ERGATTA LITE Manuale utente

THE ERGAT TA L I T E

A S S E M B L Y M A N U A L

Touchscreen

Footboard

Rails

Forwar

Riser

Top & Botto Deck

Tank

Seat

Power Button

Handle Rest

Footpads

Rear Space

(With Bungee attached)

Handl

(Attached to Handle Belt)

M A I N P A R T S

O T H E R P A R T S

Rai x 

Touchscree

Rear Spacer with Bunge

Sea

Footboard and Foot Strap

Tank Assemb y, Top/Bottom Deck, Forward Riser, & Mounting Ar

Hand e (attached to Hand e Be t)

Do y Whee Assemb y x 

JCB Bo t × 

JCN Nut × 

Hand e Rest × 

Hand e Rest Bo t × 

5mm A en Key × 1, 4mm A en Key x 1, 1/8” A en Key x 

Footpads × 

Syphon Pump x 

Touchscreen Bot x 

Power Cord x 

USB Cab e x 

Sensor Cab e x 

Tank Stopper x 

Footpad Assemb y Card x 1

A B

H I J

L M N

T U

Q R

D E F G

Footpad Assembly Card

1Lay the rails on the floor parallel to one another. Make sure that the black extrusions are

facing the inside of the rails.

2Unscrew the our JCN Nuts rom the rear spacer, then align the rear spacer with the

holes on the rails such that the Ergatta logo is acing upwards and the bungee cord is

acing towards the ront o the rails. Fasten the rear spacer to the rails using the our

JCN Nuts and 5mm Allen Key without ully tightening at this time.

JCN Nut (x4) Allen Key

3Place the seat between the rails. The indent on the seat should face the rear spacer. All

four load wheels should sit on the black extrusion, with the guide wheels locked under

the black extrusion such that the seat cannot be lifted off the rails. Note: It may be

necessary to separate the rails slightly to fit.

4Place the tank assembly onto the rails, then using the JCB Bolts and 5mm Allen Key,

attach the tank to the rails. At this stage they should not be fully tightened.

Allen KeyJCB Bolt (x4)

5Raise the mounting arm until the legs fully extend from under the arm, then release the

arm to lock into place

6oosen the 2 bolts on the top deck using the 4mm Allen key. Assemble the footboard

between the rails to lean against the top deck. Fasten the footboard to the rails using

the JCB bolts and 5mm Allen key.

Allen KeyJCB Bolt (x4)

7Using the handle rest bolts and the 5mm Allen key, secure the handle rests in place with

the the handle notch facing downwards.

Handle Rest Bolt (x2) Allen KeyHandle Rests (x2)

Altri manuali ERGATTA Palestra domestica

ERGATTA

ERGATTA Rower Manuale utente

ERGATTA

ERGATTA Rower Manuale utente

Manuali Palestra domestica popolari di altre marche

Horizon Fitness

Horizon Fitness OXFORD 6 Manuale utente

Energetics

Energetics Multi Trainer 5.1 Manuale utente

Matrix

Matrix MG-PL Series Manuale utente

Reebok

Reebok Tbr2i Manuale operativo e di manutenzione

Weider

Weider 8300 Hard Drive Manuale utente

Pure Fitness

Pure Fitness 8526HE Manuale utente

Weider

Weider 8700 I Guida rapida

Bowflex

Bowflex Sport 001-6961 Manuale utente

NordicTrack

NordicTrack E8200 Competition Bench Guida rapida

Weider

Weider WEMC10161 Manuale utente

Body Solid

Body Solid GHYP-345 Manuale utente

Evo

Evo TAHOE 5105 Manuale utente

cardiobull

cardiobull RA17 Manuale utente

ParaBody

ParaBody 40 Manuale utente

JLL

JLL Ventus Pro Air Power Manuale utente

Trojan

Trojan Colorado 370 Manuale utente

Octane Fitness

Octane Fitness xRide xR650 Manuale utente

Precor

Precor Discovery Series Manuale utente