Epson Stylus Pro 10000 Series Manuale utente

Fiery Spark™Professional

EPSON Stylus®Pro 5500

EPSON Stylus®Pro 10000

Installation Guide

Printed on recycled paper.

ii |

transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or

otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The

information contained herein is designed only for use with these EPSON printers. EPSON is not

responsible for any use of this information as applied to other printers.

Trademarks

EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION.

EPSON Preferred is a service mark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may

be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

Legal Notices

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of

this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third

parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications,

repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with

SEIKO EPSON CORPORATION’s operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from

the use of any options or any consumable products other than those designated as Original

EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.

Part Number: CPD-12826

Printed in USA 8/01

|iii

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Where To Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Windows Client Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Macintosh Client Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Server Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing the Fiery Spark Server Software . . . . . . . . . . . . . . . . . . . . . . . 4

Installing Command WorkStation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Enabling File and Printer Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Enabling AppleTalk Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Hardware Key Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Windows Client Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing the PostScript Printer Driver for Windows Me . . . . . . . . . . . 8

Installing the PostScript Printer Driver for Windows 2000 . . . . . . . . . . 9

Creating Shortcuts to the Fiery Spark Drop Folders . . . . . . . . . . . . . . 11

Installing Command WorkStation . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Macintosh Client Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Installing Printer Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Installing Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Creating Shortcuts to the Fiery Spark Drop Folders . . . . . . . . . . . . . . 15

Installing Fiery Spooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Installing Fiery Downloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Installing ColorWise Pro Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Selecting TCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Printing to the Fiery Spark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Introduction

This guide provides basic installation instructions for the Fiery Spark™

Professional software in a client-server configuration. Fiery Spark Professional

includes a System Software CD-ROM, a User Software CD-ROM, and a USB

hardware key.

For instructions on using the Fiery Spark software, see the manuals in the

Documentation > English folder on the User Software CD-ROM. You have a

Getting Started Guide, Configuration Guide, Printing Guide, Job Management

Guide, and Color Guide.

These manuals are in PDF format. If you don’t have Adobe®Acrobat®Reader™

for viewing the manual, you can install it by double-clicking the ar405eng

icon in the Documentation folder on the User Software CD-ROM.

Where To Get Help

EPSON provides technical support and information on the installation,

configuration, and operation of professional graphics arts products through the

EPSON Preferred Protection Plan. Call (888) 377-6611, 6 AM to 8 PM, Pacific

Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday.

Before you call, make sure you have your Unit ID number, which is included

with the EPSON Preferred Protection Plan information that came with your

printer. You’ll also need your printer serial number and proof of purchase. If

you experience difficulty using your Unit ID number when accessing the

toll-free EPSON Preferred phone number, please call (562) 276-1305 in the

U.S. or (905) 709-2567 in Canada during normal business hours.

Note Do not misplace your hardware key. Lost keys are not covered under

your warranty.

Note If you are using the EPSON®Color Calibrator, make sure you are

using software version 2.1 or later. This version can be downloaded

from http://support.epson.com.

2|Installation Guide

EPSON also provides technical assistance 24 hours a day through the World

Wide Web. You can reach EPSON Support at http://support.epson.com. At

this site, you can download drivers and other files, look at product

documentation, access troubleshooting information, and receive technical

advice through e-mail.

System Requirements

Before you install the software, make sure your computer meets the minimum

system requirements listed below.

Server

•Pentium®4 1.2GHz (1.7GHz recommended)

•Windows®2000 Professional

•256MB RAM (512MB RAM recommended)

•At least 200MB free hard disk space to install the software and at least 1GB

free disk space for processing files (4GB or more available hard disk space

recommended)

•USB connection for EPSON Stylus®Pro 5500 or IEEE-1394 PCI card

(OHCI compliant) connection for EPSON Stylus Pro 10000

•Netscape®Communicator®version 4.5 or 4.7 with Java enabled, or

Microsoft®Internet Explorer version 5.0 or 5.5 with Java enabled, for

Fiery WebTools

•A TCP/IP-enabled network and the IP address or computer name for the

Fiery Spark server

•File and Printer Sharing for Microsoft Network enabled for PC clients

•AppleTalk®Protocol enabled for Macintosh clients

Note Windows 2000 Server is recommended if you have more than

10 users printing concurrently, require support for SMP with more

than 2 CPUs, or require greater fault tolerance

Macintosh Client Computer |3

Windows Client Computer

•Pentium II processor (Pentium III or higher recommended)

•Windows 98, Me, 2000, or Windows NT®4.0 with Service Pack 5 or later

•128MB RAM (256MB or more recommended)

•PostScript®printer driver for Windows

•Windows 98 and Me: Adobe PostScript Printer Driver version 4.3.1

•Windows 2000: Microsoft PostScript Printer Driver for Windows

2000 (included with the Windows 2000 operating system)

•Windows NT: Adobe PostScript Printer Driver version 5.1.2

•For Windows 98 and Me, you also need TCP/IP networking protocol

enabled

•For Windows NT 4.0 and Windows 2000, you also need TCP/IP or

AppleTalk networking protocol enabled

Macintosh Client Computer

•Macintosh®G3, G4, or iMac™(G4 recommended)

•System 8.6 through 9.1

•450MHz or faster processor

•256MB RAM (512MB recommended)

•AppleTalk networking protocol enabled

4|Installation Guide

Server Software Installation

Before you begin, make sure you’ve:

•Connected the printer to the server

•Installed the EPSON printer driver (see your EPSON printer

documentation for instructions)

•Installed the IEEE-1394 driver if you’re using the EPSON Stylus

Pro 10000 (the driver is on the CD-ROM that came with your printer; for

installation instructions, see the Product Support Bulletin at

http://support.epson.com)

•Closed all open programs and turned off any virus protection programs.

Install the following software on the server:

•Fiery Spark Server software (see below)

•Command WorkStation (page 5)

Installing the Fiery Spark Server Software

Follow these steps:

1. Insert the Fiery Spark System Software CD-ROM in your CD-ROM or

DVD drive.

2. Double-click My Computer, then double-click the CD-ROM

icon.

3. Double-click the Setup icon in Fiery folder, then click Next.

4. Follow the on-screen instructions.

Note Use a short server name (8 characters or less). Otherwise, you won’t

be able to see the server name and print queue in the Chooser on

Macintosh clients.

Do not install the hardware key until after all the software is installed.

Installing Command WorkStation |5

5. When you see this screen, select your printer model; then click Next to

continue the installation.

6. Click OK at the end of the installation. Your computer restarts.

Installing Command WorkStation

This installation also installs ColorWise Pro Tools and Fiery Downloader.

Follow these steps:

1. On the Fiery Spark User Software CD-ROM, open the CStation folder.

2. Double-click the Setup icon.

3. Follow the instructions on screen.

4. Click Finish at the end of the installation. Your computer restarts.

5. Configure Command WorkStation as described in the next section.

6|Installation Guide

Configuring Command WorkStation

1. If Command WorkStation is open, click OK.

Otherwise, go to Start > Programs > Command WorkStation, then

click Command WorkStation.

2. Enter the appropriate information for the Fiery Spark, then click Add:

3. Make sure the printer name is selected in the Devices list, then click OK.

4. Select the printer name in the list

of Available Servers, then click OK.

enter PRO10K for the

Stylus Pro 10000 (dye

ink), PRO10KCF for

the Stylus Pro 10000

(pigment ink), or

PRO5500 for the

Stylus Pro 5500

the Nickname can be

different from the Fiery

Spark server name, but

cannot contain

[ ] _ " ' <space> <tab>

This example uses

EPSON as the

nickname.

enter localhost

click Add

Enabling AppleTalk Protocol |7

Enabling File and Printer Sharing

If you have Windows clients, you must enable File and Printer Sharing on the

server. Follow these steps:

1. From the Control Panel, double-click Networks and Dial-up

Connections, then double-click Local Area Connection.

2. Click the Properties button.

3. Click Install.

4. Click Service, then click Add.

5. Select File and Printer Sharing for Microsoft Networks, then click OK.

6. Close any open windows, then restart your computer.

Enabling AppleTalk Protocol

If you have Macintosh clients, you must enable AppleTalk Protocol on the

server. Follow these steps:

1. From the Control Panel, double-click Networks and Dial-up

Connections, then double-click Local Area Connection.

2. Click the Properties button.

3. Click Install.

4. Click Protocol, then click Add.

5. Select AppleTalk Protocol, then click OK.

6. Close any open windows, then restart your computer.

Altri manuali per Stylus Pro 10000 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Epson Software

Epson

Epson EMP Monitor V4.21 Manuale utente

Epson

Epson SpectroProofer Mounter 44 Manuale utente

Epson

Epson EMP Monitor Manuale utente

Epson

Epson Photo PC 3000Z Manuale utente

Epson

Epson 2200 - Stylus Photo Color Inkjet Printer Foglio di istruzioni

Epson

Epson C82357 Manuale utente

Epson

Epson EMP-6100 Manuale utente

Epson

Epson Stylus Scan 2000 Manuale utente

Epson

Epson Perfection 610 Scanner Manuale utente

Epson

Epson LQ Color driver Dimensioni

Epson

Epson Zip-100S (SCSI Manuale utente

Epson

Epson EMP Monitor Manuale utente

Epson

Epson SED 1520 Series Manuale utente

Epson

Epson PowerLite Pro G5450WU Manuale utente

Epson

Epson S041885 - Storyteller Photo Book Creator Manuale utente

Epson

Epson 1640XL - Expression Graphic Arts Dimensioni

Epson

Epson Progression NX Dimensioni

Epson

Epson Stylus RIP Manuale utente

Epson

Epson Stylus Pro - Stylus Color Pro Ink Jet... Manuale utente

Epson

Epson Software Film Factory v3.0 Manuale utente

Epson

Epson PowerLite 1880 Manuale utente

Epson

Epson M00002104 Manuale

Epson

Epson PowerLite Pro Z8250NL Manuale utente

Epson

Epson MACLQ (Talk I/F for LQ Printers) Manuale utente

Manuali Software popolari di altre marche

COMPRO

COMPRO COMPROFM Manuale utente

Muratec

Muratec OFFICEBRIDGE ONLINE Manuale utente

Oracle

Oracle Contact Center Anywhere 8.1 Manuale utente

Adobe

Adobe 65007312 - Photoshop Lightroom Manuale

Avaya

Avaya NULL One-X for RIM Blackberry Manuale utente

HP ProLiant BL420c Manuale utente

PS Audio

PS Audio PowerPlay Manuale del proprietario

Brady

Brady LOCKOUT PRO 3.0 Manuale di servizio

Avaya

Avaya Interaction Center Manuale utente

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuale

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuale utente

Oracle

Oracle Application 9i Manuale utente

Acer

Acer RDM Manuale utente

Canon

Canon Vixia HF21 Manuale utente

Canon

Canon ZR950 Manuale utente

Samsung

Samsung Auto Backup Manuale utente

Polycom

Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuale utente