe adapter's documentation

Refer to the "Appendices" for details about the adapter setting. sp.12

Projector A

Projector B

Projector C

Turn on

projector B

EMP Monitor

TIP

If the projector's "Network Monitoring" or "Standby Mode"

configuration menu is set to "ON" or "Network ON", the projector

can still be monitored when it is in standby mode (when the (Power)

indicator is lit orange).

OS* 98SE/Me/NT4.0/2000 Professional/XP Home Edition/XP

Professional

CPU Pentium MMX 166 MHz or higher (Pentium II 233 MHz

or higher recommended)

Memory

capacity

64 MB or more (128 MB or more recommended)

Free hard disk

space

6 MB or more

Display XGA (1024×768) or higher resolution, 16 bit or higher

display colour

Registering projectors for monitoring

This operation is carried out when starting EMP Monitor for the first time after

it has been installed and when you would like to add projectors. Once a

projector has been registered, the status for the projector will be displayed

automatically each time EMP Monitor is started from that point onwards.

PROCEDURE

Click [Start] - [Programs] (or [All Programs]) - [EPSON

Projector] - [EMP Monitor] in that order to start EMP

Monitor.

Click [Register projector].

The [Register projector] dialogue box will be displayed.

Use the "Registration using automatic detection" (sp.5) or

"Registration using IP address (Manual registration)" (sp.6)

procedure to register projectors.

Click to add a projector to be monitored

Registering projectors for monitoring

Registration using automatic detection

PROCEDURE

Click [Auto detect] in the [Register projector]

dialogue box.

Select the projector(s) to be registered, and then click

[Add].

You can select several projectors at the same time.

If a projector does not appear in the list, use "Registration using

IP address (Manual registration)". sp.6

Click [Close] to return to the main EMP Monitor

window.

Refer to "Main EMP Monitor window" for details on using the

main window. sp.8

TIP

• Projectors that have been registered using automatic detection will be

re-detected on the basis of projector name and the IP addresses for

these projectors will be displayed each time EMP Monitor is started.

• If a password entry screen is displayed, enter the password for the

projector's Administrator and then click [OK].

If more than one projector was selected, the password entry screens

for each projector will be displayed in succession.

Registering projectors for monitoring

Registration using IP address (Manual registration)

PROCEDURE

Click [Manual registration] in the [Register projector]

dialogue box.

Enter the IP address for the projector to be registered

in the [IP address] box, and then click [Confirm].

If a projector with the specified IP address is found on the

network, the projector's name will be displayed, so check that it

is the target projector. If it is not the target projector, re-enter

the IP address.

When using EMP-81/61

The following "Manually register projector" window will be

displayed.

Complete the form and click [Confirm].

Click [Add].

Projector name Enter the projector name of up to 16

alphanumeric characters, from 0 to 9

and from A(a) to Z(z) and - . You cannot

use a numeric-only name.

IP address Enter the IP address of the projector.

Use Serial⇔TCP/IP

conversion adaptor.

Check the box.

Port Number Enter the port number.

Enter the projector name.

Enter the IP address.

Enter the port number.

Click to check the box.

TIP

If a password entry screen is displayed, enter the password for the

projector's Administrator and then click [OK].

Registering projectors for monitoring

Editing the manually-registered projector list

Use the following procedure to change the projector name or IP address for

projectors that have been registered manually.

PROCEDURE

Select the projector to be edited in the [Register

projector] dialogue box, and then click [Edit].

If the projector name has changed, simply click

[Confirm].

If the IP address has changed, enter the new IP

address and then click [Confirm].

Check that the projector name is correct.

Click [Update].

Deleting a projector from the projector list

Select the projector to be deleted from the list in the

[Register projector] dialogue box, and then click [Delete].

More than one projector can be selected at the same time.

Main EMP Monitor window

The main window shows the status information for each projector. To carry

our operations for projectors, select the projectors from the projector list and

then click the buttons.

To close the window, click the in the top-right corner.

Button functions

The power can be turned on or off and the input source can be changed for

the projectors that are selected from the projector list. The same operations

can also be carried out using the commands in the [Tools] menu.

Buttons

Projector list

Detail display Shows detailed information for the selected projectors.

Power ON Turns the projector power on.

Power OFF Turns the projector power off.

PC1,

InputA

Switches to the input source connected to the

[Computer] port, [Computer1] port or [InputA] port.

PC2,

InputB

Switches to the input source connected to the

[Computer2] port or [InputB] port.

BNC Switches to the input source connected to the [BNC]

port.

S-Video Switches to the input source connected to the

[S-Video] port.

Video Switches to the input source connected to the [Video]

port.

D4 Switches to the input source connected to the [D4]

port.

DVI,

HDMI

Switches to the input source connected to the [DVI]

port or [HDMI] port.

EasyMP Switches to EasyMP or EasyMP.net.

TIP

Some connected projectors may not be equipped with all of the above

ports or functions. If you click a button for a port or function that is

not available, nothing will happen.

Main EMP Monitor window

Understanding the projector list

The projector list uses the following icons to show the projector statuses.

The projector information that is generated when a problem is detected is

stored until EMP Monitor is closed. The EMP Monitor displays will not be

updated automatically even if the projector status returns to normal. Click

[Refresh] in the main window to update the status.

Status: Shows the projector status.

Power on and normal status

Power off and normal status

Power on and abnormal status

Power off and abnormal status

Network error (such as not connected to network or

power cord not connected)

Name: Shows the projector name.

Source: Shows the selected image source.

Computer, Computer1 or InputA

Computer2 or InputB

S-Video

Video

D4 (Digital)

DVI or HDMI (Digital)

Error information: Uses the following icons to show the status if an

error occurs with a projector.

End of lamp life warning

Replace with a new lamp.

s"Replacing the Lamp"

in the "Replacing

Consumables" section of

the accessory User's Guide.

Lamp problem "Reading the Indicators"

sRefer to the

"Troubleshooting" section

of the accessory User's

Guide and carry out the

suggested remedy.

High internal temperature

(overheating)

Temperature warning

Internal problem

Fan problem

Temperature sensor

problem

Altri manuali per EMP-6100

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Epson Software

Epson

Epson PhotoPC 700 Manuale utente

Epson

Epson Stylus Color 900 Manuale utente

Epson

Epson 4000 - Stylus Pro Color Inkjet Printer Manuale utente

Epson

Epson Artisan EMP-830/EMP-835 Manuale utente

Epson

Epson BrightLink 455Wi Dimensioni

Epson

Epson 1280 - Stylus Photo Color Inkjet Printer Manuale utente

Epson

Epson MACLQ (Talk I/F for LQ Printers) Manuale utente

Epson

Epson 2200 - Stylus Photo Color Inkjet Printer Foglio di istruzioni

Epson

Epson PowerLite 1880 Manuale utente

Epson

Epson EasyMP Multi PC Projection Manuale utente

Epson

Epson Progression NX Dimensioni

Epson

Epson PowerLite 4650 Manuale utente

Epson

Epson 836XL - Expression - Flatbed Scanner Manuale utente

Epson

Epson Perfection 1200s Manuale utente

Epson

Epson PowerLite 84+ Manuale utente

Epson

Epson EMP Link 21L Manuale utente

Epson

Epson Stylus Pro 7600 Photographic Dye Ink Dimensioni

Epson

Epson PowerLite Pro G5450WU Manuale utente

Epson

Epson ChromaBlast v1.0 Manuale utente

Epson

Epson PowerLite Pro Z8250NL Manuale utente

Epson

Epson M00002104 Manuale

Epson

Epson 4012033-00 XXX Manuale utente

Epson

Epson Stylus Pro - Stylus Color Pro Ink Jet... Manuale utente

Epson

Epson PowerLite Pro G5650WNL Manuale utente

Manuali Software popolari di altre marche

COMPRO

COMPRO COMPROFM Manuale utente

Muratec

Muratec OFFICEBRIDGE ONLINE Manuale utente

Oracle

Oracle Contact Center Anywhere 8.1 Manuale utente

Adobe

Adobe 65007312 - Photoshop Lightroom Manuale

Avaya

Avaya NULL One-X for RIM Blackberry Manuale utente

HP ProLiant BL420c Manuale utente

PS Audio

PS Audio PowerPlay Manuale del proprietario

Brady

Brady LOCKOUT PRO 3.0 Manuale di servizio

Avaya

Avaya Interaction Center Manuale utente

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuale

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuale utente

Oracle

Oracle Application 9i Manuale utente

Acer

Acer RDM Manuale utente

Canon

Canon Vixia HF21 Manuale utente

Canon

Canon ZR950 Manuale utente

Samsung

Samsung Auto Backup Manuale utente

Polycom

Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuale utente