Escort Entourage CIS Manuale utente
Installation Guide
GPS vehicle security, recovery
and location awareness
1
Welcome!
The ESCORT® Entourage™ CIS vehicle security, recovery & GPS locator device powered by Blackline GPS™ is a state-of-the-art
protection solution for cars, trucks, SUVs, minivans, RVs, motorcycles, and other vehicles.
Entourage CIS is conveniently installed in a hidden location within a vehicle. This ensures stealthy operation while continuing
to deliver high performance GPS tracking. Entourage CIS must be hard-wired to a vehicle’s 12 VDC or 24 VDC battery system.
Please note that Entourage CIS is designed for vehicles driven regularly
and is not designed as a long-term storage security solution.
In the box
The following items are included within the Entourage CIS packaging.
•Documentation kit
•1 Entourage CIS device with built-in 2 meter (6.5 feet) power cord
•1 MyPass™ wireless key fob
•2 wiring taps (for splicing into vehicle power)
•1 set of Velcro® mounting fasteners
•4 mounting screws
2
Installation
ESCORT recommends that an automotive service center perform this work for you. Installation time varies depending on the
installation location and your vehicle model. Installation requires approximately 30 to 90 minutes.
Please read the following installation instructions before you begin.
Tools
To install Entourage CIS, you will need the following tools:
•Automotive test light
•Pliers
•Wire-strippers (optional)
•Phillips #2 Screwdriver (optional)
•Drill with a 1/8”(3mm) bit (optional)
3
Choose where to install Entourage CIS
Prior to installation, ensure that you and your customer agree upon the Entourage CIS installation location
When choosing a location to place the Entourage CIS device, consider the following:
•Choose a location near 12VDC or 24VDC power
•Choose a location within the vehicle that is well hidden, but easily accessible for any possible future service
• Donotplaceinanobvious,clearly-visiblelocation, such as under the steering column or in the glove compartment
•Donot completely enclose Entourage CIS within metal or carbon fiber. This will affect tracking of GPS satellite signals
and cellular (wireless) communication
•Entourage CIS must be installed inside the interior of the vehicle
•Entourage CIS does not need to be mounted in direct view of satellites
•You may mount Entourage CIS behind plastic panels, under upholstery, and behind wood or fiber-board
•Mount Entourage CIS so its top side (with the logo and button) faces away from the mounting surface and toward the
interior of the vehicle (it’s ok to be mounted upside down, if needed)
•For optimum GPS performance, it is critical that there is a minimum of 6” of clearance between the Entourage CIS
enclosure top and metallic surfaces/objects
•Never install Entourage CIS in a location that could interfere with an airbag, seatbelt, or the operation of other
safety systems
4
Hardwiring Entourage CIS
Entourage CIS is hardwired to the vehicle’s power system with its built-in 2m (6.5’) power cable. Entourage CIS is compatible
with both 12VDC and 24VDC vehicle power systems. Entourage CIS must be wired to a continuous source of power that is
not controlled by the ignition key. This ensures the internal back-up battery is fully charged at all times.
Entourage CIS consumes approximately 20 mA of current at 12 VDC. This is a small current draw, and is not sufficient to drain
the vehicle’s battery provided that the vehicle is driven regularly.
Entourage CIS features an internal fuse–an external fuse is not required.
5
The easiest method to hardwire Entourage CIS is as follows:
• Usingtheautomotivetestlight,identifyanon-switched 12V / 24V wire
(a wire not controlled by the ignition key). Please note: Entourage CIS
consumes up to 1A peak current in very short bursts.
• Disconnectthenegativeconnectiontothevehicle’sbattery
• Routethepositivewiretothenon-switched12V/24Vwire
• Routethenegativewiretoavehiclegroundwire(orchassisground)
• Placeoneofthesuppliedwiringtapsoverthevehicle’s
non-switched 12V / 24V wire
• InsertEntourageCIS’sun-stripped positive wire into the wiring tap (see #1 in illustration)
• Useplierstocompress the U-contact blade, connecting the two wires (see #2 in illustration)
• Closethehingedtopcoveruntilsecurelylatched(see #3 in illustration)
• Usingthesecondwiringtap,repeatthesameprocessforthegroundwire
1
2
3
Entourage CIS
Wire
Vehicle Wire
6
Other methods to hardwire Entourage CIS include:
•Wiring Entourage CIS directly to the vehicle’s battery terminals. This is an advanced technique, and not described
within this guide
•Hardwiring Entourage CIS to the vehicle’s power system using soldering techniques. Soldering techniques are not
described within this document. Consult an installation professional for more information
Verifying installation
Verifying Installation
To verify the installation at any time after the Entourage CIS has been connected to power:
· Ensure that the ignition key is in the off position
· Wait 5 seconds and then press and release the red Entourage CIS button
If the power cable has been correctly connected, the green indicator light will either blink slowly or turn on continuously for
2 minutes.
7
If the power cable has been incorrectly connected, either no indicator lights turn on or the red and green indicator lights will
blink rapidly for 5 seconds. In this case:
· Power is not connected, or
· Power is connected with the incorrect polarity, or
· The circuit is controlled by the ignition key
Adjust the electrical connection, and verify again.
Entourage CIS indicator light sleep mode
Entourage CIS features a status indicator light sleep mode to ensure stealth operation. After a few minutes, the indicator
lights will automatically turn off while the device continues to operate. To awaken the status lights, press the power button
once and release.
8
Mounting Entourage CIS
There are two methods to mount Entourage CIS. The first uses the supplied Velcro fasteners:
•Ensure that the vehicle mounting surface is clean and dry
•Adhere the mated pair of Velcro fasteners to Entourage CIS as shown below
(do not separate the Velcro-mated pair)
•Peel the adhesive backing and press Entourage CIS into place–
to allow adhesive to set, do not remove for 24 hours
The second mounting method uses the supplied screw fasteners:
•Use the Entourage CIS enclosure as a template to mark the screw locations on the mounting surface
•Pre-drill screw holes with a 1/8”(3mm) drill bit
•Holding the Entourage CIS enclosure over the pre-drilled holes, fasten it into place using the screws and a screw driver
•Tighten the screws until they are firmly in place. Donotover-tighten
Helpful information is available at www.BlacklineGPS.com/support. Additional resources are available online from within your network account
located on the Help page.
12
Altri manuali per Entourage CIS
2
Indice
Altri manuali Escort Rilevatore radar
Escort
Escort Passport Max2 Manuale utente
Escort
Escort Passport 9500ix Manuale utente
Escort
Escort PASSPORT 9500ci Manuale utente
Escort
Escort Passport SR1 Manuale utente
Escort
Escort MAX 3 Manuale utente
Escort
Escort PASSPORT iQ Manuale utente
Escort
Escort PASSPORT 8500CI Plus Manuale utente
Escort
Escort max 360c Manuale utente
Escort
Escort Passport MAX Manuale utente
Escort
Escort Max 360 Manuale utente
Escort
Escort Passport 9500ix Manuale utente
Escort
Escort Passport MAX Manuale utente
Escort
Escort ESCORT MAX Ci Manuale utente
Escort
Escort Solo S3 Manuale utente
Escort
Escort Passport 9500ix Manuale utente
Escort
Escort SOLO S2 Manuale utente
Escort
Escort PASSPORT 8500CI Plus Manuale utente
Escort
Escort Passport 9500i Manuale utente
Escort
Escort Passport 8500 Manuale utente
Escort
Escort Passport 8500 X50 Manuale utente
