ERL F-PRO 116 Manuale utente

F-PRO 116

Non-Directional Multifunction & SEF Protection Relay

User

Manual

Version 1.2 Rev 0

DigitallysignedbyNorbertWegner

DN:cn=NorbertWegner,o=ERLPhasePowerTechnologies

Ltd.,ou,[email protected],c=CA

Date:2022.01.0410:48:32-06'00'

D05125R01.20 F-PRO 116 User Manual i

Preface

Information in this document is subject to change without notice.

manner whatsoever without the written permission of ERLPhase Power Technologies

Ltd. is strictly forbidden. This manual is part of a complete set of product

documentation that includes detailed drawings and operation. Users should evaluate

the information in the context of the complete set of product documentation and

their particular applications. ERLPhase assumes no liability for any incidental,

indirect or consequential damages arising from the use of this documentation.

While all information presented is believed to be reliable and in accordance with

accepted engineering practices, ERLPhase makes no warranties as to the

completeness of the information.

All trademarks used in association with L-PRO, T-PRO, F-PRO, B-PRO, S-PRO, TESLA,

iTMU, TESLA Control Panel, Relay Control Panel, RecordGraph, RecordBase and

ProLogic are trademarks of ERLPhase Power Technologies Ltd.

Windows® is a registered trademark of the Microsoft Corporation.

HyperTerminl® is a registered trademark of Hilgraeve.

Modbus® is a registered trademark of Modicon.

Contact Information

ERLPhase Power Technologies Ltd.,

Website: www.erlphase.com

Email: info@erlphase.com

Technical Support

Email: support@erlphase.com

Tel: 1-204-477-0591

ii F-PRO 116 User Manual D05125R01.20

Using This Guide

This User Manual describes the installation and operation of the F-PRO Multifunction Protection

Relay. It is intended to support the first time user and clarify the details of the equipment.

The manual uses a number of conventions to denote special information:

Example

Describes

Start>Settings>Control

Panel

Choose the Control Panel submenu in the

Set

tings submenu on the Start menu.

Right-click

Click the right mouse

butt

on.

Recordings

Menu items and tabs are shown in italics.

Service

User input or keystrokes are shown in bold.

Text boxes similar to this one

Relate important notes and information.

Indicates more screens.

Indicates further drop-down menu,

click to display list.

Indicates a warning.

 
D05125R01.20 F-PRO 116 User Manual iii 
Table of Contents 
Preface ……………………………………………………………………………….….….. i 
Contact Information...…………………………..……………………………………… i 
Using this Guide ………………………………………………………………………….… ii 
Table of Contents ……………………….…………………………………...…………… iii 
Acronyms …………………………………………………………………………….…….. v 
Version Compatibility …………………………………………….…………………….. vi 
PC System Requirements and Software Installation …………………….. vii 
1. Overview 
1.1 Introduction …………………………………....……….……….……..……….... 1-1 
1.2 Front View ………………………………………..………………….....…....……. 1-3 
1.3 Rear View ……………………………………………………….………….…........ 1-4 
1.4 Model Options/Ordering ……….………………………………......…….... 1-5 
2. Installation and Safety Instructions ......................................... 2-1 
2.1 Introduction ............................................................................. 2-1 
2.2 Physical Mounting..................................................................... 2-1 
2.3 Power Supply............................................................................ 2-2 
2.4 AC and DC Wiring...................................................................... 2-2 
2.5 Communication Wiring............................................................. 2-2 
3. Setup and Communication 
3.1 Power Supply ……………………..……………………………………………….. 3-1 
3.2 USB Link …………………………………………………………………………….…. 3-1 
3.3 Accessing the Relay’s SCADA Services ………………………………...…3-3 
3.4 Communication Port Details ………..……………………………………..… 3-4 
3.5 Time Source.……………………………………....................................... 3-5 

 
iv F-PRO 116 User Manual D05125R01.20 
 
Using the IED (Getting Started) 
1 Start-up Sequence …………………………………………………………………. 4-1 
2 Front Panel Display ……………………………………………………………..…. 4-1 
3 Terminal Interface………………………………………………………............. 4-7 
Protection Functions and Specifications 
1 Current Protection Functions………………………………………………….. 5-1 
2 Monitoring Functions……………………………………………………………... 5-17 
3 Control Functions…………………………………………………………………… 5-18 
4 ProLogic…………………………………………………………………………………. 5-19 
5 Group Change Control Statement………………………………………….. 5-20 
6 Event Log……………………………………………………………………………….. 5-21 
7 Fault Log………………………………………………………………………………… 5-21 
Data Communications 
1 Introduction………………………………………………………………………….. 6-1 
2 SCADA Protocol………………………………………………………………..…… 6-1 
Settings and Analysis Software 
1 Offliner Setting Software ………………………………………………………. 7-1 
2 Offliner Features ……………….………………………………………………….. 7-2 
3 Offliner Keyboard Shortcuts …………….……………………………………. 7-4 
4 Handling Backward Compatibility ………..…………………………….…. 7-5 
5 Main Branches from the Tree View ………….………………………..…. 7-7 
Acceptance Test Guide 
1 Acceptance Testing ……………………………………………………………….. 8-1 
 

 
D05125R01.20 F-PRO 116 User Manual v 
 
Appendix A IED Specifications …………….………………………………………..……..….. A-1 
A.1 IDMTL Element OperatingTime Curves ………………………….………. A-5 
Appendix B IED Settings and Ranges ……………………..……………………..…………. B-1 
Appendix C Hardware Description …………………………..………………….…………… C-1 
Appendix D Event Messages ………………………….………………….………….………….. D-1 
Appendix E Modbus RTU/ ASCII Communication Protocol ……………….…….….………. E-1 
Appendix F IEC 103 Device Profile ………………………………………………..…………… F-1 
Appendix G DNP3.0 Device Profile……………………………………………………..……… G-1 
Appendix H Mechanical Drawings ……………………………………………….….………… H-1 
H.1 Front View ………………………………….…………….……………..……………. H-1 
H.2 Rear View ………………………………….…………….……………..…………….. H-2 
Appendix I AC Schematic Drawing ……………………….…………………….…………… I-1 
Appendix J DC Schematic Drawing …………………………………………….…………… J-1 
Appendix K Connection Diagram……………………………….……………………………. L-1 
Appendix L F-PRO Setting Example ………………………….………………………………. M-1 
 

vi F-PRO 116 User Manual D05125R01.20

Acronyms

CT - Current Transformer

DCE - Data Communication Equipment

HMI - Human Machine Interface

IEC - International Electro-technical Commission

IED - Intelligent Electronic Device

LED - Light-emitting Diode

LCD - Liquid Crystal Display

LHS - Left Hand Side

RHS - Right Hand Side

SG - Setting Group

UI - User Interface

D05125R01.20 F-PRO 116 User Manual vii

Version co

mpatibility

This chart indicates the versions of Offliner Settings, this User Manual was created using the

following software and firmware versions.

Offliner Settings are backward compatible with all earlier versions of setting files.

F-PRO Firmware/Software Compatibility

Guide

F-PRO Firmware

Setting

Version

Compatible Offliner

Settings

V1.2

V3.1

Please contact ERLPhase Technical support for complete Revision History.

viii F-PRO 116 User Manual D05125R01.20

PC System Requirements and Software Installation

Hardware

The minimum hardware requirements are:

•1 GHz processor

•2 GB RAM

•20 GB available hard disk space

•USB port

•Serial communication port

Operating System

One of the following operating systems must be installed and functional prior to installing the

applications:

•Microsoft Windows 7

•Microsoft Windows 10

ERLPhase software requires a minimum of Windows 7 OS.

Software Installation

All required software for user interface and settings (F-PRO Offliner) are available directly from

the ERLPhase website: www.erlphase.com. The following relevant software and documentation

is available:

•F-PRO Offliner: Software

•USB STM32 –VCP Driver for F-PRO 116: Software (not required for Windows 10)

•Relay User manual: Manual in PDF format

To Install Software on the Computer

To install the software on the computer, click the desired item on the screen. The installation

program launches automatically. Installation may take a few minutes to start.

A terminal software (HyperTerminal for example) and USB STM32 VCB driver also to be installed.

Anti-virus/Anti-spyware Software

If antivirus/anti-spyware software on user local system identifies any of the ERLPhase applications

as a “potential threat”, it will be necessary to configure user antivirus/anti-software to classify it

as “safe” for its proper operation. Please refer the appropriate antivirus / anti-spyware software

documentation to determine the relevant procedure.

Altri manuali per F-PRO 116

Indice

Altri manuali ERL Staffetta

ERL

ERL F-PRO 5100 Manuale utente

ERL

ERL F-PRO 116 Manuale utente

ERL

ERL MIT161 Guida utente

ERL

ERL B-PRO Manuale utente

ERL

ERL T-PRO 4000 Manuale utente

ERL

ERL L-PRO 4000 Manuale utente

ERL

ERL T-PRO Manuale utente

Manuali Staffetta popolari di altre marche

Shelly

Shelly Pro Series Manuale utente

GE MVAX 11 Manuale utente

ABB

ABB RELION REF615R Manuale utente

Pilz

Pilz PNOZ X10 Manuale del proprietario

ABB

ABB SPAJ 142 C Manuale elenco delle parti

Kemo Electronic

Kemo Electronic B197 Manuale utente

Seg

Seg MRM3 Manuale utente

Basler

Basler BE1-700C Manuale utente

CD Automation

CD Automation REVEX 2PH 280A Manuale utente

Ruelco

Ruelco 1S04 Manuale utente

Basler

Basler V3E Z1P B2C1F Manuale utente

Doepke

Doepke Dupline DSM 2 Manuale utente

Siemens

Siemens SIRIUS 3RT1966-4D Manuale utente

GE DGP Manuale utente

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Manuale utente

Siemens

Siemens SIPROTEC 4 Manuale utente

Siemens

Siemens BD2-AK03X/FS Series Manuale utente

Leuze

Leuze MSI-SR5B Manuale utente