other part, in all angles and depths of cut.
b) Check the operation of the lower guard spring. If the guard
and the spring are not operating properly, they must be
serviced before use.
c) Lower guard may be retracted manually only for special cuts
such as “plunge cuts” and “compound cuts.” Raise lower
guard by retracting handle and as soon as blade enters
the material, the lower guard must be released. For all other
d) Always observe that the lower guard is covering the blade
An unprotected,
coasting blade will cause the saw to walk backwards, cutting
to stop after switch is released.
ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST
Construction workers are one of the at-risk groups within this because of the dust that they
Lung cancer
Silicosis
The risk of lung disease is linked to people who regularly breathe construction dust over a
used.
