Erbauer ECS1400 Manuale utente

ECS1400

EAN: 3663602795773

ORIGINAL INSTRUCTIONS

1400W circular saw MNL_ECS1400_TPS_GB_V2_BX220IM-10-8-2020

Safety instructions 7

Product description 22

Assembly 25

Use 28

Care & maintenance 32

Guarantee 35

Declaration of conformity 36

Product description 4

Safety instructions 7

Product description 22

Assembly 25

Use 28

Care & maintenance 32

Guarantee 35

Declaration of conformity 36

1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 2 6/5/18 3:24 PM

WARNING! Please read all safety warnings carefully and be

sure that they are fully understood before handling the tool.

1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 3 6/5/18 3:24 PM

Product description

56b

10a

20a

20b

18 19

1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 4 6/5/18 3:24 PM

17 16 15

C D

20a

20b

E F

6b6a

1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 5 6/5/18 3:24 PM

G H

1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 6 6/5/18 3:24 PM

Safety instructions

GENERAL POWER TOOL SAFETY WARNING

WARNING! Read all safety warnings,

instructions, illustrations and specications

provided with this power tool. Failure to follow all

instructions listed below may result in electric shock,

re and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodied plugs and matching outlets will reduce risk

of electric shock.

1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 7 6/5/18 3:24 PM

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energising power tools that have the switch

on invites accidents.

1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 8 6/5/18 3:24 PM

d) Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away from

moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 9 6/5/18 3:24 PM

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a hazardous

situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) SERVICE

a) Have your power tool serviced by a qualied repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SAFETY INSTRUCTIONS FOR CIRCULAR SAW

CUTTING PROCEDURES

a) DANGER: Keep hands away from cutting area

and the blade. Keep your second hand on auxiliary

handle, or motor housing. If both hands are holding

the saw, they cannot be cut by the blade.

b) Do not reach underneath the workpiece. The guard

cannot protect you from the blade below the workpiece.

c) Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth of the blade teeth

should be visible below the workpiece.

1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 10 6/5/18 3:24 PM

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Erbauer Sega

Erbauer

Erbauer ERB610MSW Manuale utente

Erbauer

Erbauer ERB237MSW Manuale utente

Erbauer

Erbauer EBJ860 Manuale utente

Erbauer

Erbauer ERB2504SE Manuale utente

Erbauer

Erbauer ERB690CSW Manuale utente

Erbauer

Erbauer ERB239MSW Manuale utente

Erbauer

Erbauer ERA568RSP Manuale utente

Erbauer

Erbauer EMCS650 Manuale utente

Erbauer

Erbauer ERF298MSW Manuale utente

Erbauer

Erbauer ERB566CSW Manuale utente

Erbauer

Erbauer 3663602796244 Manuale utente

Erbauer

Erbauer ERS1100-1 Manuale utente

Erbauer

Erbauer ERB238MSW Manuale utente

Erbauer

Erbauer ERB610MSW Manuale utente

Erbauer

Erbauer ERB596CSW Manuale utente

Erbauer

Erbauer ECS18-Li Manuale utente

Erbauer

Erbauer ERB2501SE Manuale utente

Erbauer

Erbauer ERB110SSW Manuale utente

Erbauer

Erbauer ERN642ATL-I Manuale utente

Erbauer

Erbauer ERB609MSW Manuale utente

Erbauer

Erbauer ERI490CSW Manuale utente

Erbauer

Erbauer ERB611MSW Manuale utente

Erbauer

Erbauer ERB2502SE Manuale utente

Erbauer

Erbauer ETS1500-A Manuale utente

Manuali Sega popolari di altre marche

RIDGID

RIDGID BS1400 Manuale utente

ATIKA

ATIKA BWS 400-2 Manuale utente

RGC

RGC FS20 Manuale utente

Makita

Makita M2300 Manuale utente

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuale utente

IMET Spa

IMET Spa SIRIO 370 AF-E Manuale utente

Optimum

Optimum OPTisaw CS 275 Manuale utente

Makita

Makita BPB180 Manuale utente

Stihl

Stihl MS 462 C-M Manuale utente

AEG

AEG TS 250 K Manuale utente

Meec tools

Meec tools 004665 Manuale utente

Makita

Makita LS1018L Manuale utente

Ryobi

Ryobi RCS1400 Manuale utente

DeWalt

DeWalt DCS391 Manuale utente

Sealey

Sealey SA72 Manuale utente

skilsaw

skilsaw SPT88 Istruzioni per il montaggio

Urrea

Urrea SI810 Dimensioni e guida di installazione

EINHELL

EINHELL BKG 210/1 Manuale utente