ESAB LKB 265 Manuale utente

LKB 265 Valid from Serial NO 523 XXX--XXXX

LKB 320 Valid from Serial NO 521 XXX--XXXX

455 466 -- 001 99.09.29

LKB 265

LKB 320

101103105107109111102021110025108024042106023061104022041100020040060001

Bruksanvisning

Brugsanvisning

Bruksanvisning

Käyttöohjeet

Instruction manual

Betriebsanweisung

Manuel d’instructions

Gebruiksaanwijzing

Instrucciones de uso

Istruzioni per l’uso

Manual de instruções

Ïäçãßåò ÷ñÞóåùò

-- 2 --

Rätt till ändring av specifikationer utan avisering förbehålles.

Ret til ændring af specifikationer uden varsel forbeholdes.

Rett til å endre spesifikasjoner uten varsel forbeholdes.

Oikeudet muutoksiin pidätetään.

Rights reserved to alter specifications without notice.

Änderungen vorbehalten.

Sous réserve de modifications sans avis préalable.

Recht op wijzigingen zonder voorafgaande mededeling voorbehouden.

Reservado el derecho de cambiar las especificaciones sin previo aviso.

Specifiche senza preavviso.

Reservamo--nos o direito de alterar as especificações sem aviso prévio.

Äéáôçñåßôáé ôï äéêáßùìá ôñïðïðïßçóçò ðñïäéáãñáöþí ×ùñßò ðñïåéäïðïßçóç.

SVENSKA 3..............................................

DANSK 11................................................

NORSK 19................................................

SUOMI 27................................................

ENGLISH 35..............................................

DEUTSCH 43.............................................

FRANÇAIS 51.............................................

NEDERLANDS 59.........................................

ESPAÑOL 67..............................................

ITALIANO 75..............................................

PORTUGUÊS 83..........................................

ÅËËÇÍÉÊÁ 91.............................................

Schema -- Skema -- Skjema -- Johdotuskaavio -- Diagram --

Schaltplan -- Schéma -- Esquema -- Esquema --

ÄéÜôáîåéò áýíäåóçò 99....................................

Reservdelsförteckning -- Reservedelsfortegnelse --

Reservedeloversikt -- Varaosaluettelo -- Spare parts list --

Ersatzteilverzeichnis -- Liste de pièces détachées --

Reserveonderdelenlijst -- Lista de repuestos -- Esercizio --

Lista de peças de reposição -- Ðßíáêáò áíôáëëáêôéêþí 103....

ENGLISH

TOCe -- 3 5 --

1 DIRECTIVE 36........................................................

2SAFETY 36...........................................................

3 INTRODUCTION 37...................................................

3.1 TECHNICAL DATA: LKB 265 37...............................................

3.2 TECHNICAL DATA: LKB 320 38...............................................

4 INSTALLATION 39....................................................

4.1 Mains supply 39..............................................................

4.2 Assembly of components 40...................................................

4.3 Electrical installation 40.......................................................

4.4 TECHNICAL DESCRIPTION 41................................................

5 MAINTENANCE 42....................................................

6 ORDERING OF SPARE PARTS 42......................................

7 ACCESSORIES 42....................................................

DIAGRAM 99.........................................................

SPARE PARTS LIST 103................................................

-- 3 6 --

bc14d12e

1 DIRECTIVE

DECLARATION OF CONFORMITY

Esab Welding Equipment AB, 695 81 Laxå, Sweden, gives its unreserved guarantee

that welding power source LKB 265/320 from serial number 523/521 complies with

standard EN 60974--1, in accordance with the requirements of directive (73/23/EEA)

and addendum (93/68/EEA).

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------

Paul Karlsson

Managing Director

Esab Welding Equipment AB

695 81 LAXÅ

SWEDEN Tel: + 46 584 81000 Fax: + 46 584 12336

Laxå 95--11--10

2SAFETY

WARNING

READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.

ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-

TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE

BASED ON MANUFACTURERS’ HAZARD DATA.

ELECTRIC SHOCK -- Can kill

SInstall and earth the welding unit in accordance with applicable standards.

SDo not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.

SInsulate yourself from earth and the workpiece.

SEnsure your working stance is safe.

FUMES AND GASES -- Can be dangerous to health

SKeep your head out of the fumes.

SUse ventilation, extraction at the arc, or both, to keep fumes and gases from your breathing zone and

the general area.

ARC RAYS -- Can injure eyes and burn skin.

SProtect your eyes and body. Use the correct welding screen and filter lens and wear protective

clothing.

SProtect bystanders with suitable screens or curtains.

FIRE HAZARD

SSparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.

NOISE -- Excessive noise can damage hearing

SProtect your ears. Use ear defenders or other hearing protection.

SWarn bystanders of the risk.

MALFUNCTION -- Call for expert assistance in the event of malfunction.

PROTECT YOURSELF AND OTHERS!

-- 3 7 --bc14d12e

3 INTRODUCTION

LKB 265 and LKB 320 are step controlled power sources in a compact design, in-

tended for welding with solid steel, stainless steel or aluminium wire as well as tubu-

lar wire with or without shielding gas.

The possibility of welding with homogeneous wire/shielding gas and welding with

gasless tubular wire is obtained by switching the + and -- connections on the switch-

ing terminal above the wire feed unit.

3.1 TECHNICAL DATA: LKB 265

Standard delivery:

Power source equipped with spot welding function and adjustable burnback time.

Integrated wire feed mechanism with feed roller for solid wire, diameter 0.8, and 1.0.

Welding torch PSF 250 4.5 m.

Return cable 4.5 m with return clamp.

Mains cable 3 m and gas hose.

Includes: Handle, (fitted with 2 screws,) gas cylinder shelf (fitted with 2 screws).

Voltage 400--415 V, 350 Hz 230/400--415/500V350Hz

230/440--460V, 360Hz

Permissible load at

100% duty cycle 150 A/22 V 150 A/22 V

60 % duty cycle 190 A/24 V 190 A/24 V

30 % duty cycle 265 A/27 V 265 A/27 V

Setting range (DC) 30A/15V--265A/27V 30A/15V--265A/27V

Open circuit voltage 15--38 V 15--38 V

Open circuit power 50 W 50 W

Efficiency 0.69 0.69

Power factor 0.97 0.97

Control voltage 42 V, 50/60 Hz 42 V, 50/60 Hz

Dimensions lxwxh 770x520x620 770x520x620

Weight 92 kg 92 kg

Enclosure class IP 23 IP 23

Application classification

LKB 265 comply with the requirements of IEC 974--1.

-- 3 8 --

bc14d12e

3.2 TECHNICAL DATA: LKB 320

Standard delivery:

Power source equipped with switch for 2/4 step trigger action with gas pre--flow and

gas post--flow in the 4 step mode and adjustable burnback time.

Integrated wire feed mechanism with feed roller for solid wire, diameter 1.0, and 1.2.

Welding torch PSF 315 4.5 m.

Return cable 4.5 m with return clamps.

Mains cable 5 m and gas hose.

Includes: Handle, (fitted with 2 screws,) gas cylinder shelf (fitted with 2 screws).

Voltage 400--415 V, 350 Hz 230/400--415/500V350Hz

230/440--460V, 360Hz

Permissible load at

100% duty cycle 195 A/24 V 195 A/24 V

60 % duty cycle 250 A/27 V 250 A/27 V

30 % duty cycle 320 A/30 V 320 A/30 V

Setting range (DC) 40A/16(14)V--320A/30V 40A/16(14)V--320A/30V

Open circuit voltage 16--40 V 16--40 V

Open circuit power 52 W 52 W

Efficiency 0.71 0.71

Power factor 0.97 0.97

Control voltage 42 V, 50/60 Hz 42 V, 50/60 Hz

Dimensions lxwxh 770x520x620 770x520x620

Weight 112 kg 112 kg

Enclosure class IP 23 IP 23

Application classification

LKB 320 comply with the requirements of IEC 974--1.

The IP code indicates the enclosure class, i.e. the degree of protection against pene-

tration by solid objects and water.

Equipment marked IP 23 is designed for in-- and outdoor use.

The symbol indicates that the power source is designed for use in areas where

there is an increased electrical hazard.

-- 3 9 --bc14d12e

4 INSTALLATION

WARNING

This product is intended for industrial use. In a domestic environment this prod-

uct may cause radio interference. It is the users responsibility to take adequate

precautions.

Installation must be carried out by a qualified electrician.

Connect the power supply lead using the appropriate fuse in conformance with local

regulations.

Cable areas acc. to Swedish regulations.

Make sure the welding rectifier is not covered or positioned so that cooling is ob-

structed.

4.1 Mains supply

LKB 265 350 Hz 350 Hz 350 Hz 360 Hz 360 Hz

Voltage V 230 400/415 500 230 450

Current A 100% 13 7511 7

60% 18 9818 9

30% 27 16 13 27 16

Mains lead rating mmΟ4x2.5 4x1.5 4x1.5 4x2.5 4x1.5

Fuse slow A 20 16 16 20 16

LKB 320 350 Hz 350 Hz 350 Hz 360 Hz 360 Hz

Voltage V 230 400/415 500 230 450

Current A 100% 16 9716 8

60% 24 14 11 23 12

30% 35 20 17 34 18

Mains lead rating mmΟ4x4 4x2.5 4x2.5 4x4 4x2.5

Fuse slow A 20 16 16 20 16

IMPORTANT!

To prevent the reel sliding off the hub: Lock the reel in place

by turning the red knob as shown on the warning label atta-

ched next to the hub.

-- 4 0 --

bc14d12e

4.2 Assembly of components

ba14s0

4.3 Electrical installation

ba14s

006

ba14s0

230V 50/60 Hz

LKB265 2,5 mm@

LKB320 4 mm@

400--415V 3~50 Hz

ba14s

002 ba14s0

230V

440--460V

500V TC1

XT2

Solid wire Tube wire

-- 4 1 --bc14d12e

4.4 TECHNICAL DESCRIPTION

The power sources can be equipped with instrument to display the current and volt-

age.

The instruments have a hold function and can be calibrated.

A thermal cut--out prevents overheating.Resetting takes place automatically when

the power source has cooled.

SA -- Space for digital meters (optional)

SB -- Voltage selector, 10--step

SC -- Voltage selector , 4--step

SD -- Main switch, on/off

SE -- Mains indicator lamp

SF -- Thermal overload warning lamp, lights up in case of overheating

SG -- Welding torch connection

SH -- Potentiometer (wire feed)

SJ -- Inductance connection

SK -- Potentiometer (spot welding)

ba14s005

-- 4 2 --

bc14d12e

5 MAINTENANCE

Regularly maintenance is important for reliable and safe operations.

SBlow down the power source with dry, compressed air at a low pressure.

SCleaning and replacement of the wire feed mechanism’s wear parts should take

place periodically to ensure trouble free wire feed.

Note that an excessive pressure setting can result in abnormal wear on the pres-

sure roller, feed roller and wire liner.

SBlow clean the wire liner regularly and clean the gas nozzle.

WARNING!

Rotating parts can cause injury, take

great care.

6 ORDERING OF SPARE PARTS

A service manual and list of spare parts can be ordered through your nearest ESAB

representative, see the last page of this booklet.

When ordering spare parts please specify the machine model, serial number and the

designation and order numbers of parts as shown in the list of spare parts. This sim-

plifies dispatch and ensures correct delivery.

7 ACCESSORIES

1 Meter glass 455 172--001

2 Meter kit 456 008--880

3 Transformer kit 456 010--880

ba14s0

Altri manuali per LKB 265

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ESAB Sistema di saldatura

ESAB

ESAB MEK 4C Manuale utente

ESAB

ESAB A6 Slide Manuale utente

ESAB

ESAB Caddy Arc 201i VRD Manuale utente

ESAB

ESAB Aristo WeldCloud Mig U5000i Manuale utente

ESAB

ESAB Rogue Series Manuale utente

ESAB

ESAB A6S Compact 300 Manuale utente

ESAB

ESAB Aristo Arc 4000i Manuale utente

ESAB

ESAB LHI 825 Guida

ESAB

ESAB PT-31XL Manuale utente

ESAB

ESAB Precision Plasmarc IEFC-S PT-24 Istruzioni generali

ESAB

ESAB ST-21 Manuale utente

ESAB

ESAB MultiMaster 160 Manuale utente

ESAB

ESAB Fabricator 181i Manuale utente

ESAB

ESAB Warrior 500i CC/CV Manuale utente

ESAB

ESAB A6 Mastertrac Manuale utente

ESAB

ESAB Mig 4004i Manuale utente

ESAB

ESAB Caddy Mig C200i Manuale utente

ESAB

ESAB Powercut 875 Manuale utente

ESAB

ESAB YardFeed 200 Manuale utente

ESAB

ESAB Aristo Mig 5000i Manuale utente

ESAB

ESAB Aristo FeedMech 4804 Manuale utente

ESAB

ESAB Origo Tig 3001i Manuale utente

ESAB

ESAB Caddy Tig 2200i AC/DC Manuale utente

ESAB

ESAB ES 95i Manuale utente

Manuali Sistema di saldatura popolari di altre marche

Berner

Berner PLASMACUT 54 Manuale utente

Pro Spot

Pro Spot PR-155 Manuale utente

Forney

Forney 210 Manuale utente

Thermal Arc

Thermal Arc 400S Manuale utente

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuale utente

GYS

GYS PROTIG 201 AC/DC Manuale utente

TAFA

TAFA 30*8B35 Manuale utente

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuale utente

CIGWELD

CIGWELD 636804 Guida rapida

Red-D-Arc

Red-D-Arc DC-400 Manuale utente

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuale utente

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuale utente

WIA

WIA Weldmatic 270 CP132-2 Manuale utente

Sonics

Sonics H520T Manuale utente

Miller

Miller Big Blue 400D Manuale utente

NewArc

NewArc RT2000 Guida rapida

Hypertherm

Hypertherm powermax1000 Manuale utente

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manuale utente