Radenso Pro M-Edition Manuale utente
Congratulaons on your new investment. You chose one of the best high-tech, GPS enabled, mobile
radar and laser detector available on the market today. The Radenso Pro M-Edion is the evoluon of
the Radenso equipped with an addional circuit designed to detect the newest Multaradar and Gatos
RT 3 delivering astonishing detecon range on all radar bands. Coupled with mulple filters against
annoying false alerts your Radenso Pro M-Edion will alert only when it counts.
Foreword
Extremely sensive high performance windshield mounted radar detector.
Longest detecon range on all bands.
Multaradar and Gatso RT 3 capable.
Selectable X, K, Ka narrow, MRCD, MRCT and Gatso radar bands tuned to the exact radar
frequencies used in North America for increased range and reduced false alarms.
Selectable Ka POP radar band (ON/OFF).
Selectable 2-level Traffic Sensor Rejecon Filter (TSR Low and TSR High).
Selectable 2-level filter for MRCD bands.
Selectable Ka band filter.
Highway, City and AutoCity Mode.
Revoluonary Auto City Mode with selectable band filtering based on speed sengs.
MUTE Mode mutes all K and X band alerts as long as it is acvated. Ka and Laser alerts are
not muted.
Bright, Dim and Dark Display modes.
Smart Dark Display Mode (turns on display only for alerts).
Bright Alphanumeric LED display.
AutoMute reduces volume of alerts aer 2 seconds.
Preloaded GPS Speed and Red Light Camera database.
Unlimited free lifeme updates for database and firmware - no obsolescence ever.
7 selectable display modes (Speed/Time, Speed/Voltage, Baery/Voltage, Time, Speed,
Speed/Compass).
Displays radar frequency during visual alert.
Voice Alerts with frequency announcement during alert.
Mark your own POI locaons for future alerts.
GPS lockout of false alert areas.
User-friendly, easy intuive voice-guided feature secon.
Large sucon cups for firm, secure installaon on windshield.
Power Cord with Power ON/OFF buon.
Oponal Direct Wire power cord available.
1 year manufacturer’s warranty.
1. Slide the windshield mounng bracket into the QuickMount slot at the front of the radar detector.
2. Plug the small end of the power cable into the power jack on the Radenso Pro-M on the le side and
connect the large plug with the 12V power socket in your car.
3. Press the red buon at the large end of the power cable (at the 12V socket) to turn the power cable
on. The buon will light up and indicate if Power is on.
4. Press the Power buon (le buon on top of unit) for 2 seconds to turn on Radenso PRO M. Unit will
power up with the start-up sequence. Aer a few seconds, the Radenso Pro-M will nofy you with a
voice message that the satellite is connected.
5. Adjust the volume level by pressing the volume buons “+2 or ”-” located on the right side of the
unit.
Radenso Pro-M is now ready to go. If you want to change any of the default sengs of your unit please
refer to the next pages.
To start using your Radenso Pro-M radar detector follow these easy steps:
The Radenso Pro-M is one of the most powerful radar detectors in the industry. It’s designed to protect
the driver from speeding ckets/fines. The Radenso Pro-M communicates with the driver in English and
it’s main funcons are the detecon of microwave radars (X / K / Ka narrow bands), laser guns, red light
cameras and fixed- speed cameras (GPS database).
When a radar signal is detected, the driver will be alerted by a visual text warning and a voice/tone
alert. The display and voice alert will indicate the detected radar band, frequency and signal strength. A
beeping warning tone will increase its intensity with increasing signal strenght. The signal strenght has
ten levels. GPS alerts are reported by voice; for example “Speed Camera”.
Noficaons:
Radar Horn Antennaand
Laser Lens
Needs unobstructed view of
the road ahead. Do not mount
behind metal coated wind-
shields or wipers.
Release Buon
Press this buon and slide the
windshield mount unl it is
locked. Press buon to unlock
the mount for removal.
Power/Menu Boon
Short press: You will enter into
setup menu. During an alert
pressing the buon mutes the
volume. The next alarm will be
reported again with the Default
volume.
Long press: Turn unit ON / OFF.
Volume Buons [+ -]
Short press: Changing volume of
the Radenso Pro-M or change
program opons in the Menu
Mode.
Power Jack
Plug power card into this port.
Mode/Sensivity/Mark Buon
Short press: Scroll between High-
way/City/AutoCity modes.
Long press: Add your own POI
GPS point for future alarms.
Display/Alert Lockout Buon
Short press: Select display bright-
ness (bright, dim, smart dark, full
dark).
Long press: Lockout alert loca-
on.
USB Port
Connect USB data cable to
update database and/or firm-
ware from our website.
Windshield Mount Slot
Insert the windshield mount into
this slot unl you hear the “click”.
Alphanumeric Display Raden-
so Pro-M will show selected
display mode, visual alerts and
text messages.
1. Place the nipple of the sucon cups
in the large hole of the bracket and
pull the sucon cup into the small
hole to secure them. Push the
rubber damper into the hole in the
middle of the bracket.
3. Insert the windshield mount into the
slot at the front of the detector unl
it is locked in posion.
4. Plug the small end of the power cable into the detector (located on the le side) and the large end
into your vehicle’s 12V ACC socket.
5. To remove Radenso Pro-M from the windshield press the release buon on top of the unit and slide
the unit off the mount.
2. Aach the windshield mount to the desired area of the windshield. Make sure it is in a level posion
parallel to the road ahead. To adjust the angle if necessary, gently push or pull on the bracket to bend
it. DO NOT use the detector to bend the bracket.
For firm and secure adhesion to the windshield, clean the windshield and sucon cups before usar
installing.
The Radenso Pro-M windshield mount allows a firm and secure installaon of the radar detector at
the windshield of your vehicle. Locate an area at the windshield that enables an unobtrusive installa-
on with clear view to the road ahead.
Rubber Damper
Le buon: MENU / ON-OFF.
Short press: You will enter into setup menu. During an alert pressing the buon will mute the volume.
The next alarm will be reported again in the standard volume.
Long press: Turn ON / OFF Radenso Pro-M.
Short press: You can scroll between Highway / City / Auto City modes. In City or Auto City modes the
sensivity of X / K / Ka bands can be reduced according to user preference.
Long Press: Add your own POI GPS point for future alarms.
Short press: Changing alert volume of Radenso Pro-M or change program opons while in Menu
Mode.
Short press: You can change the brightness of the display -> Bright -> Dim -> Smart Dark -> Full Dark.
Bright: Brightest display seng.
Dim: Slightly dimmed display.
Smart Dark: Display is deacvated but will come on with text warning during an alert.
Full Dark: Display is completely deacvated. Only voice and tone alerts are acve.
Long Press: Holding the buon for 2 seconds during an obvious false alert will lockout the locaon in
the future. The signal will then be reported and the alarm suppressed when passing the market locaon
again. You can reacvate the locaon again by holding the buon when approaching the marked loca-
on.
During start up: Pressing and holding the buon during startup will reset the Radenso Pro-M to factory
reset sengs and will display the uploaded Firmware version.
Press le buon to enter Menu Mode.
Press le buon again to go from one menu opon to the next.
Press VOLUME + or – buon (on the right side of detector) to change your seng within the category.
To save the changed selecon simply wait a few seconds without pressing any buon. The unit will
display “Seng Completed” to confirm your selecon. Alternavely, you can leave the menu and save
the seng by tapping the right buon.
The AutoCity driving mode allows the seng of minimum alert detecon speed for signal suppression
and signal filtering resulng in significantly reduced false alerts. Select AutoCity in Seng Mode.
Seng AutoCity speed: (feature selectable only if Seng Mode is set to AutoCity): Tapping the Middle
buon lets you select the speed for eding
To change the sensivity of signal recepon use + / - buon on the side of the unit. The level of signal
suppression can be selected in the range 0-9. The displayed numbers indicate the sensivity reducon
in the different radar bands. The example displayed above indicates that the X Band sensivity is
reduced by 50%, K Band sensivity reduced by 20% and Ka Band sensivity is not reduced at all (0%
reducon).
Le speed seng indicates the speed below which the radar recepon of the detector will be complete-
ly disabled (in example above 20 mph). No signals from police radar or false signals from automac door
openers will be reported.
The right speed seng indicates the speed below which the detector will detect alerts in City mode
with reduced radar sensivity (in example above 40 mph).
+ / - buons on the right side of the detector will change the specific speed seng.
RECOMMENDATION “20” and “35”: The detector will not alert to any signal below 20 mph and will
operate with reduced radar recepon between 20 and 35 mph. Maximum detector sensivity will be
achieved above 35 mph.
Seng City and AutoCity sensivity (this opon is available only in City or AutoCity Mode): By means of
the Middle buon you can select the radar band for eding.
Indice
Altri manuali Radenso Rilevatore radar
