Equiptec G20 Mobile Manuale utente
1
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
:
G20 Assembly Manual
www.equiptec.co
1
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
Disclaimer
Recommended safety procedures to be employed by all person assembling their Equiptec Adjustable Height Platform (AHP)
Before proceeding with any assembly operations contained in this manual, you must consult with the designated Safety Professional or other responsible
party within your organization prior to attempting any activities contained herein. Your employer is responsible for your safety at all times and thus all
safety regulations, policies and procedures which have been established by your company take precedence over and supersede any information and
guidance contained herein especially as it relates to your personal safety and that of others in proximity to the work being performed. We highly recommend that you
review this assembly manual with a qualified safety professional such as a CSP or equivalent and/or any other supervisory, union or other staff at your site that are
responsible for safety related matters.
The AHP assembly procedure includes the use of powered and manual hand tools and the equipment being assembled is sometimes large and can be quite heavy. It is
comprised mostly of steel and aluminum, including some heavy-gauge structural pieces such as decks and base frames and also large ‘sheet metal’ panels such as those
found on the front and sides of the units.
Hazards may include (but are not limited to) cuts to fingers, arms etc., from metal edges, accidental contact injuries to all parts of the body such as from contact with hard
metal corners and crushing injuries due to components which are of substantial weight and could drop unexpectedly while being moved or assembled. Other physical
hazards include noise and vibration from powered tools, noise caused by contact of powered or manual tools with metal surfaces by dropping, extraneous bits of metal
from screw threads, threaded holes, etc. that could cause an eye injury, and crush injuries to fingers, hands, or any other part of the body. Therefore it is CRITICALLY
IMPORTANT that you have reviewed this manual with the assigned Safety Professional or authority at your location to ensure you have been given all the necessary PPE
and other tools and appliances needed to safely assemble the Equiptec Adjustable Height Platform.
Working at heights during assembly considerations:
Equiptec AHPs were designed to take the place of other more traditional devices for working at heights.
For the most part , your AHP should be able to be assembled from ground level. However, depending on what accessory you are fitting, or the particular situation you
are in, there may be a need to work at height during the assembly procedure. If that is the case, you will need to ensure you are protected from any potential fall from the
device as it is being assembled. This will require the use of a scissor lift, or ‘wheeled stair ladder’ that meets the ANSI and OSHA requirements for safety.
List of required PPE for persons assembling their Equiptec Adjustable Height Platform:
Note: All PPE and safety related equipment must be approved by ANSI/ASSP/ASTM/NIOSH (or other relevant, recognized and accredited body) in order to effectively
protect the assembler during the assembly process!
• Head Protection: Hardhat or Bump Cap
• Hand Protection: Crush and Cut Resistant Gloves
• Eye Protection: Safety Eyewear
• Hearing Protection: Earplugs / Earmuffs
• Foot Protection: Safety Shoes (steel or composite)
• Cut Protection: Cut resistant sleeves and/or heavey duty clothing
2
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
Assembly Instructions for your new Equiptec Giraffe G20
If any instruction is unclear, DO NOT
proceed, contact Equiptec for advice
w. www.equiptec.co
p. 1 888 523 4340
Section Unit / Accessory Kit Page
1 Giraffe G20 Base Unit 5
2 Giraffe G20 Standard Casters 21
3 Giraffe G20 1 Step Extension 25
4 Giraffe G20 2 Step Extension 34
5 Giraffe G20 4 Step Sub Chassis 43
6 Giraffe G20 8 Step Sub Chassis 75
7 Giraffe G20 Slide Out Deck 114
8 Giraffe G20 1.8m Hammerhead Deck 132
9 Contact Details 146
3
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
Configuration Options
Assemblies Section Assemblies Section
Giraffe G20 G20 Base Unit
G20 Standard Casters
1
2
Giraffe G20 + 1 Step
w Slide Out
G20 Base Unit
G20 1 Step Extension
G20 Slide Out Deck
1
3
7
Giraffe G20
w Slide Out
G20 Base Unit
G20 Standard Casters
G20 Slide Out Deck
1
2
7
Giraffe G20 + 1 Step
w Hammerhead
G20 Base Unit
G20 1 Step Extension
G20 1.8m Hammerhead Deck
1
3
8
Giraffe G20
w Hammerhead
G20 Base Unit
G20 Standard Casters
G20 1.8m Hammerhead
Deck
1
2
8
Giraffe G20
+ 2 Step
G20 Base Unit
G20 2 Step Extension
1
4
Giraffe G20
+ 1 Step
G20 Base Unit
G20 1 Step Extension
1
3
Giraffe G20
+ 2 Step w Slide Out
G20 Base Unit
G20 2 Step Extension
G20 Slide Out Deck
1
4
7
4
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
Configuration Options
Assemblies Section Assemblies Section
Giraffe G20
+ 2 Step
w Hammerhead
G20 Base Unit
G20 2 Step Extension
G20 1.8m Hammerhead Deck
1
4
8
Giraffe G20
+ 8 Step
G20 Base Unit
G20 8 Step Sub Chassis
1
6
Giraffe G20
+ 4 Step
G20 Base Unit
G20 4 Step Sub Chassis
1
5
Giraffe G20
+ 8 Step
w Slide Out
G20 Base Unit
G20 8 Step Sub Chassis
G20 Slide Out Deck
1
6
7
Giraffe G20
+ 4 Step
w Slide Out
G20 Base Unit
G20 4 Step Sub Chassis
G20 Slide Out Deck
1
5
7
Giraffe G20
+ 8 Step
w Hammerhead
G20 Base Unit
G20 8 Step Sub Chassis
G20 1.8m Hammerhead Deck
1
6
8
Giraffe G20
+ 4 Step
w Hammerhead
G20 Base Unit
G20 4 Step Sub Chassis
G20 1.8m Hammerhead Deck
1
5
8
5
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
1
Section 1 - Equiptec Giraffe G20 Base Unit
Giraffe G20 as shipped with packaging removed
6
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
1
Note: Heavy duty washers used
everywhere a bolt attaches
to a handrail extrusion
Maximum torque figures
provided to secure bolts
without deforming ‘hollow’
extruded parts
Directions for General Fixing Assembly
Nyloc Nut
Flat Washer
Handrail
Extrusion
Heavy Duty
Washer
Bolt
A
Spring
Washer
Handrail
Extrusion
Heavy Duty
Washer
Bolt
B
Heavy Duty
Washer
Flat
Washer
Bolt
C
M8 Nyloc
Nut
M8 Cap
Screw
Pivot
Joiner
D
Handrail
Extrusion
7
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
1
Step 1 - Unpack and Identify Parts
1. Remove stair assembly by
removing temporary transport
bolts each side
2. Unpack all parts and check them
against the parts list below
Description Qty
Floating Tread 5
Stair Handrail Assembly 2
Stair Midrail Assembly 2
Platform Handrail Assembly 2
Platform LH Handrail Assembly 1
Platform RH Handrail Assembly 1
Upper Platform Stair Handrail Assembly 2
Left Corner Post + Gate Assembly 1
Right Corner Post + Gates Assembly 1
8
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
1
Step 1 - Unpack and Identify Parts
Floating Tread
Stair Handrail
Assembly
Stair Midrail
Assembly
Platform Handrail
Assembly
Platform LH Handrail
Assembly
Upper Platform Stair Handrail
Assembly
Left Corner Post + Gate
Assembly
Right Corner Post + Gate
Assembly
Platform RH Handrail
Assembly
9
www.equiptec.co May 2022
Giraffe Assembly Instructions G20 - SB 2.1
1
Step 2 - Install Pump Handle
1. Install pump handle – slide into
place as shown and tighten handle
screw into indent at the base of
the handle
Pump
Handle
Grub Screw
to be
tightened
Altri manuali per G20 Mobile
4
Indice
Altri manuali Equiptec Sistema di sollevamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
